Curves ParametricComb/it

From FreeCAD Documentation
Revision as of 20:27, 3 May 2020 by Renatorivo (talk | contribs) (Created page with "==Descrizione==")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Other languages:

Curves ParametricComb

Menu location
Curves → Comb plot
Workbenches
Curves
Default shortcut
None
Introduced in version
-
See also
None

Descrizione

The Curves ParametricComb can help to visualize the regularity or smoothness of a curve as well as the continuity between two curves. Note: A comb is only for visualization.

A 3D comb will be created for 3D curves. Sample and scale can be changed. This tool is part of the external workbench called Curves.

Above: shows the before (left) and after (right) application of the ParametricComb AKA Comb plot tool

Usage

  1. Switch to the Curves workbench (install from Addon Manager is necessary, if not previously installed)
  2. Select an object in the tree view (sketch, wire...) or one or several edges in the 3D view (use CTRL key)
  3. Invoke the Curves ParametricComb command several ways:
    • Press the button
    • Use the Curves → Comb plot
  4. A comb is created, showing the curvature of the selection.


Notes

  • This tool functions as a visual aid.

Limitations

Properties

Scripting