Draft Draft2Sketch: Difference between revisions

From FreeCAD Documentation
(précision sur l'outil esquisse)
m (minor)
Line 5: Line 5:
This tool converts [[Draft Module|Draft objects]] to [[Sketcher Module|Sketcher objects]], and vice-versa.
This tool converts [[Draft Module|Draft objects]] to [[Sketcher Module|Sketcher objects]], and vice-versa.


[[Image:Draft Draft2Sketch example.jpg|400px]]
[[Image:Draft Draft2Sketch example.jpg||480px]]


==How to use==
==How to use==

Revision as of 13:17, 4 May 2013

Draft_Draft2Sketch

Menu location
Drafting -> Draft to Sketch
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool converts Draft objects to Sketcher objects, and vice-versa.

How to use

  1. Select a Draft object or a Sketch
  2. Press the Draft Draft2Sketch button

Options

  • If you convert a Draft Wire, point constraints will be applied to the nodes
  • If you convert a Draft Rectangle, point constraints will be applied to the corners, and horizontal and vertical constraints to the edges
  • Non-Draft objects that are totally planar will also get converted to sketches

The sketcher does support straight lines and circular arcs. The conversion of any element that can not be reprsented with those will fail.

The conversion of any element that can not be represented with either a straight line or circular curve will just fail, i.e. the item will not appear in the sketch.

Scripting

Not available, see the Sketcher Module documentation for how to create sketches by scripting

Available translations of this page: