Rysunek Roboczy: Elipsa
Draft: Elipsa |
Lokalizacja w menu |
---|
Drafting → Elipsa |
Środowisko pracy |
Draft, Arch |
Domyślny skrót |
E L |
Wprowadzono w wersji |
0.7 |
Zobacz także |
Draft: Okrąg, Draft: Łuk |
Description
The Ellipse tool creates an ellipse in the current work plane by entering two points, defining the corners of a rectangular box in which the ellipse will fit. It uses the Draft Linestyle set on the Draft Tray.
This tool can also be used to create elliptical arcs by specifying the start and end angles. To create circles and circular arcs use the Draft Circle and Draft Arc tools. You can also approximate an elliptical or circular arc using the Draft BSpline and Draft BezCurve tools.
Ellipse defined by the rectangle corners
Usage
- Press the Draft Ellipse button, or press E then L keys.
- Click a first point on the 3D view, or type a coordinate and press the add point button.
- Click a second point on the 3D view, or type a coordinate and press the add point button.
The ellipse can be turned into an elliptical arc after creation, by setting its first angle and last angle properties to different values.
Options
- To enter coordinates manually, simply enter the numbers, then press Enter between each X, Y and Z component. You can press the add point button when you have the desired values to insert the point.
- Press R or click the checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first one; if not, they are absolute, taken from the origin (0,0,0).
- Press T or click the checkbox to toggle continue mode. If continue mode is on, the Ellipse tool will restart after you finish the shape, allowing you to draw another one without pressing the tool button again.
- Press L or click the checkbox to toggle filled mode. If filled mode is on, the ellipse will create a filled face (DANEMake Face
true
); if not, the ellipse will not make a face (DANEMake Facefalse
). - Hold Ctrl while drawing to force snapping your point to the nearest snap location, independently of the distance.
- Hold Shift while drawing to constrain your second point horizontally or vertically in relation to the first one.
- Press Esc or the Close button to abort the current command.
Properties
An Ellipse object shares many properties with a Draft Circle, but some properties only make sense for the ellipse.
Data
- DANEFirst Angle: specifies the angle of the first point of the ellipse; normally 0°.
- DANELast Angle: specifies the angle of the last point of the ellipse; normally 0°.
- DANEMajor Radius: specifies the major radius of the ellipse.
- DANEMinor Radius: specifies the minor radius of the ellipse.
- If the both radius have the same value, the ellipse looks the same as a Draft Circle.
- DANEMake Face: specifies if the Ellipse makes a face or not. If it is
true
a face is created, otherwise only the perimeter is considered part of the object. This property only works if the shape is a full ellipse.
- For it to be a full ellipse DANEFirst Angle and DANELast Angle should have the same value; otherwise, an elliptical arc is displayed. The values 0° and 360° are considered the same.
View
- WIDOKPattern: specifies a Draft Pattern with which to fill the face of the shape. This property only works if DANEMake Face is
true
, and if WIDOKDisplay Mode is "Flat Lines". - WIDOKPattern Size: specifies the size of the Draft Pattern.
Scripting
See also: Draft API and FreeCAD Scripting Basics.
The Ellipse tool can by used in macros and from the Python console by using the following function:
Ellipse = makeEllipse(majradius, minradius, placement=None, face=True, support=None)
- Creates an
Ellipse
object with given major (majradius
) and minor (minradius
) radius in millimeters.- The bigger value will be used for the major radius (X axis) if no other placement is given.
- If a
placement
is given, it is used; otherwise the shape is created at the origin. - If
face
isTrue
, the ellipse will make a face, that is, it will appear filled.
Example:
import FreeCAD, Draft
Ellipse1 = Draft.makeEllipse(3000, 200)
Ellipse2 = Draft.makeEllipse(700, 1000)
ZAxis = FreeCAD.Vector(0, 0, 1)
p3 = FreeCAD.Vector(1000, 1000, 0)
place3 = FreeCAD.Placement(p3, FreeCAD.Rotation(ZAxis, 90))
Ellipse3 = Draft.makeEllipse(700, 1000, placement=place3)
- Kreślenie: Linia, Polilinia, Zaokrąglenie, Łuk, Łuk przez 3 punkty, Okrąg, Elipsa, Wielokąt foremny, Krzywa złożona, Krzywa Bezier'a, Punkt, Łącznik ścian, Kształt z tekstu, Kreskowanie, Prostokąt
- Adnotacje: Adnotacja wieloliniowa, Wymiarowanie, Etykieta, Edytor stylów adnotacji, Widżet skali anotacji
- Modyfikacja: Przesuń, Obróć, Skala, Odbicie lustrzane, Odsunięcie, Przytnij, Rozciągnij, Klonuj, Szyk, Szyk biegunowy, Szyk kołowy, Szyk po ścieżce, Szyk powiązań po ścieżce, Szyk z punktów, Szyk powiązań w punktach, Edycja, Podświetl element podrzędny, Połącz, Rozdziel, Ulepsz kształt, Rozbij obiekt na elementy, Polilinia na krzywą złożoną, Rysunek Roboczy do szkicu, Nachylenie, Obróć wymiar, Widok 2D kształtu
- Tacka narzędziowa: Wybór płaszczyzny, Ustaw styl, Przełącz tryb konstrukcyjny, Grupowanie automatyczne
- Przyciąganie: Przełącz przyciąganie, Przyciągnij do punktu końcowego, Przyciągnij do punktu środkowego, Przyciągnij do środka, Przyciągnij do kąta, Przyciąganie do punktu przecięcia, Przyciągnij prostopadle, Rozszerz, Przyciągnij równolegle, Przyciągnij specjalnie, Przyciąganie do najbliższego, Przyciągnij ortogonalnie, Przyciągnij do siatki, Przyciągnij do płaszczyzny roboczej, Przyciągnij do wymiaru, Pokaż / ukryj siatkę
- Różności: Zastosuj bieżący styl, Warstwa, Zarządzaj warstwami, Dodaj grupę o nazwie, Dodaj do grupy, Wybierz grupę, Dodaj do grupy konstrukcyjnej, Przełącz tryb wyświetlania, Pośrednia płaszczyzna robocza, Ulecz, Przełącz tryb kontynuacji, Pokaż przybornik przyciągania
- Dodatkowe:: Wiązania, Wypełnienie wzorem, Preferencje, Ustawienia Importu i Eksportu, DXF/DWG, SVG, OCA, DAT
- Menu podręczne:
- Kontener warstwy: Połącz duplikaty warstw, Dodaj warstwę
- Warstwa: Aktywuj warstwę, Zaznacz zawartość warstwy
- Pośrednia płaszczyzna robocza: Zapisz ujęcie widoku, Zapisz stan obiektów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web