Tutorial Draft Forma da Testo

From FreeCAD Documentation
Revision as of 21:40, 15 July 2016 by Renatorivo (talk | contribs)
Tutorial
Argomento
Forma da Testo (Draft)
Livello di difficoltà
Beginner
Tempo di esecuzione
30 minuti
Autori
r-frank
Versione di FreeCAD
0.16.6704
Files di esempio
Vedere anche
Nessuno

Introduzione

In questo tutorial vedremo come

  • inserire un testo con lo strumento Forma da testo (ShapeString)
  • estruderlo per creare un solido
  • posizionarlo nello spazio 3D usando il posizionamento e Draft Sposta con degli schizzi come elementi di supporto
  • inciderlo mediante l'applicazione di un taglio booleano

Si raccomanda di aver completato prima il tutorial di Sketcher.

Creare la forma di base

  • Avviare FreeCAD e creare un nuovo documento
  • Passare all'ambiente Part
  • Inserire un cubo cliccando su
  • Assicurarsi che il cubo sia selezionato nella vista ad albero
  • Modificare la larghezza fino a 31 mm utilizzando la scheda dati nella finestra delle proprietà
  • Cliccare su per passare alla vista isometrica
  • Cliccare su File:View-zoom-all.svg per adattare la vista a tutto l'oggetto
  • Nella vista 3D selezionare il bordo superiore sulla faccia anteriore del cubo
  • Applicare uno smusso (a Edge6) di 5 mm cliccando su
  • Assicurarsi che l'oggetto "smusso" sia selezionato nella vista ad albero e premere <spazio> per commutare la visibilità

Inserire il testo con lo strumento ShapeString di Draft

  • Passare all'ambiente Draft
  • Assicurarsi che nella vista ad albero non sia selezionato nulla
  • Passare al piano di lavoro XY (dall'alto) cliccando su Auto e sceglindo XY
  • Inserire il testo "FreeCAD" in questo modo
    • Cliccare su
    • Evidenziare il testo nel campo "Global X" e digitare "0" sulla tastiera, poi premere Return
    • Viene evidenziato il testo nel campo "Global Y"
    • Digitare "0" sulla tastiera, poi premere Return
    • Viene evidenziato il testo nel campo "Global Z"
    • Digitare "0" sulla tastiera, poi premere Return
    • Digitare "FreeCAD" nel campo della stringa (senza parentesi) e premere Return
    • Scegliere una altezza di 5mm
    • Scegliere un tracking di 0 mm
    • Ora fornire a FreeCAD il percorso al Font di testo "TTF" da usare (per esempio ARIAL-TTF)
    • Dopo aver premuto Return un'ultima volta, nella struttura ad albero viene creato l'oggetto Forma da testo di Draft

Create 3D text

  • Switch to part workbench
  • Make sure the Draft Shapestring object view is selected in the tree
  • Use Part Extrude-Tool with the parameters:
    • extude Z=1 mm
    • make sure to tick "create solid"
  • Make sure object "Extrude" is selected in the tree view and press <Space> to toggle visibility

Insert sketch for positioning

  • Switch to sketcher workbench
  • Make sure object "chamfer" is selected in the tree view and press <Space> to toggle visibility
  • Choose sloped face created by chamfer operation
  • Click on to insert new sketch
  • Draw a line (may be horizintal or vertical, length is not of importance ...)
  • Constrain one of the endpoints to be +2,5 mm vertical distance and +2 mm horizontal distance away from the origin
  • Close sketch

Positioning 3D text in 3D space

  • Make sure object "Extrude" is selected in the tree view and press <Space> to toggle visibility
  • Make sure, object "Extrude" is selected in the tree view
  • Apply incremental placement, axis of rotation Z=90°
  • Apply incremental placement, axis of rotation Y=45°
  • Switch to draft workbench
  • Switch to wireframe mode
  • Make sure, only "snap to endpoint" is activated
  • Select "extrude"-object
  • Click on
  • In 3D view click on the most upper left corner point of "extrude"-object (1) and then click on the constrained point in the sketch (2)

Creating engraved text

  • Switch to part workbench
  • Switch to "As is"-view mode
  • Select the 3D text ("extrude") and then the base object ("chamfer") in the tree view
  • Apply a boolean cut by clicking on
  • Make sure object "Sketch" is selected in the tree view
  • Press <Space> to toggle visibilty
  • Click on to change to axometric view
  • Click on File:View-zoom-all.svg to zoom to fit all
  • Finished

Notes

  • for creating curved text you can use the macro Circular Text
  • for importing text from inkscape look at the "Importing text from inkscape"-tutorial
  • Extrusion of the Shapestring-Text can also be done with the PartDesign-Pad-Tool
  • Remember that the DraftShapestring-Object cannot be attached to a face (so no pocket-command possible)