Draft Neigung

From FreeCAD Documentation
Revision as of 21:54, 4 December 2019 by Maker (talk | contribs) (Created page with "==Beschreibung==== Für eine ausgewählte Draft Line/de oder Draft Wire/de , die auf der XY Ebene gezeichnet wurde, erhöht das Werkzeug Entwurfsneigung die Z Koordina...")

Draft Slope

Menu location
Draft → Utilities → Set Slope
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
0.17
See also
Draft Line, Draft Wire

Beschreibung==

Für eine ausgewählte Draft Line/de oder Draft Wire/de , die auf der XY Ebene gezeichnet wurde, erhöht das Werkzeug Entwurfsneigung die Z Koordinate aller Knoten nach dem ersten, so dass die Linie oder der Draht die definierte Steigung aufweist.

The equivalent action is editing the object and moving the points manually to a new position.

Horizontal line; line with slope changed to 45°

How to use

  1. Select a Draft Line or Draft Wire object.
  2. Go to the menu Draft → Utilities → File:Draft Slope.png Set Slope.
  3. Set the desired slope value, and press the OK button.

The slope value is the tangent of the elevation angle:

  • 0 means the line is completely horizontal, because tan(0°) = 0.
  • 1 means 45 degrees up, because tan(45°) = 1.
  • 0.577 means 30 degrees up, because tan(30°) = 0.577.
  • 1.732 means 60 degrees up, because tan(60°) = 1.732, etc.

Negative values are also possible:

  • -1 means 45 degrees down, because tan(-45°) = -1, etc.