Draft Slope
Draft Slope |
Menu location |
---|
Draft → Utilities → Set Slope |
Workbenches |
Draft, Arch |
Default shortcut |
None |
Introduced in version |
- |
See also |
Draft Line, Draft Wire |
Description
This tool allows to set the slope (vertical horizontal) of selected wires or lines. By setting a slope value, all vertices after the first one will have their Z value changed so the different segments of the wires or lines will have the given inclination.
The slope value is a tangential value: 0 means horizontal, 1 means 45 degrees upwards, -1 means 45 degrees downwards, 0.577 means 30 degrees up, etc.
How to use
- Select a Draft Line or Draft Wire object.
- Press the File:Draft Slope.png Set Slope button, or go to the menu Draft → Utilities → Set Slope.
- Set the desired slope value, and press the OK button.