Draft Coordinates

From FreeCAD Documentation
Revision as of 21:32, 25 April 2009 by Yorik (talk | contribs)
Jump to navigation Jump to search

In all Draft tools, when you are asked for 3d point locations, distances, radiuses, angles or any other numeric data, you can always choose to enter those values graphically, by picking on the screen with your mouse, or directly by entering numbers with the keyboard. The first method is usually more intuitive, but when you work with absolute precision, you often need to enter a precise number and be sure the coordinate you entered is exact. Therefore, the command bar of the Draft module can always accept number input:

Draft Coordinates.jpg

The Draft command bar is an "intelligent" toolbar, which means its contents change according to the tool being used and the input required from the user. When you draw a circle, for example, the command bar will successively ask you for the circle center, then the radius. Those two values can both be indicated by picking a point on the screen or by entering numbers.

Everytime you see a number input field appearing on the command bar, you can enter numbers. You will see that those numbers also reflect the movements of your mouse cursor.

The following shortcuts can also be used:

  • SPACE BAR to swap between absolute and relative coordinates
  • C to swap between original mode and copy mode