Kreslení Přímka

From FreeCAD Documentation
Revision as of 17:46, 20 January 2014 by Honza32 (talk | contribs) (Created page with "{{GuiCommand|Name=Draft Line|Workbenches=Kreslení, Architektura|MenuLocation=Draft -> Line|Shortcut=L I|SeeAlso=Kreslení drát}}")
Jump to navigation Jump to search

Draft Line.svg Draft Line

Menu location
Draft -> Line
Kreslení, Architektura
Default shortcut
Introduced in version
See also
Kreslení drát


The Line tool creates a straight, two-points line in the current work plane. It takes the linewidth and color previously set on the Tasks tab. The Line tool behaves exactly like the Draft Wire tool, except that it stops after two points.

Draft Line example.jpg

How to use

  1. Press the Draft Line.png Draft Line button, or press L then I keys
  2. Click a first point on the 3D view, or type a coordinate
  3. Click a second point on the 3D view, or type a coordinate


  • Press X, Y or Z after the first point to constrain the second point on the given axis.
  • To enter coordinates manually, simply enter the numbers, then press ENTER between each X, Y and Z component.
  • Press R or click the checkbox to check/uncheck the Relative button. If relative mode is on, the coordinates of the second point are relative to the first one. If not, they are absolute, taken from the (0,0,0) origin point.
  • Press T or click the checkbox to check/uncheck the Continue button. If continue mode is on, the Line tool will restart after you give the second point, allowing you to draw another line segment without pressing the Line button again.
  • Press CTRL while drawing to force snapping your point to the nearest snap location, independently of the distance.
  • Press SHIFT while drawing to constrain your second point horizontally or vertically in relation to the first one.
  • Press CTRL+Z or press the Draft UndoLine.png Undo button to undo the last point.
  • Press ESC or the Cancel button to abort the current Line command.


  • DataStart: The start point
  • DataEnd: The end point


The Line tool can by used in macros and from the python console by using the following function:

makeLine (Vector, Vector)
  • Creates a line between the two given vectors. The current draft linewidth and color will be used.
  • Returns the newly created object.


import FreeCAD, Draft
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎svenska • ‎čeština • ‎русский • ‎中文(中国大陆)‎