Kreslení Uchopit

Uchopování znamená "přilepení" následujících 3D bodu k existujícímu bodu. Uchopování je dostupné u většiny nástrojů v Kreslení a

Architektuře a může být globálně zakázkáno nebo povoleno příkazem Kreslení Přepínač uchopování

Available snap locations

File:Snap Angle.png Angle: the special cardinal points of circles and arcs, at 45° and 90°
File:Snap Center.png Center: the center point of arcs and circles
File:Snap Endpoint.png Endpoint: the endpoints of line, arc and spline segments
File:Snap Extension.png Extension: on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap
File:Snap Grid.png Grid: the nodes of the Draft grid, if visible.
File:Snap Intersection.png Intersection: the intersection of 2 line or arc segments. Hover the mouse over the two desired bjects to activate their intersection snaps
File:Snap Midpoint.png Midpoint: the middle point of line and arc segments
File:Snap Near.png Near: the closest point on the nearest object
File:Snap Ortho.png Ortho: on imaginary lines that cross the last point, and extend at 0°, 45° and 90°
File:Snap Parallel.png Parallel: on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap
File:Snap Perpendicular.png Perpendicular: on line and arc segments, perpendicularly to the latest point

File:Snap Lock.png Lock: turns snapping on/off globally
Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
Other, more complex snap locations can also be obtained by using constraining (by pressing SHIFT or X or Y or Z while drawing).
Pressing L while drawing locks the current angle of the line segment being drawn.
The maximum distance at which a point is snapped a snap location is specified in the preferences, and can also be changed on-the-fly by pressing [ or ] keys.

Other languages: