Draft Polygon/ru
|
|
| Системное название |
|---|
| Draft Polygon |
| Расположение в меню |
| Черчение -> Многоугольник |
| Верстаки |
| Draft, Arch |
| Быстрые клавиши |
| P G |
| Представлено в версии |
| - |
| См. также |
| Нет |
Description
The polygon tool creates a regular polygon by picking two points, the center and a second point defining a radius. It takes the linewidth and color previously set on the Tasks tab.
How to use
- Press the
Draft Polygon button, or press P then G keys - Click a first point on the 3D view, or type a coordinate to indicate the center
- Adjust the desired number of sides in the options dialog,
- Click another point on the 3D view, or type a radius value to define the polygon radius. The polygon will also be a face, even if it appears as wireframe.
Options
- To enter coordinates manually, simply enter the numbers, then press ENTER between each X, Y and Z component.
- Press T or click the checkbox to check/uncheck the Continue button. If continue mode is on, the Polygon tool will restart after you finish or close it, allowing you to draw another one without pressing the Polygon button again.
- Press CTRL while drawing to force snapping your point to the nearest snap location, independently of the distance.
- Press SHIFT while drawing to constrain your next point horizontally or vertically in relation to the last one.
- Press I or the Filled button to have the polygon filled with a face after it has been closed
- Press ESC or the Cancel button to abort the current command.
- Polygons, when in "Flat Lines" display mode, can display a hatch pattern, by setting their "Pattern" property below.
Properties
- ДанныеRadius: The radius of the defining circle
- ДанныеDraw Mode: Specifies if the polygon is inscribed or circumscribed around the defining circle
- ДанныеFaces Number: The number of sides of the polygon
- ДанныеChamfer Size: Specifies the size of chamfered corners
- ДанныеFillet Radius: Specifies a curvature radius to give to the corners of the rectangle
- ДанныеMake Face: Fills the polygon with a face
- ВидPattern: Specifies a hatch pattern to fill the wire with
- ВидPattern Size: Specifies the size of the hatch pattern
See also Draft Pattern page.
Scripting
The Polygon tool can by used in macros and from the python console by using the following function:
makePolygon(nfaces,[radius],[inscribed],[placement],[face])
- Creates a polygon object with the given number of faces and the radius.
- If inscribed is False, the polygon is circumscribed around a circle with the given radius, otherwise it is inscribed.
- If face is True, the resulting shape is displayed as a face, otherwise as a wireframe.
- Returns the newly created object.
Example:
import Draft
Draft.makePolygon(5,radius=3)