Atelierul Draft (Desen 2D)
Introducere
Atelierul Draft vă permite desenarea rapidă a unor obiecte bidimensionale în documentul curent şi oferă mai multe unelte pentru modificarea lor ulterioară. De asemenea, oferă instrumente pentru a defini un plan de lucru, o rețea și un sistem de ancorare pentru a controla precis poziția geometriei dvs.
Obiectele create 2D pot fi folosite pentru redactarea generală într-un mod similar cu Inkscape sau Autocad. Aceste forme 2D pot fi de asemenea utilizate ca componente de bază ale obiectelor 3D create cu alte ateliere de lucru, de exemplu, Part și Arch Workbench. Este, de asemenea, posibilă transformarea de obiecte Draft în Sketches, ceea ce înseamnă că formele pot fi de asemenea utilizate cu PartDesign Workbench pentru crearea de corpuri solide.
FreeCAD este în primul rând o aplicație de modelare 3D și, prin urmare, instrumentele sale 2D nu sunt la fel de avansate ca în cazul altor programe de desenare. Dacă obiectivul dvs. principal este producerea de desene complexe 2D și fișiere DXF și nu aveți nevoie de modelare 3D, vă recomandăm să luați în considerare un program software dedicat pentru redactarea tehnică, cum ar fi LibreCAD, QCad, TurboCad, ș.a.m.d.
Desenarea obiectelor
Aceste unelte se folosesc la crearea obiectelor.
- Linie din 2 puncte: Trasează un segment de linie definit prin 2 puncte.
- Fir/Poliline: Desenează o linie formată din mai multe segmente.
- Cerc: Trasează un cerc definit prin centru şi rază.
- Arc: Desenează un arc cu definit prin centru, rază, unghiul iniţial şi cel final.
- Ellipse: Desenează o elipsă definită prin două puncte, definind colțuri diagonale ale unei casete rectangulare în care se va încadra elipsa
- Poligon: Desenează un poligon regulat definit prin centrul, rază și numărul de laturi.
- Rectangle: Trasează un dreptunghi folosind ca repere capetele diagonalei.
- Text: Adaugă o casetă text cu mai multe linii de scriere.
- Dimensiuni: Introduce o dimensiune de cotare.
- BSpline: Trasează o curbă (B-Spline) folosind o serie de puncte.
- Punct: Inserează un punct.
- ShapeString: Instrumentul ShapeString introduce o formă compusă reprezentând un șir de text într-un punct dat în documentul curent
- Facebinder:Creează un obiect nou din fațetele selectate pe obiectele existente
- Bezier Curve: Desenează o curbă Bezier definită printr-o serie de puncte
- Label: Plasează o etichetă cu o săgeată care indică un element selectat introduced in version 0.17
Annotation objects
- Text: draws a multi-line text annotation.
- Dimension: draws a dimension annotation.
- Label: places a label with an arrow pointing to a selected element. introduced in version 0.17
- Annotation style editor: opens an editor to change the annotation style of these objects. introduced in version 0.19
Modificarea obiectelor
Aceste unelte modifică obiectele existente. Ţinta lor sunt obiectele selectate, iar dacă nu exista nici un obiect selectat veţi fi invitat să selectaţi unul.
Multe instrumente de operare (mutare, rotire, matrice etc.) lucrează și pe obiecte solide (Part, PartDesign, Arch, etc.).
- Muta: Mută obiectele dintr-o locaţie în alta.
- Rotire: Roteşte obiectele de la un unghi iniţial la un unghi final.
- Expandare: Mută segmentele unui obiect la o anumită distanţă constantă.
- Taie/Extinde (Trimex): Taie sau extinde un obiect.
- Unire: Uneşte obiectele intr-un singur obiect mai complex.
- Explodare: Sparge un obiect complex în părţi (obiecte mai simple).
- Scalare: Scalează obiectele selectate în jurul punctului de bază.
- Desenare: Transferă şi transcrie obiectele selectate pe o foaie de desen.
- Editare: Editează obiectul selectat.
- Polilinie in BSpline: Converteşte o polilinie într-o curbă (BSpline) şi viceversa.
- Adauga punct: Inserează un punct intr-o polilinie sau curbă (BSpline).
- Sterge point: Şterge un punct dintr-o polilinie sau curbă (BSpline).
- Vizualizare 2D a formei: Creează un obiect 2D care reprezintă proiecţia unui obiect 3D.
- Ciorna in schita: Converteşte un obiect 2D (Draft) în schiţă şi viceversa.
- Multimi: Creează o matrice de simetrie polară sau rectangulară multiplicând obiectele selectate.
- Path Array: Creează o serie de obiecte prin plasarea copiilor de-a lungul unei traiectorii
- Clonare: Clonează obiectele selectate.
- Mirror: Simetrizează obiectele selectate
- Stretch: Extinde obiectele selectateintroduced in version 0.17
- Clone: clones the selected objects.
- Array tools.
- OrthoArray: creates an orthogonal array from the selected object. introduced in version 0.19
- Polar Array: creates an array in a polar pattern, that is, sweeping an angle. introduced in version 0.19
- Circular Array: creates an array in a circular pattern, that is, starting from a center and moving outwards radially. introduced in version 0.19
- Path Array: creates an array of objects by placing the copies along a path.
- Path LinkArray: creates an array of App::Link elements by placing the copies along a path. introduced in version 0.19
- Point Array: creates an array of objects by placing the copies at certain points. introduced in version 0.18
- Edit: edits a selected object.
- Subelement highlight: enters an edit mode that allows editing different objects. introduced in version 0.19
- Join: joins lines together into a single wire. introduced in version 0.18
- Split: splits a wire into two at a point. introduced in version 0.18
- Upgrade: upgrades objects into a higher-level object.
- Downgrade: downgrades objects into lower-level objects.
- Wire to BSpline: converts a wire to a B-Spline and vice-versa.
- Draft to Sketch: converts a Draft object to a Sketcher Workbench Sketch and vice-versa.
- Slope: changes the elevation slope of the currently selected Draft Line or Draft Wire. introduced in version 0.17
- Flip Dimension: flips the orientation of the text of a Draft Dimension.
- Shape 2D View: creates a 2D object which is a flattened 2D view of a 3D object.
Obsolete
This command is considered obsolete because the Drawing Workbench is obsolete. However, the command itself is still available.
- Drawing: writes selected objects to a Drawing Workbench page. obsolete in version 0.17
These commands have been removed from the interface.
- Add point: adds a point to a wire or B-Spline. obsolete in version 0.19
- Delete point: deletes a point from a wire or B-Spline. obsolete in version 0.19
- Array: creates a polar or rectangular array from selected objects. obsolete in version 0.19
Draft Tray toolbar
The Draft tray toolbar appears when the workbench is started, and allows selecting the working plane, together with some visual properties like the line color, shape color, text size, line width, and automatic group.
- Set working plane: sets a working plane from a standard view or a selected face.
- Toggle construction mode: toggles the Draft construction mode on or off.
- AutoGroup: automatically place new objects in a given Std Group or Draft VisGroup. introduced in version 0.17
- Apply style: applies the current style and color to selected objects.
Draft Snap toolbar
The Draft Snap toolbar allows selecting the currently snapping mode. Its button keep depressed when a mode is active.
- File:Draft ToggleSnap.svg Toggle snap: toggles object snapping globally on or off.
- File:Snap Endpoint.svg Endpoint: snaps to the endpoints of line, arc and spline segments.
- File:Snap Midpoint.svg Midpoint: snaps to the middle point of line and arc segments.
- File:Snap Center.svg Center: snaps to the center point of arcs and circles.
- File:Snap Angle.svg Angle: snaps to the special cardinal points of circles and arcs, at 45° and 90°.
- File:Snap Intersection.svg Intersection: snaps to the intersection of two line or arc segments. Hover the mouse over the two desired objects to activate their intersection snaps.
- File:Snap Perpendicular.svg Perpendicular: on line and arc segments, snaps perpendicularly to the latest point.
- File:Snap Extension.svg Extension: snaps on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap.
- File:Snap Parallel.svg Parallel: snaps on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap.
- File:Snap Special.svg Special: snaps on special points defined by the object. introduced in version 0.17
- File:Snap Near.svg Near: snaps to the closest point or edge on the nearest object.
- File:Snap Ortho.svg Ortho: snaps on imaginary lines that cross the last point, and extend at 0°, 45° and 90°.
- File:Snap Grid.svg Grid: snaps to the intersections of the grid lines, if the grid is visible.
- File:Snap WorkingPlane.svg Working plane: always places the snapped point on the current working plane, even if you snap to a point outside that working plane.
- File:Snap Dimensions.svg Dimensions: shows temporary X and Y dimensions while snapping.
- Toggle grid: toggles the visibility of the grid on or off.
Utilitare
- Layer: creates a Layer in the current document, to which objects can be added to control object visibility and color. It replaces VisGroup. introduced in version 0.19
- VisGroup: creates a VisGroup in the current document. obsolete in version 0.19
- Working Plane Proxy: create a proxy object to store the current Working Plane position. introduced in version 0.17
- Toggle display mode: switches the display mode of selected objects between "Flat Lines" and "Wireframe".
- Add to group: quickly adds selected objects to an existing Std Group or Draft VisGroup.
- Select group contents: selects the contents of a selected Std Group or Draft VisGroup.
- Add to Construction group: add selected objects to the Construction group. introduced in version 0.17
- Heal: heals problematic Draft objects found in very old files.
O serie de instrumente suplimentare sunt oferite de un meniu Draft → Utilities, sau cu clic-dreapta în meniul contextual, în funcţie de obiectele selectate:
- Setează planului de lucru: Setează un plan de lucru din vizualizarea standard sau pe faţa selectată.
- Termină linia: Încheie desenarea poliliniei sau curbei curente Draft Wire or Draft BSpline, fără a o închide.
- Închide linia: Termină desenarea poliliniei sau curbei curente Draft Wire or Draft BSpline şi o închide.
- Undo linie: Elimină ultimul segment al poliliniei.
- Comută modul Construcţie: Comută modul Construcţie în ciornă (activ/inactiv).
- Comută modul continuu: Comută modul continuu (activ/inactiv).
- File:Draft ApplyStyle.png Aplica stil: Aplică stilul şi culoarea curente obiectelor selectate.
- Comută modul de afişare: Comută modul de afişare pentru obiectele afişate între "linii plane" şi "reţele".
- Adaugă la grup: Adaugă rapid obiectele selectate la un grup existent Std Group or Draft VisGroup.
- Selectează grupul: Selectează elementele componente ale unui grup ales.
- File:Draft ToggleSnap.png Comută ancorele: Comută ancorarea obiectelor (activă/inactivă).
- File:Draft ToggleGrid.png Comuta grila: Comută grila (activă/inactivă).
- File:Draft ShowSnapBar.png Arată bara de ancore: Afişează sau ascunde bara de ancorare.
- Heal: Rezolvă problemele din fișierele foarte vechi
- Flip Dimension: Întoarce orientarea textului dimensiunii dimension
- File:Draft VisGroup.png VisGroup: Creează un VisGroup in documentul curent
- File:Draft Slope.png Slope: Schimbă panta Liniilor sau firelor selectate introduced in version 0.17
- AutoGroup: Automat plasează noi obiecte în grupul dat introduced in version 0.17
- File:Draft SetWorkingPlaneProxy.png Set Working Plane Proxy: Adaugă un obiect proxy în documentul de salvat la Working Plane position introduced in version 0.17
- Add to Construction group: Adaugă obiectele selectate la grupul Construcții introduced in version 0.17
Obsolete
These tools were removed from the interface in v0.19 because they no longer had any purpose.
- Finish line: ends the drawing of the current Draft Wire or Draft BSpline, without closing it. obsolete in version 0.19
- Close line: ends the drawing of the current Draft Wire or Draft BSpline, and closes it. obsolete in version 0.19
- Undo line: undoes the last segment of a Draft Wire. obsolete in version 0.19
Preferințe
- Preferences: Preferințe disponibile în Atelierul Draft Workbench.
- Import-Export Preferences: preferințele disponibile pentru importul și exportul în diferite formate de fișiere.
Formate de fişiere
Atelierul Desen 2D (Draft) înzestrează FreeCAD cu importul şi exportul următoarele formate de fişiere:
- Autodesk .DXF: Importă şi exportă fişiere Drawing Exchange Format, create cu aplicaţii CAD bidimensionale (2D)., a se vedea și FreeCAD and DXF Import.
- Autodesk .DWG: imports and exports DWG files via the DXF importer, when the ODA Converter utility is installed. See also FreeCAD and DWG Import.
- SVG (geometrice): Importă şi exportă fişiere Scalable Vector Graphics, create cu programe de desenare vectorială.
- Open Cad format .OCA: Importă şi exportă fişiere OCA/GCAD, un potenţial format nou al fişierelor open CAD.
- Airfoil Data Format .DAT: Importă fişiere DAT care descriu profile Airfoil.
Install importers
- FreeCAD and DWG Import: Imports and exports DWG files
- FreeCAD and DXF Import: Imports and exports DXF files
Caracteristici suplimentare
introduceți coordonatele în loc să faceți clic pe vizualizarea 3D pentru a defini un nou punct.
limitați pointerul la mișcări orizontale sau verticale în raport cu un punct anterior.
plasați noi puncte pe locuri speciale pe obiecte existente sau pe grilă.
Unit tests
See also: Test Workbench.
To run the unit tests of the workbench execute the following from the operating system terminal.
freecad -t TestDraft
Script
Instrumentele de proiectare pot fi utilizate în macros și din consola Python utilizând API-ul de proiect.
The workbench includes a module to create samples of all objects in a new document. introduced in version 0.19
Use this to test that all objects are produced correctly.
import drafttests.draft_test_objects as dto
doc = dto.create_test_file()
Inspecting the code of this module is useful to understand how to use the programming interface.
$INSTALLDIR/Mod/Draft/drafttests/draft_test_objects.py
Where $INSTALLDIR
is the toplevel directory where the software was installed; for example, in Linux it may be /usr/share/freecad
.
Test objects for the Draft Workbench.
Îndrumătoare
- Îndrumător de folosire a Atelierului Desen 2D
- Vechiul îndrumător de folosire a AtelieruluiDesen2D
- Îndrumător modelare 3D a fonturilor cu ShapeString
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub