Difference between revisions of "Draft Draft2Sketch"

From FreeCAD Documentation
Jump to navigation Jump to search
m (→‎Limitations: Redaction)
(Sketches, not "objects")
Line 10: Line 10:
==Description== <!--T:2-->
==Description== <!--T:2-->
This tool converts [[Draft Module|Draft objects]] to [[Sketcher Module|Sketcher objects]], and vice-versa.
This tool converts [[Draft Module|Draft objects]] to [[Sketcher Module|Sketcher Sketches]], and vice-versa.

Revision as of 23:44, 14 November 2018

Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎română • ‎svenska • ‎čeština • ‎русский

Draft Draft2Sketch.svg Draft Draft2Sketch

Menu location
Drafting → Draft to Sketch
Draft, Arch
Default shortcut
Introduced in version
See also
Sketcher Workbench, PartDesign Workbench


This tool converts Draft objects to Sketcher Sketches, and vice-versa.

Draft Draft2Sketch example.jpg

How to use

  1. Select a Draft object or a Sketch.
  2. Press the Draft Draft2Sketch.svg Draft Draft2Sketch button.


  • If you convert a Draft Wire, the resulting sketch will use point constraints for the nodes.
  • If you convert a Draft Rectangle, the resulting sketch will use point constraints for the corners, and horizontal and vertical constraints for the edges.
  • If you convert a Draft BezCurve, the resulting sketch will be approximated by a Sketcher BSpline, as the Sketcher Workbench doesn't support Bezier curves currently.
  • Non-Draft objects that are totally planar will also get converted to sketches.


The conversion of an object that cannot be represented with a combination of straight lines, circular arcs, and B-Splines will usually fail, that is, the item will not appear in the sketch.

In the past, a Draft BSpline couldn't be converted directly to a sketch. A special tool was required, such as a function in the the KicadStepUp Workbench, which can approximate B-Splines to a series of Draft Arcs. See the forum thread BSplines to Shape2DView and Sketcher.

Since FreeCAD 0.17, the conversion from Draft BSpline to Sketcher BSpline is possible. However, converting to a series of arcs is still useful in order to export the curved shape to a particular application that doesn't support B-Splines, like KiCad.


There are no options for this tool. Either it works with the selected object or not.


See also: Draft API and FreeCAD Scripting Basics.

There is no programming interface available for the Draft2Sketch tool. See the Sketcher Workbench documentation for the Sketcher API.