Dialog creation

From FreeCAD Documentation
Revision as of 20:43, 5 November 2014 by Renatorivo (talk | contribs) (Created page with "En algunos sistemas el programa se llama pyuic4 en lugar de pyuic. Esta operación simplemente convertirá el archivo .ui en un archivo de guión de Python. Si abrimos el arch...")

En esta página vamos a mostrar cómo crear un simple letrero de diálogo con Qt Designer, la herramienta oficial de Qt para el diseño de interfaces, después lo convertiremos en código de Python, para luego utilizarlo en FreeCAD. Vamos a suponer en el ejemplo que ya sabes cómo editar y ejecutar archivos de guión de Python, y que puedes hacer cosas simples en una ventana de terminal, como navegar, etc. También debes tener, por supuesto, PyQt instalado.

En las aplicaciones de CAD, el diseño de una buena interfaz de usuario (UI, User Interface) es muy importante. Casi todo lo que el usuario haga será a través de alguna parte de la interfaz: leyendo los letreros de diálogo, pulsando los botones, eligiendo entre iconos, etc. Así que es muy importante pensar cuidadosamente lo que quieres hacer, cómo deseas que el usuario se comporte, y cómo será el flujo de trabajo de tu acción.

Hay un par de conceptos que debes saber a la hora de diseñar la interfaz:

  • Letreros de diálogo Modales/no modales: Un letrero de diálogo modal aparece delante de la pantalla, deteniendo la acción de la ventana principal, obligando al usuario a responder al cuadro de diálogo, mientras que un cuadro de diálogo no modal permite seguir trabajando en la ventana principal. En algunos casos la primera opción es mejor, pero en otros casos no.
  • Identificación de lo que es necesario y lo que es opcional: Asegúrate de que el usuario sabe lo que debe hacer. Etiqueta todo con la descripción adecuada, utiliza etiquetas de información sobre el uso de las herramientas, etc.
  • Separar los comandos de los parámetros: Esto se hace generalmente con botones y cuadros de texto. El usuario sabe que al hacer clic en un botón, se produce una acción mientras que al cambiar un valor dentro de un cuadro de texto va a cambiar un parámetro en alguna parte. Hoy en día, sin embargo, los usuarios suelen conocer bien lo que es un botón, lo que es un cuadro de texto, etc. El conjunto de herramientas de interfaz que está utilizando, Qt, es el conjunto de herramientas más avanzado, y no tendrás que preocuparte mucho de hacer las cosas claras, puesto que ya va a ser muy clara por sí misma.

Así que, ahora que tenemos bien definido lo que haremos, es el momento para abrir el diseñador de Qt Designer. Diseñemos un letrero de diálogo muy sencillo, como este:

Después podremos utilizar este letrero de diálogo en FreeCAD para producir un bonito plano rectangular. Puede que no veas muy útil hacer planos rectangulares, pero será fácil cambiarlo más adelante para hacer cosas más complejas. Cuando lo abras, el aspecto de Qt Designer es el siguiente:

Es muy sencillo de utilizar. En la barra de la izquierda tienes elementos que pueden ser arrastrados a tu widget. En el lado derecho tienes los paneles de propiedades mostrando todo tipo de propiedades editables de los elementos seleccionados. Comencemos ahora con la creación de un nuevo widget o complemento. Selecciona "letrero de diálogo sin botones", ya que no queremos el formato predeterminado de botones Ok/Cancelar. A continuación, arrastra sobre tu widget 3 etiquetas, una para el título, una para escribir "Altura" y otra para escribir "Ancho". Las etiquetas son textos sencillos que aparecen en tu widget, simplemente para informar al usuario. Si seleccionas una etiqueta, en la parte derecha aparecerán varias propiedades que puedes cambiar si lo deseas, como el estilo de fuente, altura, etc.

A continuación, agrega 2 LineEdits, que son cuadros de texto que el usuario puede rellenar, uno para la altura y uno para el ancho. También en este caso, podemos editar las propiedades. Por ejemplo, ¿por qué no establecer un valor predeterminado? digamos 1.00 para cada uno. De esta manera, cuando el usuario vea el letrero de diálogo, ambos campos ya estarán rellenados, y si está conforme puede pulsar el botón directamente, ahorrando un tiempo precioso. A continuación, agrega un PushButton, que es el botón que el usuario deberá pulsar después de llenar los 2 campos.

Ten en cuenta que he elegido aquí controles muy sencillos, pero Qt tiene muchas más opciones, por ejemplo, podría utilizar Spinboxes en lugar de LineEdits, etc. Echa un vistazo a lo que está disponible, seguramente tendrás otras ideas.

Eso es prácticamente todo lo que necesitamos hacer en Qt Designer. Una última cosa, sin embargo, vamos a cambiar el nombre de todos nuestros elementos con nombres más adecuados, de modo que sea más fácil identificarlos en nuestros archivos de guión:

Convertir nuestro diálogo a Python

Ahora, vamos a salvar nuestro widget en alguna parte. Se guardará como un archivo .ui, que fácilmente se convertirá en un archivo de guión de Python por medio de pyuic. En Windows, el programa pyuic se ve enriquecido con PyQt (por verificar), en linux es probable que tengas que instalarlo por separado desde tu gestor de paquetes (en sistemas basados en Debian, es parte del paquete de herramientas PyQt4-dev-tools). Para realizar la conversión, tendrás que abrir una ventana de terminal (o una ventana de símbolo de sistema en Windows), ve a donde guardaste el archivo .ui, y escribe:

pyuic mywidget.ui > mywidget.py

En algunos sistemas el programa se llama pyuic4 en lugar de pyuic. Esta operación simplemente convertirá el archivo .ui en un archivo de guión de Python. Si abrimos el archivo mywidget.py, su contenido es muy fácil de entender:

from PyQt4 import QtCore, QtGui

class Ui_Dialog(object):
    def setupUi(self, Dialog):
        Dialog.setObjectName("Dialog")
        Dialog.resize(187, 178)
        self.title = QtGui.QLabel(Dialog)
        self.title.setGeometry(QtCore.QRect(10, 10, 271, 16))
        self.title.setObjectName("title")
        self.label_width = QtGui.QLabel(Dialog)
        ...

        self.retranslateUi(Dialog)
        QtCore.QMetaObject.connectSlotsByName(Dialog)

   def retranslateUi(self, Dialog):
        Dialog.setWindowTitle(QtGui.QApplication.translate("Dialog", "Dialog", None, QtGui.QApplication.UnicodeUTF8))
        self.title.setText(QtGui.QApplication.translate("Dialog", "Plane-O-Matic", None, QtGui.QApplication.UnicodeUTF8))
        ...

As you see it has a very simple structure: a class named Ui_Dialog is created, that stores the interface elements of our widget. That class has two methods, one for setting up the widget, and one for translating its contents, that is part of the general Qt mechanism for translating interface elements. The setup method simply creates, one by one, the widgets as we defined them in Qt Designer, and sets their options as we decided earlier. Then, the whole interface gets translated, and finally, the slots get connected (we'll talk about that later).

We can now create a new widget, and use this class to create its interface. We can already see our widget in action, by putting our mywidget.py file in a place where FreeCAD will find it (in the FreeCAD bin directory, or in any of the Mod subdirectories), and, in the FreeCAD python interpreter, issue:

from PyQt4 import QtGui
import mywidget
d = QtGui.QWidget()
d.ui = mywidget.Ui_Dialog()
d.ui.setupUi(d)
d.show()

And our dialog will appear! Note that our python interpreter is still working, we have a non-modal dialog. So, to close it, we can (apart from clicking its close icon, of course) issue:

d.hide()

Making our dialog do something

Now that we can show and hide our dialog, we just need to add one last part: To make it do something! If you play a bit with Qt designer, you'll quickly discover a whole section called "signals and slots". Basically, it works like this: elements on your widgets (in Qt terminology, those elements are themselves widgets) can send signals. Those signals differ according to the widget type. For example, a button can send a signal when it is pressed and when it is released. Those signals can be connected to slots, which can be special functionality of other widgets (for example a dialog has a "close" slot to which you can connect the signal from a close button), or can be custom functions. The PyQt Reference Documentation lists all the qt widgets, what they can do, what signals they can send, etc...

What we will do here, is to create a new function that will create a plane based on height and width, and to connect that function to the pressed signal emitted by our "Create!" button. So, let's begin with importing our FreeCAD modules, by putting the following line at the top of the script, where we already import QtCore and QtGui:

import FreeCAD, Part

Then, let's add a new function to our Ui_Dialog class:

def createPlane(self):
    try:
        # first we check if valid numbers have been entered
        w = float(self.width.text())
        h = float(self.height.text())
    except ValueError:
        print "Error! Width and Height values must be valid numbers!"
    else:
        # create a face from 4 points
        p1 = FreeCAD.Vector(0,0,0)
        p2 = FreeCAD.Vector(w,0,0)
        p3 = FreeCAD.Vector(w,h,0)
        p4 = FreeCAD.Vector(0,h,0)
        pointslist = [p1,p2,p3,p4,p1]
        mywire = Part.makePolygon(pointslist)
        myface = Part.Face(mywire)
        Part.show(myface)
        self.hide()

Then, we need to inform Qt to connect the button to the function, by placing the following line just before QtCore.QMetaObject.connectSlotsByName(Dialog):

QtCore.QObject.connect(self.create,QtCore.SIGNAL("pressed()"),self.createPlane)

This, as you see, connects the pressed() signal of our create object (the "Create!" button), to a slot named createPlane, which we just defined. That's it! Now, as a final touch, we can add a little function to create the dialog, it will be easier to call. Outside the Ui_Dialog class, let's add this code:

class plane():
   def __init__(self):
       self.d = QtGui.QWidget()
       self.ui = Ui_Dialog()
       self.ui.setupUi(self.d)
       self.d.show()

(Python reminder: the __init__ method of a class is automatically executed whenever a new object is created!) Then, from FreeCAD, we only need to do:

import mywidget
myDialog = mywidget.plane()

That's all Folks... Now you can try all kinds of things, like for example inserting your widget in the FreeCAD interface (see the Code snippets page), or making much more advanced custom tools, by using other elements on your widget.

The complete script

This is the complete script, for reference:

# -*- coding: utf-8 -*-

# Form implementation generated from reading ui file 'mywidget.ui'
#
# Created: Mon Jun  1 19:09:10 2009
#      by: PyQt4 UI code generator 4.4.4
#
# WARNING! All changes made in this file will be lost!

from PyQt4 import QtCore, QtGui
import FreeCAD, Part 

class Ui_Dialog(object):
   def setupUi(self, Dialog):
       Dialog.setObjectName("Dialog")
       Dialog.resize(187, 178)
       self.title = QtGui.QLabel(Dialog)
       self.title.setGeometry(QtCore.QRect(10, 10, 271, 16))
       self.title.setObjectName("title")
       self.label_width = QtGui.QLabel(Dialog)
       self.label_width.setGeometry(QtCore.QRect(10, 50, 57, 16))
       self.label_width.setObjectName("label_width")
       self.label_height = QtGui.QLabel(Dialog)
       self.label_height.setGeometry(QtCore.QRect(10, 90, 57, 16))
       self.label_height.setObjectName("label_height")
       self.width = QtGui.QLineEdit(Dialog)
       self.width.setGeometry(QtCore.QRect(60, 40, 111, 26))
       self.width.setObjectName("width")
       self.height = QtGui.QLineEdit(Dialog)
       self.height.setGeometry(QtCore.QRect(60, 80, 111, 26))
       self.height.setObjectName("height")
       self.create = QtGui.QPushButton(Dialog)
       self.create.setGeometry(QtCore.QRect(50, 140, 83, 26))
       self.create.setObjectName("create")

       self.retranslateUi(Dialog)
       QtCore.QObject.connect(self.create,QtCore.SIGNAL("pressed()"),self.createPlane)
       QtCore.QMetaObject.connectSlotsByName(Dialog)

   def retranslateUi(self, Dialog):
       Dialog.setWindowTitle(QtGui.QApplication.translate("Dialog", "Dialog", None, QtGui.QApplication.UnicodeUTF8))
       self.title.setText(QtGui.QApplication.translate("Dialog", "Plane-O-Matic", None, QtGui.QApplication.UnicodeUTF8))
       self.label_width.setText(QtGui.QApplication.translate("Dialog", "Width", None, QtGui.QApplication.UnicodeUTF8))
       self.label_height.setText(QtGui.QApplication.translate("Dialog", "Height", None, QtGui.QApplication.UnicodeUTF8))
       self.create.setText(QtGui.QApplication.translate("Dialog", "Create!", None, QtGui.QApplication.UnicodeUTF8))

   def createPlane(self):
       try:
           # first we check if valid numbers have been entered
           w = float(self.width.text())
           h = float(self.height.text())
       except ValueError:
           print "Error! Width and Height values must be valid numbers!"
       else:
           # create a face from 4 points
           p1 = FreeCAD.Vector(0,0,0)
           p2 = FreeCAD.Vector(w,0,0)
           p3 = FreeCAD.Vector(w,h,0)
           p4 = FreeCAD.Vector(0,h,0)
           pointslist = [p1,p2,p3,p4,p1]
           mywire = Part.makePolygon(pointslist)
           myface = Part.Face(mywire)
           Part.show(myface)

class plane():
   def __init__(self):
       self.d = QtGui.QWidget()
       self.ui = Ui_Dialog()
       self.ui.setupUi(self.d)
       self.d.show()

Creation of a dialog with buttons

Method 1

An example of a dialog box complete with its connections.

# -*- coding: utf-8 -*-
# Create by flachyjoe

from PyQt4 import QtCore, QtGui

try:
    _fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
    def _fromUtf8(s):
        return s

try:
    _encoding = QtGui.QApplication.UnicodeUTF8
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig)


class Ui_MainWindow(object):

     def __init__(self, MainWindow):
        self.window = MainWindow

        MainWindow.setObjectName(_fromUtf8("MainWindow"))
        MainWindow.resize(400, 300)
        self.centralWidget = QtGui.QWidget(MainWindow)
        self.centralWidget.setObjectName(_fromUtf8("centralWidget"))

        self.pushButton = QtGui.QPushButton(self.centralWidget)
        self.pushButton.setGeometry(QtCore.QRect(30, 170, 93, 28))
        self.pushButton.setObjectName(_fromUtf8("pushButton"))
        self.pushButton.clicked.connect(self.on_pushButton_clicked) #connection pushButton

        self.lineEdit = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit.setGeometry(QtCore.QRect(30, 40, 211, 22))
        self.lineEdit.setObjectName(_fromUtf8("lineEdit"))
        self.lineEdit.returnPressed.connect(self.on_lineEdit_clicked) #connection lineEdit

        self.checkBox = QtGui.QCheckBox(self.centralWidget)
        self.checkBox.setGeometry(QtCore.QRect(30, 90, 81, 20))
        self.checkBox.setChecked(True)
        self.checkBox.setObjectName(_fromUtf8("checkBoxON"))
        self.checkBox.clicked.connect(self.on_checkBox_clicked) #connection checkBox

        self.radioButton = QtGui.QRadioButton(self.centralWidget)
        self.radioButton.setGeometry(QtCore.QRect(30, 130, 95, 20))
        self.radioButton.setObjectName(_fromUtf8("radioButton"))
        self.radioButton.clicked.connect(self.on_radioButton_clicked) #connection radioButton

        MainWindow.setCentralWidget(self.centralWidget)

        self.menuBar = QtGui.QMenuBar(MainWindow)
        self.menuBar.setGeometry(QtCore.QRect(0, 0, 400, 26))
        self.menuBar.setObjectName(_fromUtf8("menuBar"))
        MainWindow.setMenuBar(self.menuBar)

        self.mainToolBar = QtGui.QToolBar(MainWindow)
        self.mainToolBar.setObjectName(_fromUtf8("mainToolBar"))
        MainWindow.addToolBar(QtCore.Qt.TopToolBarArea, self.mainToolBar)

        self.statusBar = QtGui.QStatusBar(MainWindow)
        self.statusBar.setObjectName(_fromUtf8("statusBar"))
        MainWindow.setStatusBar(self.statusBar)

        self.retranslateUi(MainWindow)

     def retranslateUi(self, MainWindow):
        MainWindow.setWindowTitle(_translate("MainWindow", "MainWindow", None))
        self.pushButton.setText(_translate("MainWindow", "OK", None))
        self.lineEdit.setText(_translate("MainWindow", "tyty", None))
        self.checkBox.setText(_translate("MainWindow", "CheckBox", None))
        self.radioButton.setText(_translate("MainWindow", "RadioButton", None))

     def on_checkBox_clicked(self):
        if self.checkBox.checkState()==0:
            App.Console.PrintMessage(str(self.checkBox.checkState())+"  CheckBox KO\r\n")
        else:     
            App.Console.PrintMessage(str(self.checkBox.checkState())+" CheckBox OK\r\n")
#        App.Console.PrintMessage(str(self.lineEdit.setText("tititi"))+" LineEdit\r\n") #write text to the lineEdit window !
#        str(self.lineEdit.setText("tititi")) #écrit le texte dans la fenêtre lineEdit
        App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit\r\n")

     def on_radioButton_clicked(self):
        if self.radioButton.isChecked():
             App.Console.PrintMessage(str(self.radioButton.isChecked())+" Radio OK\r\n")
        else:
             App.Console.PrintMessage(str(self.radioButton.isChecked())+"  Radio KO\r\n")

     def on_lineEdit_clicked(self):
#        if self.lineEdit.textChanged():
		    App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit Display\r\n")

     def on_pushButton_clicked(self):
        App.Console.PrintMessage("Terminé\r\n")
        self.window.hide()

MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()

Here the same window but with an icon on each button.

# -*- coding: utf-8 -*-

from PyQt4 import QtCore, QtGui

try:
    _fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
    def _fromUtf8(s):
        return s

try:
    _encoding = QtGui.QApplication.UnicodeUTF8
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig)


class Ui_MainWindow(object):

     def __init__(self, MainWindow):
        self.window = MainWindow
#        path = FreeCAD.ConfigGet("UserAppData")
        path = FreeCAD.ConfigGet("AppHomePath")

        MainWindow.setObjectName(_fromUtf8("MainWindow"))
        MainWindow.resize(400, 300)
        self.centralWidget = QtGui.QWidget(MainWindow)
        self.centralWidget.setObjectName(_fromUtf8("centralWidget"))

        self.pushButton = QtGui.QPushButton(self.centralWidget)
        self.pushButton.setGeometry(QtCore.QRect(30, 170, 93, 28))
        self.pushButton.setObjectName(_fromUtf8("pushButton"))
        self.pushButton.clicked.connect(self.on_pushButton_clicked) #connection pushButton

        self.lineEdit = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit.setGeometry(QtCore.QRect(30, 40, 211, 22))
        self.lineEdit.setObjectName(_fromUtf8("lineEdit"))
        self.lineEdit.returnPressed.connect(self.on_lineEdit_clicked) #connection lineEdit

        self.checkBox = QtGui.QCheckBox(self.centralWidget)
        self.checkBox.setGeometry(QtCore.QRect(30, 90, 100, 20))
        self.checkBox.setChecked(True)
        self.checkBox.setObjectName(_fromUtf8("checkBoxON"))
        self.checkBox.clicked.connect(self.on_checkBox_clicked) #connection checkBox

        self.radioButton = QtGui.QRadioButton(self.centralWidget)
        self.radioButton.setGeometry(QtCore.QRect(30, 130, 95, 20))
        self.radioButton.setObjectName(_fromUtf8("radioButton"))
        self.radioButton.clicked.connect(self.on_radioButton_clicked) #connection radioButton

        MainWindow.setCentralWidget(self.centralWidget)

        self.menuBar = QtGui.QMenuBar(MainWindow)
        self.menuBar.setGeometry(QtCore.QRect(0, 0, 400, 26))
        self.menuBar.setObjectName(_fromUtf8("menuBar"))
        MainWindow.setMenuBar(self.menuBar)

        self.mainToolBar = QtGui.QToolBar(MainWindow)
        self.mainToolBar.setObjectName(_fromUtf8("mainToolBar"))
        MainWindow.addToolBar(QtCore.Qt.TopToolBarArea, self.mainToolBar)

        self.statusBar = QtGui.QStatusBar(MainWindow)
        self.statusBar.setObjectName(_fromUtf8("statusBar"))
        MainWindow.setStatusBar(self.statusBar)

        self.retranslateUi(MainWindow)

        # Affiche un icône sur le bouton PushButton
        # self.image_01 = "C:\Program Files\FreeCAD0.13\icone01.png" # adapt the icon name
        self.image_01 = path+"icone01.png" # adapt the name of the icon
        icon01 = QtGui.QIcon() 
        icon01.addPixmap(QtGui.QPixmap(self.image_01),QtGui.QIcon.Normal, QtGui.QIcon.Off)
        self.pushButton.setIcon(icon01) 
        self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button

        # Affiche un icône sur le bouton RadioButton 
        # self.image_02 = "C:\Program Files\FreeCAD0.13\icone02.png" # adapt the name of the icon
        self.image_02 = path+"icone02.png" # adapter le nom de l'icône
        icon02 = QtGui.QIcon() 
        icon02.addPixmap(QtGui.QPixmap(self.image_02),QtGui.QIcon.Normal, QtGui.QIcon.Off)
        self.radioButton.setIcon(icon02) 
        # self.radioButton.setLayoutDirection(QtCore.Qt.RightToLeft) #  This command reverses the direction of the button

        # Affiche un icône sur le bouton CheckBox 
        # self.image_03 = "C:\Program Files\FreeCAD0.13\icone03.png" # the name of the icon
        self.image_03 = path+"icone03.png" # adapter le nom de l'icône
        icon03 = QtGui.QIcon() 
        icon03.addPixmap(QtGui.QPixmap(self.image_03),QtGui.QIcon.Normal, QtGui.QIcon.Off)
        self.checkBox.setIcon(icon03) 
        # self.checkBox.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button


     def retranslateUi(self, MainWindow):
        MainWindow.setWindowTitle(_translate("MainWindow", "FreeCAD", None))
        self.pushButton.setText(_translate("MainWindow", "OK", None))
        self.lineEdit.setText(_translate("MainWindow", "tyty", None))
        self.checkBox.setText(_translate("MainWindow", "CheckBox", None))
        self.radioButton.setText(_translate("MainWindow", "RadioButton", None))

     def on_checkBox_clicked(self):
        if self.checkBox.checkState()==0:
            App.Console.PrintMessage(str(self.checkBox.checkState())+"  CheckBox KO\r\n")
        else:     
            App.Console.PrintMessage(str(self.checkBox.checkState())+" CheckBox OK\r\n")
           # App.Console.PrintMessage(str(self.lineEdit.setText("tititi"))+" LineEdit\r\n") # write text to the lineEdit window !
           # str(self.lineEdit.setText("tititi")) #écrit le texte dans la fenêtre lineEdit
        App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit\r\n")

     def on_radioButton_clicked(self):
        if self.radioButton.isChecked():
             App.Console.PrintMessage(str(self.radioButton.isChecked())+" Radio OK\r\n")
        else:
             App.Console.PrintMessage(str(self.radioButton.isChecked())+"  Radio KO\r\n")

     def on_lineEdit_clicked(self):
          # if self.lineEdit.textChanged():
          App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit Display\r\n")

     def on_pushButton_clicked(self):
        App.Console.PrintMessage("Terminé\r\n")
        self.window.hide()

MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()

Here the code to display the icon on the pushButton, change the name for another button, (radioButton, checkBox) and the path to the icon.

        # Affiche un icône sur le bouton PushButton
        # self.image_01 = "C:\Program Files\FreeCAD0.13\icone01.png" # the name of the icon
        self.image_01 = path+"icone01.png" # the name of the icon
        icon01 = QtGui.QIcon() 
        icon01.addPixmap(QtGui.QPixmap(self.image_01),QtGui.QIcon.Normal, QtGui.QIcon.Off)
        self.pushButton.setIcon(icon01) 
        self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button

The command UserAppData gives the user path AppHomePath gives the installation path of FreeCAD

#        path = FreeCAD.ConfigGet("UserAppData")
        path = FreeCAD.ConfigGet("AppHomePath")

This command reverses the horizontal button, right to left.

self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button

Method 2

Another method to display a window, here by creating a file QtForm.py which contains the header program (module called with import QtForm), and a second module that contains the code window all these accessories, and your code (the calling module).

This method requires two separate files, but allows to shorten your program using the file ' ' QtForm.py ' ' import. Then distribute the two files together, they are inseparable.

The file QtForm.py

# -*- coding: utf-8 -*-
# Create by flachyjoe
from PyQt4 import QtCore, QtGui

try:
    _fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
   def _fromUtf8(s):
      return s

try:
    _encoding = QtGui.QApplication.UnicodeUTF8
    def _translate(context, text, disambig):
      return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
   def _translate(context, text, disambig):
      return QtGui.QApplication.translate(context, text, disambig)

class Form(object):
   def __init__(self, title, width, height):
      self.window = QtGui.QMainWindow()
      self.title=title
      self.window.setObjectName(_fromUtf8(title))
      self.window.setWindowTitle(_translate(self.title, self.title, None))
      self.window.resize(width, height)

   def show(self):
      self.createUI()
      self.retranslateUI()
      self.window.show()
   
   def setText(self, control, text):
      control.setText(_translate(self.title, text, None))

The appellant, file that contains the window and your code.

The file my_file.py

The connections are to do, a good exercise.

# -*- coding: utf-8 -*-
# Create by flachyjoe
from PyQt4 import QtCore, QtGui
import QtForm

class myForm(QtForm.Form):
   def createUI(self):
      self.centralWidget = QtGui.QWidget(self.window)
      self.window.setCentralWidget(self.centralWidget)
      
      self.pushButton = QtGui.QPushButton(self.centralWidget)
      self.pushButton.setGeometry(QtCore.QRect(30, 170, 93, 28))
      self.pushButton.clicked.connect(self.on_pushButton_clicked)
      
      self.lineEdit = QtGui.QLineEdit(self.centralWidget)
      self.lineEdit.setGeometry(QtCore.QRect(30, 40, 211, 22))
      
      self.checkBox = QtGui.QCheckBox(self.centralWidget)
      self.checkBox.setGeometry(QtCore.QRect(30, 90, 81, 20))
      self.checkBox.setChecked(True)
      
      self.radioButton = QtGui.QRadioButton(self.centralWidget)
      self.radioButton.setGeometry(QtCore.QRect(30, 130, 95, 20))
   
   def retranslateUI(self):
      self.setText(self.pushButton, "Fermer")
      self.setText(self.lineEdit, "essai de texte")
      self.setText(self.checkBox, "CheckBox")
      self.setText(self.radioButton, "RadioButton")
   
   def on_pushButton_clicked(self):
      self.window.hide()

myWindow=myForm("Fenêtre de test",400,300)
myWindow.show()

Some useful commands

# Here the code to display the icon on the '''pushButton''', 
# change the name to another button, ('''radioButton, checkBox''') as well as the path to the icon,

       # Displays an icon on the button PushButton
       # self.image_01 = "C:\Program Files\FreeCAD0.13\icone01.png" # he name of the icon
       self.image_01 = path+"icone01.png" # the name of the icon
       icon01 = QtGui.QIcon() 
       icon01.addPixmap(QtGui.QPixmap(self.image_01),QtGui.QIcon.Normal, QtGui.QIcon.Off)
       self.pushButton.setIcon(icon01) 
       self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button


# path = FreeCAD.ConfigGet("UserAppData") # gives the user path
  path = FreeCAD.ConfigGet("AppHomePath") # gives the installation path of FreeCAD

# This command reverses the horizontal button, right to left
self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the horizontal button

# Displays an info button
self.pushButton.setToolTip(_translate("MainWindow", "Quitter la fonction", None)) # Displays an info button

# This function gives a color button
self.pushButton.setStyleSheet("background-color: red") # This function gives a color button

# This function gives a color to the text of the button
self.pushButton.setStyleSheet("color : #ff0000") # This function gives a color to the text of the button

# combinaison des deux, bouton et texte
self.pushButton.setStyleSheet("color : #ff0000; background-color : #0000ff;" ) #  combination of the two, button, and text

# replace the icon in the main window
MainWindow.setWindowIcon(QtGui.QIcon('C:\Program Files\FreeCAD0.13\View-C3P.png'))

# connects a lineEdit on execute
self.lineEdit.returnPressed.connect(self.execute) # connects a lineEdit on "def execute" after validation on enter
# self.lineEdit.textChanged.connect(self.execute) # connects a lineEdit on "def execute" with each keystroke on the keyboard

# display text in a lineEdit
self.lineEdit.setText(str(val_X)) # Displays the value in the lineEdit (convert to string)

# extract the string contained in a lineEdit
 val_X = self.lineEdit.text() # extract the (string) string contained in lineEdit
 val_X = float(val_X0)        # converted the string to an floating
 val_X = int(val_X0)          # convert the string to an integer

# This code allows you to change the font and its attributes
       font = QtGui.QFont()
       font.setFamily("Times New Roman")
       font.setPointSize(10)
       font.setWeight(10)
       font.setBold(True) # same result with tags "<b>your text</b>" (in quotes)
       self.label_6.setFont(font)
       self.label_6.setObjectName("label_6")
       self.label_6.setStyleSheet("color : #ff0000") # This function gives a color to the text
       self.label_6.setText(_translate("MainWindow", "Select a view", None))

By using the characters with accents, where you get the error :

Several solutions are possible.

UnicodeDecodeError: 'utf8' codec can't decode bytes in position 0-2: invalid data

# conversion from a lineEdit
App.activeDocument().CopyRight.Text = str(unicode(self.lineEdit_20.text() , 'ISO-8859-1').encode('UTF-8'))
DESIGNED_BY = unicode(self.lineEdit_01.text(), 'ISO-8859-1').encode('UTF-8')

or with the procedure

def utf8(unio):
    return unicode(unio).encode('UTF8')

UnicodeEncodeError: 'ascii' codec can't encode character u'\xe9' in position 9: ordinal not in range(128)

# conversion
a = u"Nom de l'élément : "
f.write('''a.encode('iso-8859-1')'''+str(element_)+"\n")

or with the procedure

def iso8859(encoder):
    return unicode(encoder).encode('iso-8859-1')

or

iso8859(unichr(176))

or

unichr(ord(176))

or

uniteSs = "mm"+iso8859(unichr(178))
print unicode(uniteSs, 'iso8859')


Line drawing function
Licence