Curves EditierbarerSpline

From FreeCAD Documentation
This page is a translated version of the page Curves EditableSpline and the translation is 93% complete.
Other languages:

Curves EditierbarerSpline

Menüeintrag
Curves → Freehand BSpline
Arbeitsbereich
Curves
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Beschreibung

Das Werkzeug Curves EditierbarerSpline erstellt eine Freihand-B-Spline-Kurve. Dieses Werkzeug ist Teil des Externen Arbeitsbereichs Curves.

Anwendung

  1. Zum Arbeitsbereich Curves wechseln (muss mit dem Addon-Manager installiert werden, wenn noch nicht geschehen).
  2. Wahlweise Knotenpunkte, Kanten und/oder Flächen auswählen:
    • Die Anzahl der Knotenpunkte des Splines entspricht der Anzahl der ausgewählten Elemente.
    • Die Spline-Knoten rasten auf die ausgewählten Knotenpunkte und die Mittelpunkte der ausgewählten Kanten und Flächen ein.
  3. Es gibt mehrere Möglichkeiten den Befehl aufzurufen:
    • Die Schaltfläche in der Curves-Symbolleiste drücken.
    • Den Menüeintrag Curves → Freehand BSpline auswählen.

Optionen

Während der Ausführung des Befehls ist ein besonderer Bearbeitungsmodus aktiv und es gibt einige Aktionen und Verhaltensweisen, die mit Tasten und Mausklicks gesteuert werden können.

  • To move a vertex or guide line (guide lines are the straight lines between vertexes) press and hold down the left mouse button on it, and move the mouse.
  • The A key selects or deselects all vertexes and guide lines.
  • The I key will add a vertex to the segment belonging to the selected guide line. The new vertex will be selected.
  • The T key sets or un-sets tangent mode for the selected vertexes or guide lines (relative to the view direction).
  • The P key aligns selected objects.
  • The S key can be used to snap a vertex to a vertex belonging to another B-spline. With a vertex of the B-spline being edited selected, hold down the Ctrl key and add the target vertex to the selection, then hit the S key. The vertexes are snapped together.
  • To unsnap vertexes, select the snapped vertex pair and again hit the S key. The vertex of the B-spline being edited remains selected and can now be moved.
  • The L key sets or un-sets the linear interpolation.
  • The X, Y or Z keys can be used to constrain the movement of the object being dragged. While dragging, hit the desired axis key. Hit the same key again to disable the constraint.
  • The Q key finishes the command and exits edit mode.

Einschränkungen

Eigenschaften

Skripten