Draft Slope: Difference between revisions

From FreeCAD Documentation
(The command was removed from the Utilities menu in V0.20. See https://github.com/FreeCAD/FreeCAD/pull/4882.)
No edit summary
Line 36: Line 36:
# Select one or more [[Draft_Line|Draft Lines]] and/or [[Draft_Wire|Draft Wires]].
# Select one or more [[Draft_Line|Draft Lines]] and/or [[Draft_Wire|Draft Wires]].
# There are several ways to invoke the command:
# There are several ways to invoke the command:
#* Press the {{Button|[[Image:Draft_Slope.svg|16px]] [[Draft_Slope|Draft Slope]]}} button.
#* Press the {{Button|[[Image:Draft_Slope.svg|16px]] [[Draft_Slope|Draft Set slope]]}} button.
#* Select the {{MenuCommand|Modification → [[Image:Draft_Slope.svg|16px]] Set slope}} option from the menu.
#* Select the {{MenuCommand|Modification → [[Image:Draft_Slope.svg|16px]] Set slope}} option from the menu.
# Enter a {{MenuCommand|Slope}} value. {{Value|0}} means each segment is horizontal, {{Value|0.5}} means the delta height for each segment is {{Value|0.5}} times its length, etc. The value can also be negative.
# Enter a {{MenuCommand|Slope}} value. {{Value|0}} means each segment is horizontal, {{Value|0.5}} means the delta height for each segment is {{Value|0.5}} times its length, etc. The value can also be negative.
Line 44: Line 44:


<!--T:15-->
<!--T:15-->
See also: [https://freecad.github.io/SourceDoc/ Autogenerated API documentation] and [[FreeCAD Scripting Basics|FreeCAD Scripting Basics]].
See also: [https://freecad.github.io/SourceDoc/ Autogenerated API documentation] and [[FreeCAD_Scripting_Basics|FreeCAD Scripting Basics]].


<!--T:16-->
<!--T:16-->

Revision as of 20:29, 24 November 2021

Draft Slope

Menu location
Modification → Set slope
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
0.17
See also
None

Description

The Draft Slope command slopes selected Draft Lines or Draft Wires by increasing, or decreasing, the Z coordinate of all points after the first one. It can also be used to flatten Draft Wires. Note that the slope is relative to the XY plane defined by the DataPlacement of the objects.

On the left a horizontal Draft Line. On the right the same line with a slope value of 1 (angle is 45°)

Usage

  1. Select one or more Draft Lines and/or Draft Wires.
  2. There are several ways to invoke the command:
    • Press the Draft Set slope button.
    • Select the Modification → Set slope option from the menu.
  3. Enter a Slope value. 0 means each segment is horizontal, 0.5 means the delta height for each segment is 0.5 times its length, etc. The value can also be negative.
  4. Press Enter or the OK button to finish the command.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

There is no Python method to slope objects. To emulate the results of the Draft Slope command the Points property of wire objects has to be modified.