Taslak Düzenle

Other languages:

PointLinkArray

SubelementHighlight

Draft

Menü konumu
Düzenle
Taslak → Düzenle
Tezgahlar
Taslak, Yapı
Varsayılan kısayol
D E
Versiyonda tanıtıldı
-
Ayrıca bkz
Std Edit

Tanım

Düzenleme aracı, seçili nesnenin Tel köşeleri, Dikdörtgen uzunluğu ve genişliği veya Çember yarıçapı gibi belirli özelliklerini grafiksel olarak düzenlemenizi sağlar.

4 objects in Draft Edit mode: a Draft Wire (red), a Draft Arc (black), a Draft BSpline (green) and a Draft BezCurve (magenta)

Usage

See also: Draft Snap and Draft Constrain.

Optionally select one or more objects. Note that although multiple objects can be in Draft Edit mode, objects can only be edited one at a time.
There are several ways to invoke the command:
- If you have not yet selected an object: double-click an object in the Tree view. This only works for supported Draft objects.
- Press the Draft Edit button.
- Select the Modification → Edit option from the menu.
- Use the keyboard shortcut: D then E.
If you have not yet selected an object: select an object in the 3D view.
The selected objects are marked with temporary nodes, and the Main task panel opens. See Options for more information.
Optionally use a node or edge context menu. These context menus are only available for some Draft objects. See Supported objects for more information.
- Do one of the following:
  - On all operating systems: hold down E and click the node or edge. To use E you may have to click in the 3D view once to ensure that it has the focus.
  - On Windows: hold down Alt and click the node or edge.
  - On Linux: hold down Shift+Alt, Ctrl+Alt or Alt, and click the node or edge.
  - On macOS: hold down Option and click the node or edge.
- Select an option from the context menu.
- If the selected option requires point input:
  - The Node task panel opens. See Options for more information.
  - Pick a point in the 3D view, or type coordinates and press the Enter point button.
Optionally move a node:
- Click the node in the 3D view.
- The Node task panel opens. See Options for more information.
- Pick a point in the 3D view, or type coordinates and press the Enter point button.
- The result depends on the object and the selected node.
Press Esc or the Close button (the button at the top of the task panel, without the image) to finish the command.

Seçenekler

The single character keyboard shortcuts mentioned here can be changed. See Draft Preferences.

Main task panel

Press O or the Close button to finish the command. If a single Draft Wire, Draft BSpline, Draft CubicBezCurve or Draft BezCurve has been selected the object is closed.
Press Esc or the Close button to finish the command.

Node task panel

Verilen eksendeki bir sonraki noktayı sınırlamak için bir noktadan sonra X, Y veya Z tuşlarına basın.
Koordinatları manuel olarak girmek için sayıları girin, ardından her bir X, Y ve Z bileşeni arasında Enter tuşuna basın. Noktayı yerleştirmek istediğiniz değerleri aldığınızda Nokta ekle düğmesine basabilirsiniz.
snapping noktanızı mesafeden bağımsız olarak, en yakın çeki konumuna yönlendirmek için çizim yaparken Ctrl tuşunu basılı tutun.
Bir sonraki noktanızı yatay veya dikey olarak son noktaya göre constrain çizerken Shift tuşunu basılı tutun.
Düzenlemeyi bitirmek için Esc veya Kapat düğmesine veya Düzenle düğmesine basınız. .

Supported objects

Draft Line and Draft Wire

If the start or end node of an open wire is moved so that they coincide, the wire is closed.
Node context menu: delete point. At least two points must remain.
Edge context menu: add point, reverse wire (introduced in version 0.20).

Draft Arc and Draft Arc 3Points

Center node context menu: move arc.
Start node context menu: set first angle.
End node context menu: set last angle.
Mid node context menu: set radius.
Edge context menu: invert arc.

Draft Circle

No context menus for this object.

Draft Ellipse

No context menus for this object.

Draft Rectangle

No context menus for this object.

Draft Polygon

No context menus for this object.

Draft BSpline

If the start or end node of an open spline is moved so that they coincide, the spline is closed.
Node context menu: delete point. At least two points must remain for an open spline. For a closed spline the minimum number of points is three.
Edge context menu: add point.

Draft CubicBezCurve and Draft BezCurve

If the start or end node of an open curve is moved so that they coincide, the curve is closed.
Node context menu: make sharp, make tangent, make symmetric and delete point.
Edge context menu: add point.

Draft Dimension

Angular dimensions cannot be edited.
The start and end nodes of parametric dimensions cannot be moved.
No context menus for this object.

Arch Wall

A single node to control the height of the wall is displayed above the VeriPlacement of the wall.
No context menus for this object.

Arch Structure

No context menus for this object.

Arch Window

No context menus for this object.

Arch Space

No context menus for this object.

Arch Panel Cut

No context menus for this object.

Arch Panel Sheet

No context menus for this object.

Part Box

No context menus for this object.

Part Cylinder

No context menus for this object.

Part Sphere

No context menus for this object.

Part Cone

No context menus for this object.

Part Line

No context menus for this object.

Sketcher Sketch

Only sketches that contain a single unconstrained line can be edited.
No context menus for this object.

Preferences

See also: Preferences Editor and Draft Preferences.

The color of the temporary nodes is the same as the color of the snap symbols. This color can be changed in the preferences: Edit → Preferences... → Draft → Visual settings → Visual Settings → Color. Note that this color is not used for the temporary nodes displayed for Draft BezCurves. These nodes use the GörünümLine Color of the curve instead.