Draft Slope

From FreeCAD Documentation
Revision as of 20:46, 22 August 2016 by Yorik (talk | contribs) (Marked this version for translation)

Draft Slope

Menu location
Draft → Utilities → Set Slope
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool allows to set the slope (vertical inclination) of selected wires or lines. By setting a slope value, all vertices after the first one will have their Z value changed so the different segments of the wires or lines will have the given inclination.

The slope value is a tangential value: 0 means horizontal, 1 means 45 degrees upwards, -1 means 45 degrees downwards, 0.577 means 30 degrees up, etc.

How to use

  1. Select one or more Wire or Line objects
  2. Select menu Draft -> Utilities -> File:Draft Slope.png Set Slope
  3. Set the desired value in the Slope task panel box
  4. Press the OK button