Draft Workbench: Difference between revisions

From FreeCAD Documentation
(Use SVG icon images instead of PNG images. Images are named matching the tool name.)
m (moved templates out of translation tags)
(28 intermediate revisions by 5 users not shown)
Line 2: Line 2:
<translate>
<translate>
<!--T:32-->
<!--T:32-->
{{Docnav
{{docnav|[[Arch Workbench|Arch Workbench]]|[[Drawing Workbench|Drawing Workbench]]|IconL=Workbench_Arch.svg|IconR=Workbench_Drawing.svg}}
|[[Arch Workbench|Arch Workbench]]
|[[Drawing Workbench|Drawing Workbench]]
|IconL=Workbench_Arch.svg
|IconR=Workbench_Drawing.svg
}}
</translate>
</translate>
[[Image:Workbench_Draft.svg|240px|center]]

[[Image:Workbench_Draft.svg|64px]]
<translate>
<translate>
<!--T:38-->
{{Caption|align=center|The FreeCAD Draft Workbench Icon}}


== Introduction == <!--T:1-->
== Introduction == <!--T:1-->
Line 15: Line 21:


<!--T:30-->
<!--T:30-->
FreeCAD is primarily a 3D modelling application, and thus its 2D tools aren't as advanced as in other drawing programs. If your primary goal is the production of complex 2D drawings and [[DXF]] files, and you don't need 3D modelling, you may wish to consider a dedicated software program for technical drafting such as [https://en.wikipedia.org/wiki/LibreCAD LibreCAD], [https://en.wikipedia.org/wiki/QCad QCad], TurboCad, and others.
FreeCAD is primarily a 3D modelling application, and thus its 2D tools aren't as advanced as in other drawing programs. If your primary goal is the production of complex 2D drawings and [[DXF|DXF]] files, and you don't need 3D modelling, you may wish to consider a dedicated software program for technical drafting such as [https://en.wikipedia.org/wiki/LibreCAD LibreCAD], [https://en.wikipedia.org/wiki/QCad QCad], TurboCad, and others.


</translate>
</translate>
{{TOCright}}
{{TOCright}}
[[Image:Draft_Workbench_Example.png|600px]]
[[Image:Draft_Workbench_Example.png|600px|Draft Workbench Example]]
<translate>
<translate>


Line 29: Line 35:
<!--T:18-->
<!--T:18-->
* [[Image:Draft_Line.svg|32px]] [[Draft_Line|Line]]: draws a line segment between two points.
* [[Image:Draft_Line.svg|32px]] [[Draft_Line|Line]]: draws a line segment between two points.
* [[Image:Draft_Wire.svg|32px]] [[Draft_Wire|Wire]]: draws a line made of multiple line segments (polyline).
* [[Image:Draft_Wire.svg|32px]] [[Draft_Wire|Polyline]]: draws a line made of multiple line segments (polyline).
* [[Image:Draft_Fillet.svg|32px]] [[Draft_Fillet|Fillet]]: draws a fillet (rounded corner) or a chamfer (straight line) between two simple [[Draft_Line|Lines]]. {{Version|0.19}}
* [[Image:Draft_Circle.svg|32px]] [[Draft_Circle|Circle]]: draws a circle from center and radius.
* [[Image:Draft_Circle.svg|32px]] [[Draft_Circle|Circle]]: draws a circle from center and radius.
* [[Image:Draft_Arc.svg|32px]] [[Draft_Arc|Arc]]: draws an arc segment from center, radius, start angle and end angle.
* [[Image:Draft_Arc.svg|32px]] [[Draft_Arc|Arc]]: draws an arc segment from center, radius, start angle and end angle.
Line 42: Line 49:
* [[Image:Draft_ShapeString.svg|32px]] [[Draft_ShapeString|ShapeString]]: inserts a compound shape representing a text string at a given point.
* [[Image:Draft_ShapeString.svg|32px]] [[Draft_ShapeString|ShapeString]]: inserts a compound shape representing a text string at a given point.
* [[Image:Draft_Facebinder.svg|32px]] [[Draft_Facebinder|Facebinder]]: creates a new object from selected faces on existing objects.
* [[Image:Draft_Facebinder.svg|32px]] [[Draft_Facebinder|Facebinder]]: creates a new object from selected faces on existing objects.
* [[Image:Draft_BezCurve.svg|32px]] [[Draft_BezCurve|Bezier Curve]]: draws a Bezier curve from a series of points.
* [[Image:Draft_CubicBezCurve.svg|32px]] [[Draft_CubicBezCurve|Cubic Bezier Curve]]: draws a Bezier curve of third degree by dragging two points. {{Version|0.19}}
* [[Image:Draft_CubicBezCurve.svg|32px]] [[Draft_CubicBezCurve|Cubic Bezier Curve]]: draws a Bezier curve of third degree by dragging two points. {{Version|0.19}}
* [[Image:Draft_BezCurve.svg|32px]] [[Draft_BezCurve|Bezier Curve]]: draws a Bezier curve from a series of points.
* [[Image:Draft_Label.svg|32px]] [[Draft_Label|Label]]: places a label with an arrow pointing to a selected element. {{Version|0.17}}
* [[Image:Draft_Label.svg|32px]] [[Draft_Label|Label]]: places a label with an arrow pointing to a selected element. {{Version|0.17}}


Line 65: Line 72:
* [[Image:Draft_Scale.svg|32px]] [[Draft_Scale|Scale]]: scales selected objects around a base point.
* [[Image:Draft_Scale.svg|32px]] [[Draft_Scale|Scale]]: scales selected objects around a base point.
* [[Image:Draft_Edit.svg|32px]] [[Draft_Edit|Edit]]: edits a selected object.
* [[Image:Draft_Edit.svg|32px]] [[Draft_Edit|Edit]]: edits a selected object.
* [[Image:Draft_Edit_Improved.svg|32px]] [[Draft_Edit_Improved|Edit Improved]]: enters an edit mode that allows editing different objects. {{Version|0.19}}
* [[Image:Draft_SubelementHighlight.svg|32px]] [[Draft_SubelementHighlight|Subelement highlight]]: enters an edit mode that allows editing different objects. {{Version|0.19}}
* [[Image:Draft_WireToBSpline.svg|32px]] [[Draft_WireToBSpline|Wire to BSpline]]: converts a wire to a B-Spline and vice-versa.
* [[Image:Draft_WireToBSpline.svg|32px]] [[Draft_WireToBSpline|Wire to BSpline]]: converts a wire to a B-Spline and vice-versa.
* [[Image:Draft_AddPoint.svg|32px]] [[Draft_AddPoint|Add point]]: adds a point to a wire or B-Spline.
* [[Image:Draft_AddPoint.svg|32px]] [[Draft_AddPoint|Add point]]: adds a point to a wire or B-Spline.
* [[Image:Draft_DelPoint.svg|32px]] [[Draft_DelPoint|Delete point]]: deletes a point from a wire or B-Spline.
* [[Image:Draft_DelPoint.svg|32px]] [[Draft_DelPoint|Delete point]]: deletes a point from a wire or B-Spline.
* [[Image:Draft_Shape2DView.svg|32px]] [[Draft_Shape2DView|Shape 2D View]]: creates a 2D object which is a flattened 2D view of a 3D object.
* [[Image:Draft_Shape2DView.svg|32px]] [[Draft_Shape2DView|Shape 2D View]]: creates a 2D object which is a flattened 2D view of a 3D object.
* [[Image:Draft_Draft2Sketch.svg|32px]] [[Draft_Draft2Sketch|Draft to Sketch]]: converts a Draft object to a [[Sketcher Workbench]] Sketch and vice-versa.
* [[Image:Draft_Draft2Sketch.svg|32px]] [[Draft_Draft2Sketch|Draft to Sketch]]: converts a Draft object to a [[Sketcher Workbench|Sketcher Workbench]] Sketch and vice-versa.
* [[Image:Draft_Array.svg|32px]] [[Draft_Array|Array]]: creates a polar or rectangular array from selected objects.
* [[Image:Draft_Array.svg|32px]] [[Draft_Array|Array]]: creates a polar or rectangular array from selected objects.
* [[Image:Draft_LinkArray.svg|32px]] [[Draft_LinkArray|LinkArray]]: creates an array of [[Std_LinkMake|App::Link]] elements. {{Version|0.19}}
* [[File:Draft_PolarArray.svg|32px]] [[Draft_PolarArray|Polar Array]]: creates an array in a polar pattern, that is, sweeping an angle. {{Version|0.19}}
* [[File:Draft_CircularArray.svg|32px]] [[Draft_CircularArray|Circular Array]]: creates an array in a circular pattern, that is, starting from a center and moving outwards radially. {{Version|0.19}}
* [[Image:Draft_PathArray.svg|32px]] [[Draft_PathArray|Path Array]]: creates an array of objects by placing the copies along a path.
* [[Image:Draft_PathArray.svg|32px]] [[Draft_PathArray|Path Array]]: creates an array of objects by placing the copies along a path.
* [[Image:Draft_PathLinkArray.svg|32px]] [[Draft_PathLinkArray|Path LinkArray]]: creates an array of [[Std_LinkMake|App::Link]] elements by placing the copies along a path. {{Version|0.19}}
* [[Image:Draft_PointArray.svg|32px]] [[Draft_PointArray|Point Array]]: creates an array of objects by placing the copies at certain points. {{version|0.18}}
* [[Image:Draft_PointArray.svg|32px]] [[Draft_PointArray|Point Array]]: creates an array of objects by placing the copies at certain points. {{version|0.18}}
* [[Image:Draft_Clone.svg|32px]] [[Draft_Clone|Clone]]: clones the selected objects.
* [[Image:Draft_Clone.svg|32px]] [[Draft_Clone|Clone]]: clones the selected objects.
* [[Image:Draft_PutOnSheet.svg|32px]] [[Draft_Drawing|Drawing]]: writes selected objects to a [[Drawing Workbench]] page.
* [[Image:Draft_PutOnSheet.svg|32px]] [[Draft_Drawing|Drawing]]: writes selected objects to a [[Drawing Workbench|Drawing Workbench]] page. {{obsolete|0.17}}
* [[Image:Draft_Mirror.svg|32px]] [[Draft_Mirror|Mirror]]: mirrors the selected objects.
* [[Image:Draft_Mirror.svg|32px]] [[Draft_Mirror|Mirror]]: mirrors the selected objects.
* [[Image:Draft_Stretch.svg|32px]] [[Draft_Stretch|Stretch]]: stretches the selected objects. {{Version|0.17}}
* [[Image:Draft_Stretch.svg|32px]] [[Draft_Stretch|Stretch]]: stretches the selected objects. {{Version|0.17}}
Line 86: Line 97:
<!--T:24-->
<!--T:24-->
* [[Image:Draft_SelectPlane.svg|32px]] [[Draft_SelectPlane|Set working plane]]: sets a working plane from a standard view or a selected face.
* [[Image:Draft_SelectPlane.svg|32px]] [[Draft_SelectPlane|Set working plane]]: sets a working plane from a standard view or a selected face.
* [[Image:Draft_FinishLine.svg|32px]] [[Draft_FinishLine|Finish line]]: ends the drawing of the current [[Draft Wire]] or [[Draft BSpline]], without closing it.
* [[Image:Draft_FinishLine.svg|32px]] [[Draft_FinishLine|Finish line]]: ends the drawing of the current [[Draft Wire|Draft Wire]] or [[Draft BSpline|Draft BSpline]], without closing it.
* [[Image:Draft_CloseLine.svg|32px]] [[Draft_CloseLine|Close line]]: ends the drawing of the current [[Draft Wire]] or [[Draft BSpline]], and closes it.
* [[Image:Draft_CloseLine.svg|32px]] [[Draft_CloseLine|Close line]]: ends the drawing of the current [[Draft Wire|Draft Wire]] or [[Draft BSpline|Draft BSpline]], and closes it.
* [[Image:Draft_UndoLine.svg|32px]] [[Draft_UndoLine|Undo line]]: undoes the last segment of a [[Draft Wire]].
* [[Image:Draft_UndoLine.svg|32px]] [[Draft_UndoLine|Undo line]]: undoes the last segment of a [[Draft Wire|Draft Wire]].
* [[Image:Draft_ToggleConstructionMode.svg|32px]] [[Draft_ToggleConstructionMode|Toggle construction mode]]: toggles the Draft construction mode on or off.
* [[Image:Draft_ToggleConstructionMode.svg|32px]] [[Draft_ToggleConstructionMode|Toggle construction mode]]: toggles the Draft construction mode on or off.
* [[Image:Draft_ToggleContinueMode.svg|32px]] [[Draft_ToggleContinueMode|Toggle continue mode]]: toggles the Draft continue mode on or off.
* [[Image:Draft_ToggleContinueMode.svg|32px]] [[Draft_ToggleContinueMode|Toggle continue mode]]: toggles the Draft continue mode on or off.
* [[Image:Draft_ApplyStyle.svg|32px]] [[Draft_Apply|Apply style]]: applies the current style and color to selected objects.
* [[Image:Draft_ApplyStyle.svg|32px]] [[Draft_Apply|Apply style]]: applies the current style and color to selected objects.
* [[Image:Draft_ToggleDisplayMode.svg|32px]] [[Draft_ToggleDisplayMode|Toggle display mode]]: switches the display mode of selected objects between "Flat Lines" and "Wireframe".
* [[Image:Draft_ToggleDisplayMode.svg|32px]] [[Draft_ToggleDisplayMode|Toggle display mode]]: switches the display mode of selected objects between "Flat Lines" and "Wireframe".
* [[Image:Draft_AddToGroup.svg|32px]] [[Draft_AddToGroup|Add to group]]: quickly adds selected objects to an existing [[Std Group]] or [[Draft VisGroup]].
* [[Image:Draft_AddToGroup.svg|32px]] [[Draft_AddToGroup|Add to group]]: quickly adds selected objects to an existing [[Std Group|Std Group]] or [[Draft VisGroup|Draft VisGroup]].
* [[Image:Draft_SelectGroup.svg|32px]] [[Draft_SelectGroup|Select group contents]]: selects the contents of a selected [[Std Group]] or [[Draft VisGroup]].
* [[Image:Draft_SelectGroup.svg|32px]] [[Draft_SelectGroup|Select group contents]]: selects the contents of a selected [[Std Group|Std Group]] or [[Draft VisGroup|Draft VisGroup]].
* [[Image:Draft_ToggleSnap.svg|32px]] [[Draft_ToggleSnap|Toggle snap]]: toggles [[Draft Snap|object snapping]] on or off.
* [[Image:Draft_ToggleSnap.svg|32px]] [[Draft_ToggleSnap|Toggle snap]]: toggles [[Draft Snap|object snapping]] on or off.
* [[Image:Draft_ToggleGrid.svg|32px]] [[Draft_ToggleGrid|Toggle grid]]: toggles the visibility of the grid on or off.
* [[Image:Draft_ToggleGrid.svg|32px]] [[Draft_ToggleGrid|Toggle grid]]: toggles the visibility of the grid on or off.
* [[Image:Draft_ShowSnapBar.svg|32px]] [[Draft_ShowSnapBar|Show snap bar]]: shows or hides the [[Draft Snap]] toolbar.
* [[Image:Draft_ShowSnapBar.svg|32px]] [[Draft_ShowSnapBar|Show snap bar]]: shows or hides the [[Draft Snap|Draft Snap]] toolbar.
* [[Image:Draft_Heal.svg|32px]] [[Draft_Heal|Heal]]: heals problematic Draft objects found in very old files.
* [[Image:Draft_Heal.svg|32px]] [[Draft_Heal|Heal]]: heals problematic Draft objects found in very old files.
* [[Image:Draft_FlipDimension.svg|32px]] [[Draft_FlipDimension|Flip Dimension]]: flips the orientation of the text of a [[Draft Dimension]].
* [[Image:Draft_FlipDimension.svg|32px]] [[Draft_FlipDimension|Flip Dimension]]: flips the orientation of the text of a [[Draft Dimension|Draft Dimension]].
* [[Image:Draft_VisGroup.svg|32px]] [[Draft_VisGroup|VisGroup]]: creates a VisGroup in the current document.
* [[Image:Draft_VisGroup.svg|32px]] [[Draft_VisGroup|VisGroup]]: creates a VisGroup in the current document. {{Obsolete|0.19}}
* [[Image:Draft_Slope.svg|32px]] [[Draft Slope|Slope]]: changes the elevation slope of the currently selected [[Draft Line]] or [[Draft Wire]]. {{Version|0.17}}
* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer|Layer]]: creates a Layer in the current document, to which objects can be added to control object visibility and color. It replaces [[Draft_VisGroup|VisGroup]]. {{Version|0.19}}
* [[Image:Draft_AutoGroup.svg|32px]] [[Draft AutoGroup|AutoGroup]]: automatically place new objects in a given [[Std Group]] or [[Draft VisGroup]]. {{Version|0.17}}
* [[Image:Draft_Slope.svg|32px]] [[Draft Slope|Slope]]: changes the elevation slope of the currently selected [[Draft Line|Draft Line]] or [[Draft Wire|Draft Wire]]. {{Version|0.17}}
* [[Image:Draft_AutoGroup.svg|32px]] [[Draft AutoGroup|AutoGroup]]: automatically place new objects in a given [[Std Group|Std Group]] or [[Draft VisGroup|Draft VisGroup]]. {{Version|0.17}}
* [[Image:Draft_SetWorkingPlaneProxy.svg|32px]] [[Draft SetWorkingPlaneProxy|Set Working Plane Proxy]]: create a proxy object to store the current [[Draft_SelectPlane|Working Plane]] position. {{Version|0.17}}
* [[Image:Draft_SetWorkingPlaneProxy.svg|32px]] [[Draft SetWorkingPlaneProxy|Set Working Plane Proxy]]: create a proxy object to store the current [[Draft_SelectPlane|Working Plane]] position. {{Version|0.17}}
* [[Image:Draft_AddConstruction.svg|32px]] [[Draft_AddConstruction|Add to Construction group]]: add selected objects to the Construction group. {{Version|0.17}}
* [[Image:Draft_AddConstruction.svg|32px]] [[Draft_AddConstruction|Add to Construction group]]: add selected objects to the Construction group. {{Version|0.17}}
Line 115: Line 127:


<!--T:4-->
<!--T:4-->
These are functions for opening, importing or exporting other file formats. Opening will open a new document with the contents of the file, while importing will append the contents of the file to the current document. Export will save the selected objects to a file. If nothing is selected, all objects will be exported. Be aware that the purpose of the Draft Module is to work with 2D objects, so those import routines focus only on 2D objects, and although DXF and OCA formats also support object definitions in 3D space (objects are not necessarily flat), they will not import volumetric objects such as meshes, 3D surfaces, etc., but rather lines, circles, texts or flat shapes. Currently supported file formats are:
The Draft module provides FreeCAD with importers and exporters for the following file formats:
The Draft module provides FreeCAD with importers and exporters for the following file formats:


Line 123: Line 136:
* [[Draft_OCA|Open Cad format .OCA]]: imports and exports OCA/GCAD files, a potentially new [http://groups.google.com/group/open_cad_format open CAD file format].
* [[Draft_OCA|Open Cad format .OCA]]: imports and exports OCA/GCAD files, a potentially new [http://groups.google.com/group/open_cad_format open CAD file format].
* [[Draft_DAT|Airfoil Data Format .DAT]]: imports DAT files describing [http://www.ae.illinois.edu/m-selig/ads/coord_database.html Airfoil profiles].
* [[Draft_DAT|Airfoil Data Format .DAT]]: imports DAT files describing [http://www.ae.illinois.edu/m-selig/ads/coord_database.html Airfoil profiles].

===Install importers=== <!--T:36-->

<!--T:37-->
* [[FreeCAD_and_DWG_Import|FreeCAD and DWG Import]]: Imports and exports DWG files
* [[FreeCAD_and_DXF_Import|FreeCAD and DXF Import]]: Imports and exports DXF files


== Additional features == <!--T:6-->
== Additional features == <!--T:6-->
Line 130: Line 149:
* [[Draft Constrain|Constraining]]: limit the pointer to horizontal or vertical movements relative to a previous point.
* [[Draft Constrain|Constraining]]: limit the pointer to horizontal or vertical movements relative to a previous point.
* [[Draft Snap|Snapping]]: place new points on special places on existing objects or on the grid.
* [[Draft Snap|Snapping]]: place new points on special places on existing objects or on the grid.
* [[Draft_Copying|Copy Mode]]: All modification tools can either modify the selected objects or create a modified copy of them. Pressing and holding {{KEY|Alt}} while the object is being modified, e.g. moved or rotated, creates a copy when the key is released.
* [[Draft ToggleConstructionMode|Construction Mode]]: Allows you to create geometries separate from the rest by simply switching them on and off.
* [[Draft SelectPlane|Working plane]]: allows you to select a surface on which to build your shapes.

== Unit tests == <!--T:39-->

<!--T:40-->
{{Emphasis|See also:}} [[Test_Workbench|Test Workbench]].

<!--T:41-->
To run the unit tests of the workbench execute the following from the operating system terminal.
</translate>
{{Code|code=
freecad -t TestDraft
}}
<translate>


== Scripting == <!--T:10-->
== Scripting == <!--T:10-->


<!--T:11-->
<!--T:11-->
The Draft tools can be used in [[macros]] and from the [[Python]] console by using the [[Draft API]].
The Draft tools can be used in [[macros|macros]] and from the [[Python|Python]] console by using the [[Draft_API|Draft API]].

<!--T:42-->
The workbench includes a module to create samples of all objects in a new document. {{Version|0.19}}

<!--T:43-->
Use this to test that all objects are produced correctly.
</translate>
{{Code|code=
import drafttests.draft_test_objects as dto
doc = dto.create_test_file()
}}
<translate>

<!--T:44-->
Inspecting the code of this module is useful to understand how to use the programming interface.
</translate>
{{Code|code=
$INSTALLDIR/Mod/Draft/drafttests/draft_test_objects.py
}}
<translate>

<!--T:45-->
Where {{incode|$INSTALLDIR}} is the toplevel directory where the software was installed; for example, in Linux it may be {{incode|/usr/share/freecad}}.


== Tutorials == <!--T:14-->
== Tutorials == <!--T:14-->
Line 142: Line 200:


<!--T:12-->
<!--T:12-->
{{Docnav
{{docnav|[[Arch Workbench|Arch Workbench]]|[[Drawing Workbench|Drawing Workbench]]|IconL=Workbench_Arch.svg|IconR=Workbench_Drawing.svg}}
|[[Arch Workbench|Arch Workbench]]

|[[Drawing Workbench|Drawing Workbench]]
<!--T:33-->
|IconL=Workbench_Arch.svg
{{Draft Tools navi}}
|IconR=Workbench_Drawing.svg

}}
<!--T:34-->
{{Userdocnavi}}

<!--T:35-->
[[Category:Workbenches]]




</translate>
</translate>
{{Draft Tools navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
[[Category:Workbenches{{#translation:}}]]

Revision as of 02:28, 21 February 2020

The FreeCAD Draft Workbench Icon

Introduction

The Draft Workbench allows you to draw simple 2D objects, and offers several tools to modify them afterwards. It also provides tools to define a working plane, a grid, and a snapping system to precisely control the position of your geometry.

The created 2D objects can be used for general drafting in a way similar to Inkscape or Autocad. These 2D shapes can also be used as the base components of 3D objects created with other workbenches, for example, the Part and Arch Workbenches. Conversion of Draft objects to Sketches is also possible, which means that the shapes can also be used with the PartDesign Workbench for the creation of solid bodies.

FreeCAD is primarily a 3D modelling application, and thus its 2D tools aren't as advanced as in other drawing programs. If your primary goal is the production of complex 2D drawings and DXF files, and you don't need 3D modelling, you may wish to consider a dedicated software program for technical drafting such as LibreCAD, QCad, TurboCad, and others.

Draft Workbench Example

Drawing objects

These are tools for creating objects.

Modifying objects

These are tools for modifying existing objects. They work on selected objects, but if no object is selected, you will be invited to select one.

Many operation tools (move, rotate, array, etc.) also work on solid objects (Part, PartDesign, Arch, etc.).

Utility tools

Additional tools available from the menu Draft → Utilities, or via the right-click context menu, depending on the selected object.

Preferences

  • Preferences: general preferences for the working plane and the drawing tools.
  • Import-Export Preferences: preferences available for importing from and exporting to different file formats.

File formats

These are functions for opening, importing or exporting other file formats. Opening will open a new document with the contents of the file, while importing will append the contents of the file to the current document. Export will save the selected objects to a file. If nothing is selected, all objects will be exported. Be aware that the purpose of the Draft Module is to work with 2D objects, so those import routines focus only on 2D objects, and although DXF and OCA formats also support object definitions in 3D space (objects are not necessarily flat), they will not import volumetric objects such as meshes, 3D surfaces, etc., but rather lines, circles, texts or flat shapes. Currently supported file formats are: The Draft module provides FreeCAD with importers and exporters for the following file formats:

Install importers

Additional features

  • Coordinates: enter coordinates instead of clicking on the 3D view to define a new point.
  • Constraining: limit the pointer to horizontal or vertical movements relative to a previous point.
  • Snapping: place new points on special places on existing objects or on the grid.
  • Copy Mode: All modification tools can either modify the selected objects or create a modified copy of them. Pressing and holding Alt while the object is being modified, e.g. moved or rotated, creates a copy when the key is released.
  • Construction Mode: Allows you to create geometries separate from the rest by simply switching them on and off.
  • Working plane: allows you to select a surface on which to build your shapes.

Unit tests

See also: Test Workbench.

To run the unit tests of the workbench execute the following from the operating system terminal.

freecad -t TestDraft

Scripting

The Draft tools can be used in macros and from the Python console by using the Draft API.

The workbench includes a module to create samples of all objects in a new document. introduced in version 0.19

Use this to test that all objects are produced correctly.

import drafttests.draft_test_objects as dto
doc = dto.create_test_file()

Inspecting the code of this module is useful to understand how to use the programming interface.

$INSTALLDIR/Mod/Draft/drafttests/draft_test_objects.py

Where $INSTALLDIR is the toplevel directory where the software was installed; for example, in Linux it may be /usr/share/freecad.

Tutorials