Difference between revisions of "Debugging/ro"

From FreeCAD Documentation
Jump to navigation Jump to search
(Created page with "Debugging")
Line 78: Line 78:
{{Docnav|Module Creation|Testing}}
{{Docnav|Module Creation|Testing}}
[[Category:Developer Documentation]]
[[Category:Developer Documentation/ro]]

Revision as of 15:18, 27 February 2016

Test First

Before you go through the pain of debugging use the Test framework to check if the standard tests work properly. If they do not run complete there is possibly a broken installation.

Command Line

The debugging of FreeCAD is supported by a few internal mechanisms. The command line version of FreeCAD provides some options for debugging support.

These are the currently recognized options in FreeCAD 0.15:

Generic options:

 -v [ --version ]      Prints version string
 -h [ --help ]         Prints help message
 -c [ --console ]      Starts in console mode
 --response-file arg   Can be specified with '@name', too


 -l [ --write-log ]       Writes a log file to:
 --log-file arg           Unlike to --write-log this allows to log to an 
                          arbitrary file
 -u [ --user-cfg ] arg    User config file to load/save user settings
 -s [ --system-cfg ] arg  Systen config file to load/save system settings
 -t [ --run-test ] arg    Test level
 -M [ --module-path ] arg Additional module paths
 -P [ --python-path ] arg Additional python paths

Generating a Backtrace

If you are running a version of FreeCAD from the bleeding edge of the development curve, it may "crash". You can help solve such problems by providing the developers with a "backtrace". To do this, you need to be running a "debug build" of the software. "Debug build" is a parameter that is set at compile time, so you'll either need to compile FreeCAD yourself, or obtain a pre-compiled "debug" version.

For Linux


  • software package gdb installed
  • a debug build of FreeCAD
  • a FreeCAD model that causes a crash

Steps: Enter the following in your terminal window:

$ cd FreeCAD/bin
$ gdb FreeCAD

GNUdebugger will output some initializing information. The (gdb) shows GNUDebugger is running in the terminal, now input:

(gdb) handle SIG33 noprint nostop
(gdb) run

FreeCAD will now start up. Perform the steps that cause FreeCAD to crash or freeze, then enter in the terminal window:

(gdb) bt

This will generate a lengthy listing of exactly what the program was doing when it crashed or froze. Include this with your problem report.

Python Debugging

Here is an example of using winpdb inside FreeCAD:

  1. Run winpdb and set the password (e.g. test)
  2. Create a Python file with this content
 import rpdb2
 import FreeCAD
 import Part
 import Draft
 print "hello"
 print "hello"
 import Draft
  1. Start FreeCAD and load the above file into FreeCAD
  2. Press F6 to execute it
  3. Now FreeCAD will become unresponsive because the Python debugger is waiting
  4. Switch to the Windpdb GUI and click on "Attach". After a few seconds an item "<Input>" appears where you have to double-click
  5. Now the currently executed script appears in Winpdb.
  6. Set a break at the last line and press F5
  7. Now press F7 to step into the Python code of Draft.makeWire
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎български • ‎русский • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎