Draft Aimantation Dimensions

From FreeCAD Documentation
Revision as of 09:39, 10 May 2018 by Mario52 (talk | contribs)

Draft Dimensions

Emplacement du menu
Draft → Snap → Dimensions
Ateliers
Draft, Arch
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

Vous permet d'aligner sur l'une des trois lignes composant Draft dimension


Use

  1. Make sure snap mode is turned on
  2. Choose element (for example draft line) to be inserted into the FreeCAD-document
  3. Move cursor near draft dimension of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected line of the draft dimension of the target element


Notes