Draft: Draft in Sketch

From FreeCAD Documentation
Revision as of 11:28, 16 February 2014 by Renatorivo (talk | contribs) (Created page with "{{GuiCommand/it|Name=Draft_Draft2Sketch|Name/it=Da Draft a Sketcher|Workbenches=Draft, Architettura|MenuLocation=Draft → Da Draft a Sk...")

Da Draft a Sketcher

Posizione nel menu
Draft → Da Draft a Sketcher
Ambiente
Draft, Architettura
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Description

This tool converts Draft objects to Sketcher objects, and vice-versa.

How to use

  1. Select a Draft object or a Sketch
  2. Press the Draft Draft2Sketch button

Options

  • If you convert a Draft Wire, point constraints will be applied to the nodes
  • If you convert a Draft Rectangle, point constraints will be applied to the corners, and horizontal and vertical constraints to the edges
  • Non-Draft objects that are totally planar will also get converted to sketches

The sketcher does support straight lines and circular arcs. The conversion of any element that can not be reprsented with those will fail.

The conversion of any element that can not be represented with either a straight line or circular curve will just fail, i.e. the item will not appear in the sketch.

Scripting

Not available, see the Sketcher Module documentation for how to create sketches by scripting