草稿模組

Other languages:

草稿坊能在現有文件中快速建立平面物件，且提供數種工具用時事後修改。若干工具同時用於其他 FreeCAD 物件，不僅限於草稿坊。且提供完整 snapping system, 以及數種功能來管理物件與設定。

Drawing objects

These are tools for creating objects.

Line: Draws a line segment between 2 points
Wire: Draws a line made of multiple line segments (polyline)
Circle: Draws a circle from center and radius
Arc: Draws an arc segment from center, radius, start angle and end angle
Ellipse: Draws an ellipse from two corner points
Polygon: Draws a regular polygon from center, radius, and number of sides
Rectangle: Draws a rectangle from 2 opposite points
Text: Draws a multi-line text annotation
Dimension: Draws a dimension annotation
BSpline: Draws a B-Spline from a series of points
Point: Inserts a point object
ShapeString: inserts a compound shape representing a text string at a given point
Facebinder: Creates a new object from selected faces on existing objects
Bezier Curve: Draws a Bezier curve from a series of points
Label: Places a label with an arrow pointing to a selected element introduced in version 0.17

Modifying objects

These are tools for modifying existing objects. They work on selected objects, but if no object is selected, you will be invited to select one.

Move: Moves objects from one location to another
Rotate: Rotates objects from a start angle to an end angle
Offset: offsets segments of an object a certain distance
Trim/Extend (Trimex): Trims or extends an object
Upgrade: Joins objects into a higher-level object
Downgrade: Explodes objects into lower-level objects
Scale: Scales selected objects around a base point
Edit: Edits a selected object
Wire to BSpline: Converts a wire to a BSpline and vice-versa
Add point: Adds a point to a wire or BSpline
Delete point: Deletes a point from a wire or BSpline
Shape 2D View: Creates a 2D object which is a flattened 2D view of a 3D object
Draft to Sketch: Converts a Draft object to a Sketcher Workbench Sketch and vice-versa
Array: Creates a polar or rectangular array from selected objects
Path Array: Creates an array of objects by placing the copies along a path
Point Array: Creates an array of objects by placing the copies at certain points introduced in version 0.18
Clone: Clones the selected objects
Drawing: Writes selected objects to a Drawing Workbench page
Mirror: Mirrors the selected objects
Stretch: Stretches the selected objects introduced in version 0.17

Utility tools

Additional tools available via right-click context menu, depending on the selected objects.

Set working plane: Sets a working plane from a standard view or a selected face
Finish line: Ends the drawing of the current wire or bspline, without closing it
Close line: Ends the drawing of the current wire or bspline, and closes it
Undo line: Undoes the last segment of a line
Toggle construction mode: Toggles the Draft construction mode on/off
Toggle continue mode: Toggles the Draft continue mode on/off
File:Draft ApplyStyle.png Apply style: Applies the current style and color to selected objects
Toggle display mode: Switches the display mode of selected objects between "flat lines" and "wireframe"
Add to group: Quickly adds selected objects to an existing group
Select group contents: Selects the contents of a selected group
File:Draft ToggleSnap.png Toggle snap: Toggles object snapping on/off
File:Draft ToggleGrid.png Toggle grid: Toggles the grid on/off
File:Draft ShowSnapBar.png Show snap bar: Shows/hides the snapping toolbar
Heal: Heals problematic Draft objects found in very old files
Flip Dimension: Flips the orientation of the text of a dimension
File:Draft VisGroup.png VisGroup: Creates a VisGroup in the current document
File:Draft Slope.png Slope: Changes the slope of selected Lines or Wires introduced in version 0.17
AutoGroup: Automatically place new objects in a given group introduced in version 0.17
File:Draft SetWorkingPlaneProxy.png Set Working Plane Proxy: Add a proxy object in the document to store a Working Plane position introduced in version 0.17
Add to Construction group: Add selected objects to the Construction group introduced in version 0.17

Preferences

Preferences...: Preferences available in the Draft Workbench.

檔案格式

草稿模組提供 FreeCAD 下列檔案格式匯入與匯出

Preferences... Import Export

Autodesk .DXF: Imports and exports Drawing Exchange Format files created with 2D CAD applications
SVG (as geometry): Imports and exports Scalable Vector Graphics files created with vector drawing applications
Open Cad format .OCA: Imports and exports OCA/GCAD files, a potentially new open CAD file format
Airfoil Data Format .DAT: Imports DAT files describing Airfoil profiles
Autodesk .DWG: Import and exports DWG files via the DXF importer, when the ODA Converter utility is installed.
FreeCAD and DWG Import: Import and exports DWG files
FreeCAD and DXF Import: Import and exports DXF files

Additional features

Snapping: Allows to place new points on special places on existing objects
Constraining: Allows to place new points horizontally or vertically in relation to previous points
Working with manual coordinates: Allows to enter manual coordinates instead of clicking on screen
Working plane: Allows you to define a plane in the 3D space, where next operations will take place