Rysunek Roboczy: Prostokąt
Draft: Prostokąt |
Lokalizacja w menu |
---|
Drafting → Prostokąt |
Środowisko pracy |
Draft, Arch |
Domyślny skrót |
R E |
Wprowadzono w wersji |
0.7 |
Zobacz także |
Draft: Elipsa, Part: Box |
Description
The Rectangle tool creates a rectangle by picking two points. It uses the Draft Linestyle set on the Draft Tray.
You can optionally add a 45 degree chamfer or circular fillet to every corner of the rectangle, and you can divide the rectangle into a series of equal-sized rows and columns.
Prostokąt zdefiniowany przez dwa punkty narożne
Usage
- Press the Draft Rectangle button, or press R then E keys.
- Click a first corner point on the 3D view, or type a coordinate and press the add point button.
- Click another point on the 3D view that is opposite the first one, or type a coordinate and press the add point button.
- The second point must not be constrained to the X, Y, or Z axes, or the resulting rectangle will be malformed.
The rectangle can be edited by double clicking on the element in the tree view, or by pressing the Draft Edit button. Then you can move the points to a new position.
The length and width of the rectangle can be changed after creation by changing its properties.
Options
- To enter coordinates manually, simply enter the numbers, then press Enter between each X, Y and Z component. You can press the add point button when you have the desired values to insert the point.
- Press R or click the checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first one; if not, they are absolute, taken from the origin (0,0,0).
- Press T or click the checkbox to toggle continue mode. If continue mode is on, the Rectangle tool will restart after you give the second point, allowing you to draw another rectangle without pressing the tool button again.
- Press L or click the checkbox to toggle filled mode. If filled mode is on, the rectangle will create a filled face (DANEMake Face
true
); if not, the rectangle will not make a face (DANEMake Facefalse
). - Hold Ctrl while drawing to force snapping your point to the nearest snap location, independently of the distance.
- Press Esc or the Close button to abort the current command.
Properties
Data
- DANELength: specifies the length of the shape in the X axis direction.
- DANEHeight: specifies the height of the shape in the Y axis direction.
- DANEChamfer Size: specifies the diagonal length of the 45° chamfer at each corner of the rectangle.
- DANEFillet Radius: specifies the radius of the 90° fillet at each corner of the rectangle.
- DANERows: specifies the number of equal-sized rows in which the original shape is divided; by default, 1 row.
- DANEColumns: specifies the number of equal-sized columns in which the original shape is divided; by default, 1 column.
- DANEMake Face: specifies if the shape makes a face or not. If it is
true
a face is created, otherwise only the perimeter is considered part of the object.
View
- WIDOKPattern: specifies a Draft Pattern with which to fill the face of the shape. This property only works if DANEMake Face is
true
, and if WIDOKDisplay Mode is "Flat Lines". - WIDOKPattern Size: specifies the size of the Draft Pattern.
- WIDOKTexture Image: specifies the path to an image file to be mapped on the face of the shape. Blanking this property will remove the image.
- The rectangle should have the same proportions as the image to avoid distortions in the mapping.
Scripting
See also: Draft API and FreeCAD Scripting Basics.
The Rectangle tool can be used in macros and from the Python console by using the following function:
Rectangle = makeRectangle(length, height, placement=None, face=None, support=None)
- Creates a
Rectangle
object withlength
in the X direction andheight
in the Y direction, with units in millimeters.- The length will be parallel to the X axis if no other placement in given.
- If a
placement
is given, it is used; otherwise the shape is created at the origin. - If
face
isTrue
, the shape will make a face, that is, it will appear filled.
Example:
import FreeCAD, Draft
Rectangle1 = Draft.makeRectangle(4000, 1000)
Rectangle2 = Draft.makeRectangle(1000, 4000)
ZAxis = FreeCAD.Vector(0, 0, 1)
p3 = FreeCAD.Vector(1000, 1000, 0)
place3 = FreeCAD.Placement(p3, FreeCAD.Rotation(ZAxis, 45))
Rectangle3 = Draft.makeRectangle(3500, 250, placement=place3)
- Kreślenie: Linia, Polilinia, Zaokrąglenie, Łuk, Łuk przez 3 punkty, Okrąg, Elipsa, Wielokąt foremny, Krzywa złożona, Krzywa Bezier'a, Punkt, Łącznik ścian, Kształt z tekstu, Kreskowanie, Prostokąt
- Adnotacje: Adnotacja wieloliniowa, Wymiarowanie, Etykieta, Edytor stylów adnotacji, Widżet skali anotacji
- Modyfikacja: Przesuń, Obróć, Skala, Odbicie lustrzane, Odsunięcie, Przytnij, Rozciągnij, Klonuj, Szyk, Szyk biegunowy, Szyk kołowy, Szyk po ścieżce, Szyk powiązań po ścieżce, Szyk z punktów, Szyk powiązań w punktach, Edycja, Podświetl element podrzędny, Połącz, Rozdziel, Ulepsz kształt, Rozbij obiekt na elementy, Polilinia na krzywą złożoną, Rysunek Roboczy do szkicu, Nachylenie, Obróć wymiar, Widok 2D kształtu
- Tacka narzędziowa: Wybór płaszczyzny, Ustaw styl, Przełącz tryb konstrukcyjny, Grupowanie automatyczne
- Przyciąganie: Przełącz przyciąganie, Przyciągnij do punktu końcowego, Przyciągnij do punktu środkowego, Przyciągnij do środka, Przyciągnij do kąta, Przyciąganie do punktu przecięcia, Przyciągnij prostopadle, Rozszerz, Przyciągnij równolegle, Przyciągnij specjalnie, Przyciąganie do najbliższego, Przyciągnij ortogonalnie, Przyciągnij do siatki, Przyciągnij do płaszczyzny roboczej, Przyciągnij do wymiaru, Pokaż / ukryj siatkę
- Różności: Zastosuj bieżący styl, Warstwa, Zarządzaj warstwami, Dodaj grupę o nazwie, Dodaj do grupy, Wybierz grupę, Dodaj do grupy konstrukcyjnej, Przełącz tryb wyświetlania, Pośrednia płaszczyzna robocza, Ulecz, Przełącz tryb kontynuacji, Pokaż przybornik przyciągania
- Dodatkowe:: Wiązania, Wypełnienie wzorem, Preferencje, Ustawienia Importu i Eksportu, DXF/DWG, SVG, OCA, DAT
- Menu podręczne:
- Kontener warstwy: Połącz duplikaty warstw, Dodaj warstwę
- Warstwa: Aktywuj warstwę, Zaznacz zawartość warstwy
- Pośrednia płaszczyzna robocza: Zapisz ujęcie widoku, Zapisz stan obiektów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web