Draft Line

From FreeCAD Documentation
Revision as of 10:09, 5 May 2018 by Mario52 (talk | contribs)
Jump to navigation Jump to search

Draft Line.svg Draft Line

Lokalizacja w menu
Draft → Line
Środowisko pracy
Draft, Arch
Domyślny skrót
Wprowadzono w wersji
Zobacz także
Draft Wire


The Line tool creates a straight, two-points line in the current work plane. It takes the linewidth and color previously set on the Tasks tab. The Line tool behaves exactly like the Draft Wire tool, except that it stops after two points.

Draft Line example.jpg

How to use

  1. Press the Draft Line.png Draft Line button, or press L then I keys
  2. Click a first point on the 3D view, or type a coordinate
  3. Click a second point on the 3D view, or type a coordinate


  • Press X, Y or Z after the first point to constrain the second point on the given axis.
  • To enter coordinates manually, simply enter the numbers, then press ENTER between each X, Y and Z component.
  • Press R or click the checkbox to check/uncheck the Relative button. If relative mode is on, the coordinates of the second point are relative to the first one. If not, they are absolute, taken from the (0,0,0) origin point.
  • Press T or click the checkbox to check/uncheck the Continue button. If continue mode is on, the Line tool will restart after you give the second point, allowing you to draw another line segment without pressing the Line button again.
  • Press CTRL while drawing to force snapping your point to the nearest snap location, independently of the distance.
  • Press SHIFT while drawing to constrain your second point horizontally or vertically in relation to the first one.
  • Press CTRL+Z or press the Draft UndoLine.png Undo button to undo the last point.
  • Press ESC or the Cancel button to abort the current Line command.
  • If several connected Draft Lines are selected they can be transformed into a wire by pressing the Draft Upgrade Button.


  • DANEStart: Punkt początkowy
  • DANEEnd: Punkt końcowy
  • DANESubdivisions: Dzieli linię z podaną liczbą poddziałów introduced in version 0.16/pl


The Line tool can by used in macros and from the python console by using the following function:

makeLine (Vector, Vector)
  • Creates a line between the two given vectors. The current draft linewidth and color will be used.
  • Returns the newly created object.


import FreeCAD, Draft
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎svenska • ‎čeština • ‎русский • ‎中文(中国大陆)‎