Draft Slope

From FreeCAD Documentation
Revision as of 09:56, 15 June 2021 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Draft Slope

Menu location
Modification → Set slope
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
0.17
See also
None

Description

The Draft Slope command slopes selected Draft Lines or Draft Wires by increasing, or decreasing, the Z coordinate of all points after the first one. It can also be used to flatten Draft Wires.

On the left a horizontal Draft Line. On the right the same line with a slope value of 1 (angle is 45°)

Usage

  1. Select one or more Draft Lines and/or Draft Wires.
  2. There are several ways to invoke the command:
    • Press the Draft Slope button.
    • Select the Modification → Set slope option from the menu.
  3. Enter a Slope value. 0 means each segment is horizontal, 0.5 means the delta height for each segment is 0.5 times its length, etc. The value can also be negative.
  4. Press Enter or the OK button to finish the command.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

There is no Python method to slope objects. To emulate the results of the Draft Slope command the Points property of wire objects has to be modified.