Draft Snap Dimensions/fr: Difference between revisions

Revision as of 09:39, 10 May 2018

Vous permet d'aligner sur l'une des trois lignes composant Draft dimension

Make sure snap mode is turned on
Choose element (for example draft line) to be inserted into the FreeCAD-document
Move cursor near draft dimension of the element you wish to attach your element to
below on the right side of the cursor the symbol of the snap mode will appear
click to attach your element to the selected line of the draft dimension of the target element

Other languages:

Revision as of 09:38, 10 May 2018 (view source) Mario52 (talk \| contribs) mNo edit summary ← Older edit		Revision as of 09:39, 10 May 2018 (view source) Mario52 (talk \| contribs) mNo edit summary Newer edit →
Line 3:		Line 3:

	===Description===		===Description===
	Vous permet d'aligner sur l'une des trois lignes composant la dimension ~~de brouillon~~		Vous permet d'aligner sur l'une des trois lignes composant Draft dimension