Code snippets: Difference between revisions
(replace "</syntaxhighlight>" to "{{Code|code= ") |
mNo edit summary |
||
(80 intermediate revisions by 13 users not shown) | |||
Line 1: | Line 1: | ||
<languages/> |
<languages/> |
||
<translate> |
<translate> |
||
<!--T:1--> |
|||
In this page we will show how to build a simple Qt Dialog with [http://qt-project.org/doc/qt-4.8/designer-manual.html Qt Designer], Qt's official tool for designing interfaces, then convert it to python code, then use it inside FreeCAD. I'll assume in the example that you know how to edit and run python scripts already, and that you can do simple things in a terminal window such as navigate, etc. You must also have, of course, pyqt installed. |
|||
</translate> |
|||
== Designing the dialog == <!--T:2--> |
|||
{{TOCright}} |
|||
In CAD applications, designing a good UI (User Interface) is very important. About everything the user will do will be through some piece of interface: reading dialog boxes, pressing buttons, choosing between icons, etc. So it is very important to think carefully to what you want to do, how you want the user to behave, and how will be the workflow of your action. |
|||
<translate> |
|||
<!--T: |
==Introduction== <!--T:79--> |
||
There are a couple of concepts to know when designing interface: |
|||
* [http://en.wikipedia.org/wiki/Modal_window Modal/non-modal dialogs]: A modal dialog appears in front of your screen, stopping the action of the main window, forcing the user to respond to the dialog, while a non-modal dialog doesn't stop you from working on the main window. In some case the first is better, in other cases not. |
|||
* Identifying what is required and what is optional: Make sure the user knows what he must do. Label everything with proper description, use tooltips, etc. |
|||
* Separating commands from parameters: This is usually done with buttons and text input fields. The user knows that clicking a button will produce an action while changing a value inside a text field will change a parameter somewhere. Nowadays, though, users usually know well what is a button, what is an input field, etc. The interface toolkit we are using, Qt, is a state-of-the-art toolkit, and we won't have to worry much about making things clear, since they will already be very clear by themselves. |
|||
<!--T: |
<!--T:1--> |
||
This page contains examples, pieces, chunks of FreeCAD python code collected from users experiences and discussions on the [https://forum.freecadweb.org/viewforum.php?f=22 forums]. Read and use it as a start for your own scripts... |
|||
So, now that we have well defined what we will do, it's time to open the qt designer. Let's design a very simple dialog, like this: |
|||
<!--T: |
==Snippets== <!--T:89--> |
||
[[Image:Qttestdialog.jpg]] |
|||
<!--T: |
===A typical InitGui.py file=== <!--T:2--> |
||
We will then use this dialog in FreeCAD to produce a nice rectangular plane. You might find it not very useful to produce nice rectangular planes, but it will be easy to change it later to do more complex things. When you open it, Qt Designer looks like this: |
|||
<!--T: |
<!--T:90--> |
||
Every module must contain, besides your main module file, an InitGui.py file, responsible for inserting the module in the main Gui. This is an example of a simple one. |
|||
[[Image:Qtdesigner-screenshot.jpg]] |
|||
</translate> |
|||
<!--T:8--> |
|||
{{Code|code= |
|||
It is very simple to use. On the left bar you have elements that can be dragged on your widget. On the right side you have properties panels displaying all kinds of editable properties of selected elements. So, begin with creating a new widget. Select "Dialog without buttons", since we don't want the default Ok/Cancel buttons. Then, drag on your widget '''3 labels''', one for the title, one for writing "Height" and one for writing "Width". Labels are simple texts that appear on your widget, just to inform the user. If you select a label, on the right side will appear several properties that you can change if you want, such as font style, height, etc. |
|||
class ScriptWorkbench (Workbench): |
|||
MenuText = "Scripts" |
|||
def Initialize(self): |
|||
import Scripts # assuming Scripts.py is your module |
|||
list = ["Script_Cmd"] # That list must contain command names, that can be defined in Scripts.py |
|||
self.appendToolbar("My Scripts",list) |
|||
Gui.addWorkbench(ScriptWorkbench()) |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
<!--T:9--> |
|||
Then, add '''2 LineEdits''', which are text fields that the user can fill in, one for the height and one for the width. Here too, we can edit properties. For example, why not set a default value? For example 1.00 for each. This way, when the user will see the dialog, both values will be filled already and if he is satisfied he can directly press the button, saving precious time. Then, add a '''PushButton''', which is the button the user will need to press after he filled the 2 fields. |
|||
<!--T: |
===A typical module file=== <!--T:3--> |
||
Note that I chose very simple controls here, but Qt has many more options, for example you could use Spinboxes instead of LineEdits, etc... Have a look at what is available, you will surely have other ideas. |
|||
<!--T: |
<!--T:92--> |
||
This is an example of a main module file, containing everything your module does. It is the Scripts.py file invoked by the previous example. You can have all your custom commands here. |
|||
That's about all we need to do in Qt Designer. One last thing, though, let's rename all our elements with easier names, so it will be easier to identify them in our scripts: |
|||
<!--T:12--> |
|||
[[Image:Qtpropeditor.jpg]] |
|||
</translate> |
</translate> |
||
{{Code|code= |
|||
import FreeCAD, FreeCADGui |
|||
class ScriptCmd: |
|||
def Activated(self): |
|||
# Here your write what your ScriptCmd does... |
|||
FreeCAD.Console.PrintMessage('Hello, World!') |
|||
def GetResources(self): |
|||
return {'Pixmap' : 'path_to_an_icon/myicon.png', 'MenuText': 'Short text', 'ToolTip': 'More detailed text'} |
|||
FreeCADGui.addCommand('Script_Cmd', ScriptCmd()) |
|||
}} |
|||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
== Converting our dialog to python == <!--T:13--> |
|||
===Import a new filetype=== <!--T:4--> |
|||
<!--T:94--> |
|||
Making an importer for a new filetype in FreeCAD is easy. FreeCAD doesn't consider that you import data in an opened document, but rather that you simply can directly open the new filetype. So what you need to do is to add the new file extension to FreeCAD's list of known extensions, and write the code that will read the file and create the FreeCAD objects you want: |
|||
<!--T:5--> |
|||
This line must be added to the InitGui.py file to add the new file extension to the list: |
|||
</translate> |
</translate> |
||
{{Code|code= |
|||
# Assumes Import_Ext.py is the file that has the code for opening and reading .ext files |
|||
FreeCAD.addImportType("Your new File Type (*.ext)","Import_Ext") |
|||
}} |
|||
<translate> |
<translate> |
||
<!--T:14--> |
|||
<!--T:6--> |
|||
Now, let's save our widget somewhere. It will be saved as an .ui file, that we will easily convert to python script with pyuic. On windows, the pyuic program is bundled with pyqt (to be verified), on linux you probably will need to install it separately from your package manager (on debian-based systems, it is part of the pyqt4-dev-tools package). To do the conversion, you'll need to open a terminal window (or a command prompt window on windows), navigate to where you saved your .ui file, and issue: |
|||
Then in the Import_Ext.py file: |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
def open(filename): |
|||
pyuic mywidget.ui > mywidget.py |
|||
doc=App.newDocument() |
|||
# here you do all what is needed with filename, read, classify data, create corresponding FreeCAD objects |
|||
doc.recompute() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:56--> |
|||
<!--T:7--> |
|||
In Windows pyuic.py is located in "C:\Python27\Lib\site-packages\PyQt4\uic\pyuic.py" |
|||
To export your document to some new filetype works the same way, except that you use: |
|||
For conversion create a batch file called "compQt4.bat: |
|||
FreeCAD.addExportType("Your new File Type (*.ext)","Export_Ext") |
|||
</translate>{{Top}}<translate> |
|||
===Add a line=== <!--T:8--> |
|||
<!--T:96--> |
|||
A line simply has 2 points. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
@"C:\Python27\python" "C:\Python27\Lib\site-packages\PyQt4\uic\pyuic.py" -x %1.ui > %1.py |
|||
import Part,PartGui |
|||
doc=App.activeDocument() |
|||
# add a line element to the document and set its points |
|||
l=Part.LineSegment() |
|||
l.StartPoint=(0.0,0.0,0.0) |
|||
l.EndPoint=(1.0,1.0,1.0) |
|||
doc.addObject("Part::Feature","Line").Shape=l.toShape() |
|||
doc.recompute() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:57--> |
|||
</translate>{{Top}}<translate> |
|||
In the DOS console type without extension |
|||
===Add a polygon=== <!--T:9--> |
|||
<!--T:98--> |
|||
A polygon is simply a set of connected line segments (a polyline in AutoCAD). It doesn't need to be closed. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import Part, PartGui |
|||
compQt4 myUiFile |
|||
doc = App.activeDocument() |
|||
n = list() |
|||
# create a 3D vector, set its coordinates and add it to the list |
|||
v = App.Vector(0,0,0) |
|||
n.append(v) |
|||
v = App.Vector(10,0,0) |
|||
n.append(v) |
|||
#... repeat for all nodes |
|||
# Create a polygon object and set its nodes |
|||
p = doc.addObject("Part::Polygon","Polygon") |
|||
p.Nodes = n |
|||
doc.recompute() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:58--> |
|||
</translate>{{Top}}<translate> |
|||
Into Linux : to do |
|||
===Add and remove an object to/from a group=== <!--T:10--> |
|||
</translate> |
</translate> |
||
{{Code|code= |
|||
doc=App.activeDocument() |
|||
grp=doc.addObject("App::DocumentObjectGroup", "Group") |
|||
lin=doc.addObject("Part::Feature", "Line") |
|||
grp.addObject(lin) # adds the lin object to the group grp |
|||
grp.removeObject(lin) # removes the lin object from the group grp |
|||
}} |
|||
<translate> |
|||
<!--T: |
<!--T:11--> |
||
Note: You can even add other groups to a group... |
|||
</translate>{{Top}}<translate> |
|||
===Add a Mesh=== <!--T:12--> |
|||
</translate> |
|||
{{Code|code= |
|||
import Mesh |
|||
doc=App.activeDocument() |
|||
# create a new empty mesh |
|||
m = Mesh.Mesh() |
|||
# build up box out of 12 facets |
|||
m.addFacet(0.0,0.0,0.0, 0.0,0.0,1.0, 0.0,1.0,1.0) |
|||
m.addFacet(0.0,0.0,0.0, 0.0,1.0,1.0, 0.0,1.0,0.0) |
|||
m.addFacet(0.0,0.0,0.0, 1.0,0.0,0.0, 1.0,0.0,1.0) |
|||
m.addFacet(0.0,0.0,0.0, 1.0,0.0,1.0, 0.0,0.0,1.0) |
|||
m.addFacet(0.0,0.0,0.0, 0.0,1.0,0.0, 1.0,1.0,0.0) |
|||
m.addFacet(0.0,0.0,0.0, 1.0,1.0,0.0, 1.0,0.0,0.0) |
|||
m.addFacet(0.0,1.0,0.0, 0.0,1.0,1.0, 1.0,1.0,1.0) |
|||
m.addFacet(0.0,1.0,0.0, 1.0,1.0,1.0, 1.0,1.0,0.0) |
|||
m.addFacet(0.0,1.0,1.0, 0.0,0.0,1.0, 1.0,0.0,1.0) |
|||
m.addFacet(0.0,1.0,1.0, 1.0,0.0,1.0, 1.0,1.0,1.0) |
|||
m.addFacet(1.0,1.0,0.0, 1.0,1.0,1.0, 1.0,0.0,1.0) |
|||
m.addFacet(1.0,1.0,0.0, 1.0,0.0,1.0, 1.0,0.0,0.0) |
|||
# scale to a edge langth of 100 |
|||
m.scale(100.0) |
|||
# add the mesh to the active document |
|||
me=doc.addObject("Mesh::Feature","Cube") |
|||
me.Mesh=m |
|||
}} |
|||
<translate> |
<translate> |
||
<!--T:59--> |
|||
</translate>{{Top}}<translate> |
|||
Since FreeCAD progressively moved away from PyQt after version 0.13, in favour of [http://qt-project.org/wiki/PySide PySide] (Choose your PySide install [http://pyside.readthedocs.org/en/latest/building/ building PySide]), to make the file based on PySide now you have to use: |
|||
===Add an arc or a circle=== <!--T:13--> |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import Part |
|||
pyside-uic mywidget.ui -o mywidget.py |
|||
doc = App.activeDocument() |
|||
c = Part.Circle() |
|||
c.Radius=10.0 |
|||
f = doc.addObject("Part::Feature", "Circle") # create a document with a circle feature |
|||
f.Shape = c.toShape() # Assign the circle shape to the shape property |
|||
doc.recompute() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:60--> |
|||
</translate>{{Top}}<translate> |
|||
In Windows uic.py are located in "C:\Python27\Lib\site-packages\PySide\scripts\uic.py" |
|||
For create batch file "compSide.bat": |
|||
===Access and change the representation of an object=== <!--T:14--> |
|||
<!--T:103--> |
|||
Each object in a FreeCAD document has an associated view representation object that stores all the parameters that define how that object appears: i.e. color, linewidth, etc... See also [[#List the components of an object|List the components of an object]] snippet below |
|||
</translate> |
|||
{{Code|code= |
{{Code|code= |
||
gad = Gui.activeDocument() # access the active document containing all |
|||
@"C:\Python27\python" "C:\Python27\Lib\site-packages\PySide\scripts\uic.py" %1.ui > %1.py |
|||
# view representations of the features in the |
|||
# corresponding App document |
|||
v = gad.getObject("Cube") # access the view representation to the Mesh feature 'Cube' |
|||
v.ShapeColor # prints the color to the console |
|||
v.ShapeColor=(1.0,1.0,1.0) # sets the shape color to white |
|||
}} |
}} |
||
<translate> |
|||
In the DOS console type without extension |
|||
</translate>{{Top}}<translate> |
|||
===Replace the form of mouse with one image=== <!--T:142--> |
|||
</translate> |
|||
{{Code|code= |
{{Code|code= |
||
import PySide2 |
|||
compSide myUiFile |
|||
from PySide2 import QtCore, QtGui, QtWidgets |
|||
from PySide2.QtWidgets import QApplication |
|||
from PySide2.QtGui import QColor, QPixmap, QImage, QPainter, QCursor |
|||
from PySide2.QtCore import Qt |
|||
myImage = QtGui.QPixmap("Complete_Path_to_image.bmp") |
|||
cursor = QtGui.QCursor(myImage) |
|||
QtWidgets.QApplication.setOverrideCursor(QtGui.QCursor(cursor)) |
|||
}} |
}} |
||
<translate> |
|||
Into Linux : to do |
|||
</translate>{{Top}}<translate> |
|||
===Replace the form of mouse with one image (cross) include=== <!--T:144--> |
|||
<!--T:145--> |
|||
The image is created by Gimp exported in a .XPM file. Copy and use the code between the bracket '''"{"''' code to copy '''"}"''' |
|||
<!--T:15--> |
|||
On some systems the program is called pyuic4 instead of pyuic. This will simply convert the .ui file into a python script. If we open the mywidget.py file, its contents is very easy to understand: |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import PySide2 |
|||
from PySide2 import QtCore, QtGui, QtWidgets |
|||
from PySide2.QtWidgets import QApplication |
|||
from PySide2.QtGui import QColor, QPixmap, QImage, QPainter, QCursor |
|||
from PySide2.QtCore import Qt |
|||
cross32x32Icon = [ |
|||
class Ui_Dialog(object): |
|||
"32 32 2 1", |
|||
def setupUi(self, Dialog): |
|||
" c None", |
|||
Dialog.setObjectName("Dialog") |
|||
". c #FF0000", |
|||
Dialog.resize(187, 178) |
|||
" . ", |
|||
" . ", |
|||
self.title.setGeometry(QtCore.QRect(10, 10, 271, 16)) |
|||
" . ", |
|||
self.title.setObjectName("title") |
|||
" . ", |
|||
self.label_width = QtGui.QLabel(Dialog) |
|||
. |
" . ", |
||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" ", |
|||
"............... . ..............", |
|||
" ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . ", |
|||
" . " |
|||
] |
|||
myImage = QtGui.QPixmap(cross32x32Icon) |
|||
self.retranslateUi(Dialog) |
|||
cursor = QtGui.QCursor(myImage) |
|||
QtCore.QMetaObject.connectSlotsByName(Dialog) |
|||
QtWidgets.QApplication.setOverrideCursor(QtGui.QCursor(cursor)) |
|||
def retranslateUi(self, Dialog): |
|||
Dialog.setWindowTitle(QtGui.QApplication.translate("Dialog", "Dialog", None, QtGui.QApplication.UnicodeUTF8)) |
|||
self.title.setText(QtGui.QApplication.translate("Dialog", "Plane-O-Matic", None, QtGui.QApplication.UnicodeUTF8)) |
|||
... |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:16--> |
|||
As you see it has a very simple structure: a class named Ui_Dialog is created, that stores the interface elements of our widget. That class has two methods, one for setting up the widget, and one for translating its contents, which is part of the general Qt mechanism for translating interface elements. The setup method simply creates, one by one, the widgets as we defined them in Qt Designer, and sets their options as we decided earlier. Then, the whole interface gets translated, and finally, the slots get connected (we'll talk about that later). |
|||
</translate>{{Top}}<translate> |
|||
<!--T:17--> |
|||
We can now create a new widget and use this class to create its interface. We can already see our widget in action, by putting our mywidget.py file in a place where FreeCAD will find it (in the FreeCAD bin directory, or in any of the Mod subdirectories), and, in the FreeCAD python interpreter, issue: |
|||
===Observe camera change in the 3D viewer via Python=== <!--T:159--> |
|||
<!--T:160--> |
|||
This can be done adding a [https://www.coin3d.org/Coin/html/classSoNodeSensor.html Node sensor] to the camera: |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
from |
from pivy import coin |
||
def callback(*args): |
|||
import mywidget |
|||
cam, sensor = args |
|||
d = QtGui.QWidget() |
|||
print() |
|||
d.ui = mywidget.Ui_Dialog() |
|||
print("Cam position : {}".format(cam.position.getValue().getValue())) |
|||
d.ui.setupUi(d) |
|||
print("Cam rotation : {}".format(cam.orientation.getValue().getValue())) |
|||
d.show() |
|||
camera_node = Gui.ActiveDocument.ActiveView.getCameraNode() |
|||
node_sensor = coin.SoNodeSensor(callback, camera_node) |
|||
node_sensor.attach(camera_node)}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
===Observe mouse events in the 3D viewer via Python=== <!--T:15--> |
|||
<!--T:105--> |
|||
The Inventor framework allows to add one or more callback nodes to the scenegraph of the viewer. By default in FreeCAD one callback node is installed per viewer which allows to add global or static C++ functions. In the appropriate Python binding some methods are provided to make use of this technique from within Python code. |
|||
</translate> |
|||
{{Code|code= |
|||
App.newDocument() |
|||
v=Gui.activeDocument().activeView() |
|||
#This class logs any mouse button events. As the registered callback function fires twice for 'down' and |
|||
#'up' events we need a boolean flag to handle this. |
|||
class ViewObserver: |
|||
def logPosition(self, info): |
|||
down = (info["State"] == "DOWN") |
|||
pos = info["Position"] |
|||
if (down): |
|||
FreeCAD.Console.PrintMessage("Clicked on position: ("+str(pos[0])+", "+str(pos[1])+")\n") |
|||
o = ViewObserver() |
|||
c = v.addEventCallback("SoMouseButtonEvent",o.logPosition) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:18--> |
|||
And our dialog will appear! Note that our Python interpreter is still working, we have a non-modal dialog. So, to close it, we can (apart from clicking its close icon, of course) issue: |
|||
<!--T:16--> |
|||
Now, pick somewhere on the area in the 3D viewer and observe the messages in the output window. To finish the observation just call |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
v.removeEventCallback("SoMouseButtonEvent",c) |
|||
d.hide() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:17--> |
|||
== Making our dialog do something == <!--T:19--> |
|||
The following event types are supported |
|||
Now that we can show and hide our dialog, we just need to add one last part: To make it do something! If you play a bit with Qt designer, you'll quickly discover a whole section called "signals and slots". Basically, it works like this: elements on your widgets (in Qt terminology, those elements are themselves widgets) can send signals. Those signals differ according to the widget type. For example, a button can send a signal when it is pressed and when it is released. Those signals can be connected to slots, which can be special functionality of other widgets (for example a dialog has a "close" slot to which you can connect the signal from a close button), or can be custom functions. The [http://www.riverbankcomputing.co.uk/static/Docs/PyQt4/html/classes.html PyQt Reference Documentation] lists all the qt widgets, what they can do, what signals they can send, etc... |
|||
* SoEvent -- all kind of events |
|||
* SoButtonEvent -- all mouse button and key events |
|||
* SoLocation2Event -- 2D movement events (normally mouse movements) |
|||
* SoMotion3Event -- 3D movement events (normally spaceball) |
|||
* SoKeyboardEvent -- key down and up events |
|||
* SoMouseButtonEvent -- mouse button down and up events |
|||
* SoSpaceballButtonEvent -- spaceball button down and up events |
|||
<!--T:18--> |
|||
The Python function that can be registered with addEventCallback() expects a dictionary. Depending on the watched event the dictionary can contain different keys. |
|||
For all events it has the keys: |
|||
* Type -- the name of the event type i.e. SoMouseEvent, SoLocation2Event, ... |
|||
* Time -- the current time as string |
|||
* Position -- a tuple of two integers, mouse position |
|||
* ShiftDown -- a boolean, true if Shift was pressed otherwise false |
|||
* CtrlDown -- a boolean, true if Ctrl was pressed otherwise false |
|||
* AltDown -- a boolean, true if Alt was pressed otherwise false |
|||
For all button events, i.e. keyboard, mouse or spaceball events |
|||
* State -- A string 'UP' if the button was up, 'DOWN' if it was down or 'UNKNOWN' for all other cases |
|||
For keyboard events: |
|||
* Key -- a character of the pressed key |
|||
For mouse button event |
|||
* Button -- The pressed button, could be BUTTON1, ..., BUTTON5 or ANY |
|||
For spaceball events: |
|||
* Button -- The pressed button, could be BUTTON1, ..., BUTTON7 or ANY |
|||
And finally motion events: |
|||
* Translation -- a tuple of three floats |
|||
* Rotation -- a quaternion for the rotation, i.e. a tuple of four floats |
|||
</translate>{{Top}}<translate> |
|||
===Display keys pressed and Events command=== <!--T:50--> |
|||
<!--T:107--> |
|||
This macro displays in the report view the keys pressed and all events command |
|||
<!--T:20--> |
|||
What we will do here, is to create a new function that will create a plane based on height and width, and to connect that function to the pressed signal emitted by our "Create!" button. So, let's begin with importing our FreeCAD modules, by putting the following line at the top of the script, where we already import QtCore and QtGui: |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
App.newDocument() |
|||
import FreeCAD, Part |
|||
v=Gui.activeDocument().activeView() |
|||
class ViewObserver: |
|||
def logPosition(self, info): |
|||
try: |
|||
down = (info["Key"]) |
|||
FreeCAD.Console.PrintMessage(str(down)+"\n") # here the character pressed |
|||
FreeCAD.Console.PrintMessage(str(info)+"\n") # list all events command |
|||
FreeCAD.Console.PrintMessage("_______________________________________"+"\n") |
|||
except Exception: |
|||
None |
|||
o = ViewObserver() |
|||
c = v.addEventCallback("SoEvent",o.logPosition) |
|||
#v.removeEventCallback("SoEvent",c) # remove ViewObserver |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:21--> |
|||
</translate>{{Top}}<translate> |
|||
Then, let's add a new function to our Ui_Dialog class: |
|||
===Manipulate the scenegraph in Python=== <!--T:19--> |
|||
<!--T:109--> |
|||
It is also possible to get and change the scenegraph in Python, with the 'pivy' module -- a Python binding for Coin. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
from pivy.coin import * # load the pivy module |
|||
def createPlane(self): |
|||
view = Gui.ActiveDocument.ActiveView # get the active viewer |
|||
try: |
|||
root = view.getSceneGraph() # the root is an SoSeparator node |
|||
# first we check if valid numbers have been entered |
|||
root.addChild(SoCube()) |
|||
w = float(self.width.text()) |
|||
view.fitAll() |
|||
h = float(self.height.text()) |
|||
except ValueError: |
|||
print "Error! Width and Height values must be valid numbers!" |
|||
else: |
|||
# create a face from 4 points |
|||
p1 = FreeCAD.Vector(0,0,0) |
|||
p2 = FreeCAD.Vector(w,0,0) |
|||
p3 = FreeCAD.Vector(w,h,0) |
|||
p4 = FreeCAD.Vector(0,h,0) |
|||
pointslist = [p1,p2,p3,p4,p1] |
|||
mywire = Part.makePolygon(pointslist) |
|||
myface = Part.Face(mywire) |
|||
Part.show(myface) |
|||
self.hide() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:22--> |
|||
<!--T:20--> |
|||
Then, we need to inform Qt to connect the button to the function, by placing the following line just before QtCore.QMetaObject.connectSlotsByName(Dialog): |
|||
The Python API of pivy is created by using the tool SWIG. As we use in FreeCAD some self-written nodes you cannot create them directly in Python. |
|||
However, it is possible to create a node by its internal name. An instance of the type 'SoFCSelection' can be created with |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
type = SoType.fromName("SoFCSelection") |
|||
QtCore.QObject.connect(self.create,QtCore.SIGNAL("pressed()"),self.createPlane) |
|||
node = type.createInstance() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:23--> |
|||
</translate>{{Top}}<translate> |
|||
This, as you see, connects the pressed() signal of our create object (the "Create!" button), to a slot named createPlane, which we just defined. That's it! Now, as a final touch, we can add a little function to create the dialog, it will be easier to call. Outside the Ui_Dialog class, let's add this code: |
|||
===Add and remove objects to/from the scenegraph=== <!--T:21--> |
|||
<!--T:111--> |
|||
Adding new nodes to the scenegraph can be done this way. Take care of always adding a SoSeparator to contain the geometry, coordinates and material info of a same object. The following example adds a red line from (0,0,0) to (10,0,0): |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
from pivy import coin |
|||
class plane(): |
|||
sg = Gui.ActiveDocument.ActiveView.getSceneGraph() |
|||
def __init__(self): |
|||
co = coin.SoCoordinate3() |
|||
self.d = QtGui.QWidget() |
|||
pts = [[0,0,0],[10,0,0]] |
|||
self.ui = Ui_Dialog() |
|||
co.point.setValues(0,len(pts),pts) |
|||
self.ui.setupUi(self.d) |
|||
ma = coin.SoBaseColor() |
|||
self.d.show() |
|||
ma.rgb = (1,0,0) |
|||
li = coin.SoLineSet() |
|||
li.numVertices.setValue(2) |
|||
no = coin.SoSeparator() |
|||
no.addChild(co) |
|||
no.addChild(ma) |
|||
no.addChild(li) |
|||
sg.addChild(no) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:24--> |
|||
<!--T:22--> |
|||
(Python reminder: the __init__ method of a class is automatically executed whenever a new object is created!) |
|||
To remove it, simply issue: |
|||
Then, from FreeCAD, we only need to do: |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
sg.removeChild(no) |
|||
import mywidget |
|||
myDialog = mywidget.plane() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:25--> |
|||
That's all Folks... Now you can try all kinds of things, like for example inserting your widget in the FreeCAD interface (see the [[Code snippets]] page), or making much more advanced custom tools, by using other elements on your widget. |
|||
</translate>{{Top}}<translate> |
|||
== The complete script == <!--T:26--> |
|||
This is the complete script, for reference: |
|||
</translate><div class="mw-collapsible mw-collapsed toccolours"><translate> |
|||
===Save the sceneGraph in 3 series of 36 files=== <!--T:60--> |
|||
<!--T:80--> |
|||
View the code snippet by expanding this section |
|||
</translate><div class="mw-collapsible-content"><translate> |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import math |
|||
# -*- coding: utf-8 -*- |
|||
import time |
|||
from FreeCAD import Base |
|||
from pivy import coin |
|||
size=(1000,1000) |
|||
# Form implementation generated from reading ui file 'mywidget.ui' |
|||
dirname = "C:/Temp/animation/" |
|||
# |
|||
steps=36 |
|||
# Created: Mon Jun 1 19:09:10 2009 |
|||
angle=2*math.pi/steps |
|||
# by: PyQt4 UI code generator 4.4.4 |
|||
# Modified for PySide 16:02:2015 |
|||
# WARNING! All changes made in this file will be lost! |
|||
matX=Base.Matrix() |
|||
from PySide import QtCore, QtGui |
|||
matX.rotateX(angle) |
|||
import FreeCAD, Part |
|||
stepsX=Base.Placement(matX).Rotation |
|||
matY=Base.Matrix() |
|||
class Ui_Dialog(object): |
|||
matY.rotateY(angle) |
|||
def setupUi(self, Dialog): |
|||
stepsY=Base.Placement(matY).Rotation |
|||
Dialog.setObjectName("Dialog") |
|||
Dialog.resize(187, 178) |
|||
self.title = QtGui.QLabel(Dialog) |
|||
self.title.setGeometry(QtCore.QRect(10, 10, 271, 16)) |
|||
self.title.setObjectName("title") |
|||
self.label_width = QtGui.QLabel(Dialog) |
|||
self.label_width.setGeometry(QtCore.QRect(10, 50, 57, 16)) |
|||
self.label_width.setObjectName("label_width") |
|||
self.label_height = QtGui.QLabel(Dialog) |
|||
self.label_height.setGeometry(QtCore.QRect(10, 90, 57, 16)) |
|||
self.label_height.setObjectName("label_height") |
|||
self.width = QtGui.QLineEdit(Dialog) |
|||
self.width.setGeometry(QtCore.QRect(60, 40, 111, 26)) |
|||
self.width.setObjectName("width") |
|||
self.height = QtGui.QLineEdit(Dialog) |
|||
self.height.setGeometry(QtCore.QRect(60, 80, 111, 26)) |
|||
self.height.setObjectName("height") |
|||
self.create = QtGui.QPushButton(Dialog) |
|||
self.create.setGeometry(QtCore.QRect(50, 140, 83, 26)) |
|||
self.create.setObjectName("create") |
|||
matZ=Base.Matrix() |
|||
self.retranslateUi(Dialog) |
|||
matZ.rotateZ(angle) |
|||
QtCore.QObject.connect(self.create,QtCore.SIGNAL("pressed()"),self.createPlane) |
|||
stepsZ=Base.Placement(matZ).Rotation |
|||
QtCore.QMetaObject.connectSlotsByName(Dialog) |
|||
view=Gui.ActiveDocument.ActiveView |
|||
def retranslateUi(self, Dialog): |
|||
cam=view.getCameraNode() |
|||
Dialog.setWindowTitle(QtGui.QApplication.translate("Dialog", "Dialog", None, QtGui.QApplication.UnicodeUTF8)) |
|||
rotCamera=Base.Rotation(*cam.orientation.getValue().getValue()) |
|||
self.title.setText(QtGui.QApplication.translate("Dialog", "Plane-O-Matic", None, QtGui.QApplication.UnicodeUTF8)) |
|||
self.label_width.setText(QtGui.QApplication.translate("Dialog", "Width", None, QtGui.QApplication.UnicodeUTF8)) |
|||
self.label_height.setText(QtGui.QApplication.translate("Dialog", "Height", None, QtGui.QApplication.UnicodeUTF8)) |
|||
self.create.setText(QtGui.QApplication.translate("Dialog", "Create!", None, QtGui.QApplication.UnicodeUTF8)) |
|||
# this sets the lookat point to the center of circumsphere of the global bounding box |
|||
def createPlane(self): |
|||
view.fitAll() |
|||
try: |
|||
# first we check if valid numbers have been entered |
|||
# the camera's position, i.e. the user's eye point |
|||
w = float(self.width.text()) |
|||
position=Base.Vector(*cam.position.getValue().getValue()) |
|||
h = float(self.height.text()) |
|||
distance=cam.focalDistance.getValue() |
|||
except ValueError: |
|||
print "Error! Width and Height values must be valid numbers!" |
|||
# view direction |
|||
else: |
|||
vec=rotCamera.multVec(Base.Vector(0,0,-1)) |
|||
# create a face from 4 points |
|||
p1 = FreeCAD.Vector(0,0,0) |
|||
# this is the point on the screen the camera looks at |
|||
p2 = FreeCAD.Vector(w,0,0) |
|||
# when rotating the camera we should make this point fix |
|||
p3 = FreeCAD.Vector(w,h,0) |
|||
lookat=position+vec*distance |
|||
p4 = FreeCAD.Vector(0,h,0) |
|||
pointslist = [p1,p2,p3,p4,p1] |
|||
# around x axis |
|||
mywire = Part.makePolygon(pointslist) |
|||
for i in range(steps): |
|||
myface = Part.Face(mywire) |
|||
rotCamera=stepsX.multiply(rotCamera) |
|||
Part.show(myface) |
|||
cam.orientation.setValue(*rotCamera.Q) |
|||
vec=rotCamera.multVec(Base.Vector(0,0,-1)) |
|||
pos=lookat-vec*distance |
|||
cam.position.setValue(pos.x,pos.y,pos.z) |
|||
Gui.updateGui() |
|||
time.sleep(0.3) |
|||
view.saveImage(dirname+"x-%d.png" % i,*size) |
|||
# around y axis |
|||
for i in range(steps): |
|||
rotCamera=stepsY.multiply(rotCamera) |
|||
cam.orientation.setValue(*rotCamera.Q) |
|||
vec=rotCamera.multVec(Base.Vector(0,0,-1)) |
|||
pos=lookat-vec*distance |
|||
cam.position.setValue(pos.x,pos.y,pos.z) |
|||
Gui.updateGui() |
|||
time.sleep(0.3) |
|||
view.saveImage(dirname+"y-%d.png" % i,*size) |
|||
# around z axis |
|||
class plane(): |
|||
for i in range(steps): |
|||
rotCamera=stepsZ.multiply(rotCamera) |
|||
self.d = QtGui.QWidget() |
|||
cam.orientation.setValue(*rotCamera.Q) |
|||
self.ui = Ui_Dialog() |
|||
vec=rotCamera.multVec(Base.Vector(0,0,-1)) |
|||
self.ui.setupUi(self.d) |
|||
pos=lookat-vec*distance |
|||
self.d.show() |
|||
cam.position.setValue(pos.x,pos.y,pos.z) |
|||
Gui.updateGui() |
|||
time.sleep(0.3) |
|||
view.saveImage(dirname+"z-%d.png" % i,*size) |
|||
}} |
}} |
||
</div> <!--END collapsible section. Do not remove! --> |
|||
</div> <!--END collapsible section. Do not remove! --> |
|||
<translate> |
<translate> |
||
==Creation of a dialog with buttons== <!--T:27--> |
|||
</translate>{{Top}}<translate> |
|||
===Method 1=== <!--T:28--> |
|||
An example of a dialog box complete with its connections. |
|||
</translate> |
|||
{{Code|code= |
|||
# -*- coding: utf-8 -*- |
|||
# Create by flachyjoe |
|||
===Add custom widgets to the interface=== <!--T:23--> |
|||
from PySide import QtCore, QtGui |
|||
<!--T:114--> |
|||
try: |
|||
You can create custom widgets with Qt designer, transform them into a python script, and then load them into the FreeCAD interface with PySide. |
|||
_fromUtf8 = QtCore.QString.fromUtf8 |
|||
except AttributeError: |
|||
def _fromUtf8(s): |
|||
return s |
|||
<!--T:24--> |
|||
try: |
|||
The python code produced by the Ui python compiler (the tool that converts qt-designer .ui files into python code) generally looks like this (it is simple, you can also code it directly in python): |
|||
_encoding = QtGui.QApplication.UnicodeUTF8 |
|||
def _translate(context, text, disambig): |
|||
return QtGui.QApplication.translate(context, text, disambig, _encoding) |
|||
except AttributeError: |
|||
def _translate(context, text, disambig): |
|||
return QtGui.QApplication.translate(context, text, disambig) |
|||
</translate> |
|||
{{Code|code= |
|||
class myWidget_Ui(object): |
|||
def setupUi(self, myWidget): |
|||
myWidget.setObjectName("my Nice New Widget") |
|||
myWidget.resize(QtCore.QSize(QtCore.QRect(0,0,300,100).size()).expandedTo(myWidget.minimumSizeHint())) # sets size of the widget |
|||
self.label = QtGui.QLabel(myWidget) # creates a label |
|||
self.label.setGeometry(QtCore.QRect(50,50,200,24)) # sets its size |
|||
self.label.setObjectName("label") # sets its name, so it can be found by name |
|||
def retranslateUi(self, draftToolbar): # built-in QT function that manages translations of widgets |
|||
class Ui_MainWindow(object): |
|||
myWidget.setWindowTitle(QtGui.QApplication.translate("myWidget", "My Widget", None, QtGui.QApplication.UnicodeUTF8)) |
|||
self.label.setText(QtGui.QApplication.translate("myWidget", "Welcome to my new widget!", None, QtGui.QApplication.UnicodeUTF8)) |
|||
}} |
|||
<translate> |
|||
<!--T:25--> |
|||
def __init__(self, MainWindow): |
|||
Then, all you need to do is to create a reference to the FreeCAD Qt window, insert a custom widget into it, and "transform" this widget into yours with the Ui code we just made: |
|||
self.window = MainWindow |
|||
</translate> |
|||
MainWindow.setObjectName(_fromUtf8("MainWindow")) |
|||
{{Code|code= |
|||
MainWindow.resize(400, 300) |
|||
app = QtGui.qApp |
|||
self.centralWidget = QtGui.QWidget(MainWindow) |
|||
FCmw = app.activeWindow() # the active qt window, = the freecad window since we are inside it |
|||
self.centralWidget.setObjectName(_fromUtf8("centralWidget")) |
|||
# FCmw = FreeCADGui.getMainWindow() # use this line if the 'addDockWidget' error is declared |
|||
myNewFreeCADWidget = QtGui.QDockWidget() # create a new dckwidget |
|||
myNewFreeCADWidget.ui = myWidget_Ui() # load the Ui script |
|||
myNewFreeCADWidget.ui.setupUi(myNewFreeCADWidget) # setup the ui |
|||
FCmw.addDockWidget(QtCore.Qt.RightDockWidgetArea,myNewFreeCADWidget) # add the widget to the main window |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
self.pushButton = QtGui.QPushButton(self.centralWidget) |
|||
self.pushButton.setGeometry(QtCore.QRect(30, 170, 93, 28)) |
|||
self.pushButton.setObjectName(_fromUtf8("pushButton")) |
|||
self.pushButton.clicked.connect(self.on_pushButton_clicked) #connection pushButton |
|||
===Add a Tab to the Combo View=== <!--T:26--> |
|||
self.lineEdit = QtGui.QLineEdit(self.centralWidget) |
|||
self.lineEdit.setGeometry(QtCore.QRect(30, 40, 211, 22)) |
|||
self.lineEdit.setObjectName(_fromUtf8("lineEdit")) |
|||
self.lineEdit.returnPressed.connect(self.on_lineEdit_clicked) #connection lineEdit |
|||
<!--T:116--> |
|||
self.checkBox = QtGui.QCheckBox(self.centralWidget) |
|||
The following code allows you to add a tab to the [[Combo view]], separate from the preexisting "Model" and "Tasks" tabs. It also uses the {{incode|uic}} module to load an UI file directly in that tab. |
|||
self.checkBox.setGeometry(QtCore.QRect(30, 90, 81, 20)) |
|||
self.checkBox.setChecked(True) |
|||
self.checkBox.setObjectName(_fromUtf8("checkBoxON")) |
|||
self.checkBox.clicked.connect(self.on_checkBox_clicked) #connection checkBox |
|||
</translate> |
|||
self.radioButton = QtGui.QRadioButton(self.centralWidget) |
|||
{{Code|code= |
|||
self.radioButton.setGeometry(QtCore.QRect(30, 130, 95, 20)) |
|||
# create new Tab in ComboView |
|||
self.radioButton.setObjectName(_fromUtf8("radioButton")) |
|||
from PySide import QtGui,QtCore |
|||
self.radioButton.clicked.connect(self.on_radioButton_clicked) #connection radioButton |
|||
#from PySide import uic |
|||
def getMainWindow(): |
|||
MainWindow.setCentralWidget(self.centralWidget) |
|||
"returns the main window" |
|||
# using QtGui.qApp.activeWindow() isn't very reliable because if another |
|||
# widget than the mainwindow is active (e.g. a dialog) the wrong widget is |
|||
# returned |
|||
toplevel = QtGui.qApp.topLevelWidgets() |
|||
for i in toplevel: |
|||
if i.metaObject().className() == "Gui::MainWindow": |
|||
return i |
|||
raise Exception("No main window found") |
|||
def getComboView(mw): |
|||
self.menuBar = QtGui.QMenuBar(MainWindow) |
|||
dw=mw.findChildren(QtGui.QDockWidget) |
|||
self.menuBar.setGeometry(QtCore.QRect(0, 0, 400, 26)) |
|||
for i in dw: |
|||
self.menuBar.setObjectName(_fromUtf8("menuBar")) |
|||
if str(i.objectName()) == "Combo View": |
|||
MainWindow.setMenuBar(self.menuBar) |
|||
return i.findChild(QtGui.QTabWidget) |
|||
elif str(i.objectName()) == "Python Console": |
|||
return i.findChild(QtGui.QTabWidget) |
|||
raise Exception ("No tab widget found") |
|||
mw = getMainWindow() |
|||
self.mainToolBar = QtGui.QToolBar(MainWindow) |
|||
tab = getComboView(getMainWindow()) |
|||
self.mainToolBar.setObjectName(_fromUtf8("mainToolBar")) |
|||
tab2=QtGui.QDialog() |
|||
MainWindow.addToolBar(QtCore.Qt.TopToolBarArea, self.mainToolBar) |
|||
tab.addTab(tab2,"A Special Tab") |
|||
#uic.loadUi("/myTaskPanelforTabs.ui",tab2) |
|||
self.statusBar = QtGui.QStatusBar(MainWindow) |
|||
tab2.show() |
|||
self.statusBar.setObjectName(_fromUtf8("statusBar")) |
|||
#tab.removeTab(2) |
|||
MainWindow.setStatusBar(self.statusBar) |
|||
}} |
|||
self.retranslateUi(MainWindow) |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
def retranslateUi(self, MainWindow): |
|||
MainWindow.setWindowTitle(_translate("MainWindow", "MainWindow", None)) |
|||
self.pushButton.setText(_translate("MainWindow", "OK", None)) |
|||
self.lineEdit.setText(_translate("MainWindow", "tyty", None)) |
|||
self.checkBox.setText(_translate("MainWindow", "CheckBox", None)) |
|||
self.radioButton.setText(_translate("MainWindow", "RadioButton", None)) |
|||
===Enable or disable a window=== <!--T:47--> |
|||
def on_checkBox_clicked(self): |
|||
if self.checkBox.checkState()==0: |
|||
App.Console.PrintMessage(str(self.checkBox.checkState())+" CheckBox KO\r\n") |
|||
else: |
|||
App.Console.PrintMessage(str(self.checkBox.checkState())+" CheckBox OK\r\n") |
|||
# App.Console.PrintMessage(str(self.lineEdit.setText("tititi"))+" LineEdit\r\n") #write text to the lineEdit window ! |
|||
# str(self.lineEdit.setText("tititi")) #écrit le texte dans la fenêtre lineEdit |
|||
App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit\r\n") |
|||
<!--T:81--> |
|||
def on_radioButton_clicked(self): |
|||
This script give the ability to manipulate the UI from the [[Python console]] to show/hide different components in the FreeCAD [[interface]] such as: |
|||
if self.radioButton.isChecked(): |
|||
* [[Report view]] |
|||
App.Console.PrintMessage(str(self.radioButton.isChecked())+" Radio OK\r\n") |
|||
* [[Tree view]] |
|||
else: |
|||
* [[Property editor|Property view]] |
|||
App.Console.PrintMessage(str(self.radioButton.isChecked())+" Radio KO\r\n") |
|||
* [[Selection view]] |
|||
* [[Combo view]] |
|||
* [[Python console]] |
|||
* draftToolbar |
|||
</translate> |
|||
{{Code|code= |
|||
from PySide import QtGui |
|||
mw = FreeCADGui.getMainWindow() |
|||
dws = mw.findChildren(QtGui.QDockWidget) |
|||
# objectName may be : |
|||
def on_lineEdit_clicked(self): |
|||
# "Report view" |
|||
# if self.lineEdit.textChanged(): |
|||
# "Tree view" |
|||
App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit Display\r\n") |
|||
# "Property view" |
|||
# "Selection view" |
|||
# "Combo View" |
|||
# "Python console" |
|||
# "draftToolbar" |
|||
for i in dws: |
|||
def on_pushButton_clicked(self): |
|||
if i.objectName() == "Report view": |
|||
App.Console.PrintMessage("Terminé\r\n") |
|||
dw = i |
|||
break |
|||
va = dw.toggleViewAction() |
|||
MainWindow = QtGui.QMainWindow() |
|||
va.setChecked(True) # True or False |
|||
ui = Ui_MainWindow(MainWindow) |
|||
dw.setVisible(True) # True or False |
|||
MainWindow.show() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:29--> |
|||
Here the same window but with an icon on each button. |
|||
</translate>{{Top}}<translate> |
|||
<!--T:50--> |
|||
Download associated icons (click right "Copy the image below ...)" |
|||
<!--T: |
===Open a custom webpage=== <!--T:27--> |
||
[[File:Icone01.png]] [[File:Icone02.png]] [[File:Icone03.png]] |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import WebGui |
|||
# -*- coding: utf-8 -*- |
|||
WebGui.openBrowser("http://www.example.com") |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
from PySide import QtCore, QtGui |
|||
===Get the HTML contents of an opened webpage=== <!--T:28--> |
|||
try: |
|||
_fromUtf8 = QtCore.QString.fromUtf8 |
|||
except AttributeError: |
|||
def _fromUtf8(s): |
|||
return s |
|||
</translate> |
|||
try: |
|||
{{Code|code= |
|||
_encoding = QtGui.QApplication.UnicodeUTF8 |
|||
from PySide import QtGui,QtWebKit |
|||
def _translate(context, text, disambig): |
|||
a = QtGui.qApp |
|||
return QtGui.QApplication.translate(context, text, disambig, _encoding) |
|||
mw = a.activeWindow() |
|||
except AttributeError: |
|||
v = mw.findChild(QtWebKit.QWebFrame) |
|||
def _translate(context, text, disambig): |
|||
html = unicode(v.toHtml()) |
|||
return QtGui.QApplication.translate(context, text, disambig) |
|||
print( html) |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
===Retrieve the coordinates of 3 selected points or objects=== <!--T:29--> |
|||
class Ui_MainWindow(object): |
|||
</translate> |
|||
def __init__(self, MainWindow): |
|||
{{Code|code= |
|||
self.window = MainWindow |
|||
# -*- coding: utf-8 -*- |
|||
path = FreeCAD.ConfigGet("UserAppData") |
|||
# the line above to put the accentuated in the remarks |
|||
# path = FreeCAD.ConfigGet("AppHomePath") |
|||
# If this line is missing, an error will be returned |
|||
# extract and use the coordinates of 3 objects selected |
|||
import Part, FreeCAD, math, PartGui, FreeCADGui |
|||
from FreeCAD import Base, Console |
|||
sel = FreeCADGui.Selection.getSelection() # " sel " contains the items selected |
|||
if len(sel)!=3 : |
|||
# If there are no 3 objects selected, an error is displayed in the report view |
|||
# The \r and \n at the end of line mean return and the newline CR + LF. |
|||
Console.PrintError("Select 3 points exactly\r\n") |
|||
else : |
|||
points=[] |
|||
for obj in sel: |
|||
points.append(obj.Shape.BoundBox.Center) |
|||
for pt in points: |
|||
MainWindow.setObjectName(_fromUtf8("MainWindow")) |
|||
# display of the coordinates in the report view |
|||
MainWindow.resize(400, 300) |
|||
Console.PrintMessage(str(pt.x)+"\r\n") |
|||
self.centralWidget = QtGui.QWidget(MainWindow) |
|||
Console.PrintMessage(str(pt.y)+"\r\n") |
|||
self.centralWidget.setObjectName(_fromUtf8("centralWidget")) |
|||
Console.PrintMessage(str(pt.z)+"\r\n") |
|||
Console.PrintMessage(str(pt[1]) + "\r\n") |
|||
self.pushButton = QtGui.QPushButton(self.centralWidget) |
|||
}} |
|||
self.pushButton.setGeometry(QtCore.QRect(30, 170, 93, 28)) |
|||
<translate> |
|||
self.pushButton.setObjectName(_fromUtf8("pushButton")) |
|||
self.pushButton.clicked.connect(self.on_pushButton_clicked) #connection pushButton |
|||
</translate>{{Top}}<translate> |
|||
self.lineEdit = QtGui.QLineEdit(self.centralWidget) |
|||
self.lineEdit.setGeometry(QtCore.QRect(30, 40, 211, 22)) |
|||
self.lineEdit.setObjectName(_fromUtf8("lineEdit")) |
|||
self.lineEdit.returnPressed.connect(self.on_lineEdit_clicked) #connection lineEdit |
|||
===List all objects=== <!--T:30--> |
|||
self.checkBox = QtGui.QCheckBox(self.centralWidget) |
|||
self.checkBox.setGeometry(QtCore.QRect(30, 90, 100, 20)) |
|||
self.checkBox.setChecked(True) |
|||
self.checkBox.setObjectName(_fromUtf8("checkBoxON")) |
|||
self.checkBox.clicked.connect(self.on_checkBox_clicked) #connection checkBox |
|||
</translate> |
|||
self.radioButton = QtGui.QRadioButton(self.centralWidget) |
|||
{{Code|code= |
|||
self.radioButton.setGeometry(QtCore.QRect(30, 130, 95, 20)) |
|||
# -*- coding: utf-8 -*- |
|||
self.radioButton.setObjectName(_fromUtf8("radioButton")) |
|||
import FreeCAD,Draft |
|||
self.radioButton.clicked.connect(self.on_radioButton_clicked) #connection radioButton |
|||
# List all objects of the document |
|||
doc = FreeCAD.ActiveDocument |
|||
objs = FreeCAD.ActiveDocument.Objects |
|||
#App.Console.PrintMessage(str(objs) + "\n") |
|||
#App.Console.PrintMessage(str(len(FreeCAD.ActiveDocument.Objects)) + " Objects" + "\n") |
|||
for obj in objs: |
|||
MainWindow.setCentralWidget(self.centralWidget) |
|||
a = obj.Name # list the Name of the object (not modifiable) |
|||
b = obj.Label # list the Label of the object (modifiable) |
|||
try: |
|||
c = obj.LabelText # list the LabeText of the text (modifiable) |
|||
App.Console.PrintMessage(str(a) +" "+ str(b) +" "+ str(c) + "\n") # Displays the Name the Label and the text |
|||
except: |
|||
App.Console.PrintMessage(str(a) +" "+ str(b) + "\n") # Displays the Name and the Label of the object |
|||
#doc.removeObject("Box") # Clears the designated object |
|||
self.menuBar = QtGui.QMenuBar(MainWindow) |
|||
}} |
|||
self.menuBar.setGeometry(QtCore.QRect(0, 0, 400, 26)) |
|||
<translate> |
|||
self.menuBar.setObjectName(_fromUtf8("menuBar")) |
|||
MainWindow.setMenuBar(self.menuBar) |
|||
</translate>{{Top}}<translate> |
|||
self.mainToolBar = QtGui.QToolBar(MainWindow) |
|||
self.mainToolBar.setObjectName(_fromUtf8("mainToolBar")) |
|||
MainWindow.addToolBar(QtCore.Qt.TopToolBarArea, self.mainToolBar) |
|||
===List the dimensions of an object, given its name=== <!--T:51--> |
|||
self.statusBar = QtGui.QStatusBar(MainWindow) |
|||
self.statusBar.setObjectName(_fromUtf8("statusBar")) |
|||
MainWindow.setStatusBar(self.statusBar) |
|||
</translate> |
|||
self.retranslateUi(MainWindow) |
|||
{{Code|code= |
|||
for edge in FreeCAD.ActiveDocument.MyObjectName.Shape.Edges: # replace "MyObjectName" for list |
|||
print( edge.Length) |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
# Affiche un icone sur le bouton PushButton |
|||
# self.image_01 = "C:\Program Files\FreeCAD0.13\Icone01.png" # adapt the icon name |
|||
self.image_01 = path+"Icone01.png" # adapt the name of the icon |
|||
icon01 = QtGui.QIcon() |
|||
icon01.addPixmap(QtGui.QPixmap(self.image_01),QtGui.QIcon.Normal, QtGui.QIcon.Off) |
|||
self.pushButton.setIcon(icon01) |
|||
self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button |
|||
===Function resident with the mouse click action=== <!--T:31--> |
|||
# Affiche un icone sur le bouton RadioButton |
|||
# self.image_02 = "C:\Program Files\FreeCAD0.13\Icone02.png" # adapt the name of the icon |
|||
self.image_02 = path+"Icone02.png" # adapter le nom de l'icone |
|||
icon02 = QtGui.QIcon() |
|||
icon02.addPixmap(QtGui.QPixmap(self.image_02),QtGui.QIcon.Normal, QtGui.QIcon.Off) |
|||
self.radioButton.setIcon(icon02) |
|||
# self.radioButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button |
|||
<!--T:75--> |
|||
# Affiche un icone sur le bouton CheckBox |
|||
Here with '''SelObserver''' on a object select |
|||
# self.image_03 = "C:\Program Files\FreeCAD0.13\Icone03.png" # the name of the icon |
|||
self.image_03 = path+"Icone03.png" # adapter le nom de l'icone |
|||
icon03 = QtGui.QIcon() |
|||
icon03.addPixmap(QtGui.QPixmap(self.image_03),QtGui.QIcon.Normal, QtGui.QIcon.Off) |
|||
self.checkBox.setIcon(icon03) |
|||
# self.checkBox.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button |
|||
</translate> |
|||
{{Code|code= |
|||
# -*- coding: utf-8 -*- |
|||
# causes an action to the mouse click on an object |
|||
# This function remains resident (in memory) with the function "addObserver(s)" |
|||
# "removeObserver(s) # Uninstalls the resident function |
|||
class SelObserver: |
|||
def setPreselection(self,doc,obj,sub): # Preselection object |
|||
App.Console.PrintMessage(str(sub)+ "\n") # The part of the object name |
|||
def addSelection(self,doc,obj,sub,pnt): # Selection object |
|||
App.Console.PrintMessage("addSelection"+ "\n") |
|||
App.Console.PrintMessage(str(doc)+ "\n") # Name of the document |
|||
self.pushButton.setText(_translate("MainWindow", "OK", None)) |
|||
App.Console.PrintMessage(str(obj)+ "\n") # Name of the object |
|||
self.lineEdit.setText(_translate("MainWindow", "tyty", None)) |
|||
App.Console.PrintMessage(str(sub)+ "\n") # The part of the object name |
|||
self.checkBox.setText(_translate("MainWindow", "CheckBox", None)) |
|||
App.Console.PrintMessage(str(pnt)+ "\n") # Coordinates of the object |
|||
self.radioButton.setText(_translate("MainWindow", "RadioButton", None)) |
|||
App.Console.PrintMessage("______"+ "\n") |
|||
def removeSelection(self,doc,obj,sub): # Remove the selection |
|||
def on_checkBox_clicked(self): |
|||
App.Console.PrintMessage("removeSelection"+ "\n") |
|||
if self.checkBox.checkState()==0: |
|||
App.Console.PrintMessage(str(self.checkBox.checkState())+" CheckBox KO\r\n") |
|||
else: |
|||
App.Console.PrintMessage(str(self.checkBox.checkState())+" CheckBox OK\r\n") |
|||
# App.Console.PrintMessage(str(self.lineEdit.setText("tititi"))+" LineEdit\r\n") # write text to the lineEdit window ! |
|||
# str(self.lineEdit.setText("tititi")) #écrit le texte dans la fenêtre lineEdit |
|||
App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit\r\n") |
|||
def setSelection(self,doc): # Set selection |
|||
def on_radioButton_clicked(self): |
|||
App.Console.PrintMessage("setSelection"+ "\n") |
|||
if self.radioButton.isChecked(): |
|||
App.Console.PrintMessage(str(self.radioButton.isChecked())+" Radio OK\r\n") |
|||
else: |
|||
App.Console.PrintMessage(str(self.radioButton.isChecked())+" Radio KO\r\n") |
|||
def clearSelection(self,doc): # If click on the screen, clear the selection |
|||
def on_lineEdit_clicked(self): |
|||
App.Console.PrintMessage("clearSelection"+ "\n") # If click on another object, clear the previous object |
|||
# if self.lineEdit.textChanged(): |
|||
s =SelObserver() |
|||
App.Console.PrintMessage(str(self.lineEdit.displayText())+" LineEdit Display\r\n") |
|||
FreeCADGui.Selection.addObserver(s) # install the function mode resident |
|||
#FreeCADGui.Selection.removeObserver(s) # Uninstall the resident function |
|||
def on_pushButton_clicked(self): |
|||
App.Console.PrintMessage("Terminé\r\n") |
|||
self.window.hide() |
|||
MainWindow = QtGui.QMainWindow() |
|||
ui = Ui_MainWindow(MainWindow) |
|||
MainWindow.show() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:30--> |
|||
<!--T:76--> |
|||
Here the code to display the icon on the '''pushButton''', change the name for another button, ('''radioButton, checkBox''') and the path to the icon. |
|||
Other example with '''ViewObserver''' on a object select or view |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
App.newDocument() |
|||
# Affiche un icône sur le bouton PushButton |
|||
v=Gui.activeDocument().activeView() |
|||
# self.image_01 = "C:\Program Files\FreeCAD0.13\icone01.png" # the name of the icon |
|||
self.image_01 = path+"icone01.png" # the name of the icon |
|||
#This class logs any mouse button events. As the registered callback function fires twice for 'down' and |
|||
icon01 = QtGui.QIcon() |
|||
#'up' events we need a boolean flag to handle this. |
|||
icon01.addPixmap(QtGui.QPixmap(self.image_01),QtGui.QIcon.Normal, QtGui.QIcon.Off) |
|||
class ViewObserver: |
|||
self.pushButton.setIcon(icon01) |
|||
def __init__(self, view): |
|||
self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button |
|||
self.view = view |
|||
def logPosition(self, info): |
|||
down = (info["State"] == "DOWN") |
|||
pos = info["Position"] |
|||
if (down): |
|||
FreeCAD.Console.PrintMessage("Clicked on position: ("+str(pos[0])+", "+str(pos[1])+")\n") |
|||
pnt = self.view.getPoint(pos) |
|||
FreeCAD.Console.PrintMessage("World coordinates: " + str(pnt) + "\n") |
|||
info = self.view.getObjectInfo(pos) |
|||
FreeCAD.Console.PrintMessage("Object info: " + str(info) + "\n") |
|||
o = ViewObserver(v) |
|||
c = v.addEventCallback("SoMouseButtonEvent",o.logPosition) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:31--> |
|||
</translate>{{Top}}<translate> |
|||
The command |
|||
'''UserAppData''' gives the user path |
|||
===Display the active document=== <!--T:163--> |
|||
'''AppHomePath''' gives the installation path of FreeCAD |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
class DocObserver: # document Observer |
|||
# path = FreeCAD.ConfigGet("UserAppData") |
|||
def slotActivateDocument(self,doc): |
|||
path = FreeCAD.ConfigGet("AppHomePath") |
|||
print(doc.Name) |
|||
obs=DocObserver() |
|||
App.addDocumentObserver(obs) |
|||
#App.removeDocumentObserver(obs) # desinstalle la fonction residente |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:32--> |
|||
<!--T:164--> |
|||
This command reverses the horizontal button, right to left. |
|||
To remove the observer call: |
|||
</translate> |
</translate> |
||
{{Code|code=App.removeDocumentObserver(obs) # desinstalle la fonction residente |
|||
{{Code|code= |
|||
self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button |
|||
}} |
}} |
||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
===Method 2=== <!--T:33--> |
|||
Another method to display a window, here by creating a file '''QtForm.py''' which contains the header program (module called with '''import QtForm'''), and a second module that contains the code window all these accessories, and your code (the calling module). |
|||
===Find/select all elements below the cursor=== <!--T:58--> |
|||
<!--T:34--> |
|||
This method requires two separate files, but allows to shorten your program using the file ' ' QtForm.py ' ' import. Then distribute the two files together, they are inseparable. |
|||
<!--T:35--> |
|||
The file '''QtForm.py''' |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
from pivy import coin |
|||
import FreeCADGui |
|||
def mouse_over_cb( event_callback): |
|||
# -*- coding: utf-8 -*- |
|||
event = event_callback.getEvent() |
|||
# Create by flachyjoe |
|||
pos = event.getPosition().getValue() |
|||
from PySide import QtCore, QtGui |
|||
listObjects = FreeCADGui.ActiveDocument.ActiveView.getObjectsInfo((int(pos[0]),int(pos[1]))) |
|||
obj = [] |
|||
if listObjects: |
|||
FreeCAD.Console.PrintMessage("\n *** Objects under mouse pointer ***") |
|||
for o in listObjects: |
|||
label = str(o["Object"]) |
|||
if not label in obj: |
|||
obj.append(label) |
|||
FreeCAD.Console.PrintMessage("\n"+str(obj)) |
|||
try: |
|||
_fromUtf8 = QtCore.QString.fromUtf8 |
|||
except AttributeError: |
|||
def _fromUtf8(s): |
|||
return s |
|||
view = FreeCADGui.ActiveDocument.ActiveView |
|||
try: |
|||
_encoding = QtGui.QApplication.UnicodeUTF8 |
|||
def _translate(context, text, disambig): |
|||
return QtGui.QApplication.translate(context, text, disambig, _encoding) |
|||
except AttributeError: |
|||
def _translate(context, text, disambig): |
|||
return QtGui.QApplication.translate(context, text, disambig) |
|||
mouse_over = view.addEventCallbackPivy( coin.SoLocation2Event.getClassTypeId(), mouse_over_cb ) |
|||
class Form(object): |
|||
def __init__(self, title, width, height): |
|||
self.window = QtGui.QMainWindow() |
|||
self.title=title |
|||
self.window.setObjectName(_fromUtf8(title)) |
|||
self.window.setWindowTitle(_translate(self.title, self.title, None)) |
|||
self.window.resize(width, height) |
|||
# to remove Callback : |
|||
def show(self): |
|||
#view.removeEventCallbackPivy( coin.SoLocation2Event.getClassTypeId(), mouse_over) |
|||
self.createUI() |
|||
self.retranslateUI() |
|||
#### |
|||
self.window.show() |
|||
#The easy way is probably to use FreeCAD's selection. |
|||
#FreeCADGui.ActiveDocument.ActiveView.getObjectsInfo(mouse_coords) |
|||
def setText(self, control, text): |
|||
control.setText(_translate(self.title, text, None)) |
|||
#### |
|||
#you get that kind of result : |
|||
#'Document': 'Unnamed', 'Object': 'Box', 'Component': 'Face2', 'y': 8.604081153869629, 'x': 21.0, 'z': 8.553047180175781 |
|||
#### |
|||
#You can use this data to add your element to FreeCAD's selection : |
|||
#FreeCADGui.Selection.addSelection(FreeCAD.ActiveDocument.Box,'Face2',21.0,8.604081153869629,8.553047180175781) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:36--> |
|||
The calling file that contains the window and your code. |
|||
</translate>{{Top}}<translate> |
|||
<!--T:37--> |
|||
The file my_file.py |
|||
</translate><div class="mw-collapsible mw-collapsed toccolours"><translate> |
|||
===List the components of an object=== <!--T:32--> |
|||
<!--T:82--> |
|||
This function list the components of an object and extracts: |
|||
* this object its XYZ coordinates, |
|||
* its edges and their lengths center of mass and coordinates |
|||
* its faces and their center of mass |
|||
* its faces and their surfaces and coordinates |
|||
</translate><div class="mw-collapsible-content"><translate> |
|||
<!--T:38--> |
|||
The connections are to do, a good exercise. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
# -*- coding: utf-8 -*- |
# -*- coding: utf-8 -*- |
||
# This function list the components of an object |
|||
# Create by flachyjoe |
|||
# and extract this object its XYZ coordinates, |
|||
from PySide import QtCore, QtGui |
|||
# its edges and their lengths center of mass and coordinates |
|||
import QtForm |
|||
# its faces and their center of mass |
|||
# its faces and their surfaces and coordinates |
|||
# 8/05/2014 |
|||
import Draft,Part |
|||
class myForm(QtForm.Form): |
|||
def detail(): |
|||
sel = FreeCADGui.Selection.getSelection() # Select an object |
|||
self.centralWidget = QtGui.QWidget(self.window) |
|||
if len(sel) != 0: # If there is a selection then |
|||
self.window.setCentralWidget(self.centralWidget) |
|||
Vertx=[] |
|||
Edges=[] |
|||
self.pushButton = QtGui.QPushButton(self.centralWidget) |
|||
Faces=[] |
|||
self.pushButton.setGeometry(QtCore.QRect(30, 170, 93, 28)) |
|||
compt_V=0 |
|||
self.pushButton.clicked.connect(self.on_pushButton_clicked) |
|||
compt_E=0 |
|||
compt_F=0 |
|||
self.lineEdit = QtGui.QLineEdit(self.centralWidget) |
|||
pas =0 |
|||
self.lineEdit.setGeometry(QtCore.QRect(30, 40, 211, 22)) |
|||
perimetre = 0.0 |
|||
EdgesLong = [] |
|||
self.checkBox = QtGui.QCheckBox(self.centralWidget) |
|||
self.checkBox.setGeometry(QtCore.QRect(30, 90, 81, 20)) |
|||
# Displays the "Name" and the "Label" of the selection |
|||
self.checkBox.setChecked(True) |
|||
App.Console.PrintMessage("Selection > " + str(sel[0].Name) + " " + str(sel[0].Label) +"\n"+"\n") |
|||
self.radioButton = QtGui.QRadioButton(self.centralWidget) |
|||
for j in enumerate(sel[0].Shape.Edges): # Search the "Edges" and their lengths |
|||
self.radioButton.setGeometry(QtCore.QRect(30, 130, 95, 20)) |
|||
compt_E+=1 |
|||
Edges.append("Edge%d" % (j[0]+1)) |
|||
def retranslateUI(self): |
|||
EdgesLong.append(str(sel[0].Shape.Edges[compt_E-1].Length)) |
|||
self.setText(self.pushButton, "Fermer") |
|||
perimetre += (sel[0].Shape.Edges[compt_E-1].Length) # calculates the perimeter |
|||
self.setText(self.lineEdit, "essai de texte") |
|||
self.setText(self.checkBox, "CheckBox") |
|||
# Displays the "Edge" and its length |
|||
self.setText(self.radioButton, "RadioButton") |
|||
App.Console.PrintMessage("Edge"+str(compt_E)+" Length > "+str(sel[0].Shape.Edges[compt_E-1].Length)+"\n") |
|||
def on_pushButton_clicked(self): |
|||
# Displays the "Edge" and its center mass |
|||
self.window.hide() |
|||
App.Console.PrintMessage("Edge"+str(compt_E)+" Center > "+str(sel[0].Shape.Edges[compt_E-1].CenterOfMass)+"\n") |
|||
num = sel[0].Shape.Edges[compt_E-1].Vertexes[0] |
|||
Vertx.append("X1: "+str(num.Point.x)) |
|||
Vertx.append("Y1: "+str(num.Point.y)) |
|||
Vertx.append("Z1: "+str(num.Point.z)) |
|||
# Displays the coordinates 1 |
|||
App.Console.PrintMessage("X1: "+str(num.Point[0])+" Y1: "+str(num.Point[1])+" Z1: "+str(num.Point[2])+"\n") |
|||
try: |
|||
num = sel[0].Shape.Edges[compt_E-1].Vertexes[1] |
|||
Vertx.append("X2: "+str(num.Point.x)) |
|||
Vertx.append("Y2: "+str(num.Point.y)) |
|||
Vertx.append("Z2: "+str(num.Point.z)) |
|||
except: |
|||
Vertx.append("-") |
|||
Vertx.append("-") |
|||
Vertx.append("-") |
|||
# Displays the coordinates 2 |
|||
App.Console.PrintMessage("X2: "+str(num.Point[0])+" Y2: "+str(num.Point[1])+" Z2: "+str(num.Point[2])+"\n") |
|||
App.Console.PrintMessage("\n") |
|||
App.Console.PrintMessage("Perimeter of the form : "+str(perimetre)+"\n") |
|||
App.Console.PrintMessage("\n") |
|||
FacesSurf = [] |
|||
for j in enumerate(sel[0].Shape.Faces): # Search the "Faces" and their surface |
|||
compt_F+=1 |
|||
Faces.append("Face%d" % (j[0]+1)) |
|||
FacesSurf.append(str(sel[0].Shape.Faces[compt_F-1].Area)) |
|||
# Displays 'Face' and its surface |
|||
App.Console.PrintMessage("Face"+str(compt_F)+" > Surface "+str(sel[0].Shape.Faces[compt_F-1].Area)+"\n") |
|||
# Displays 'Face' and its CenterOfMass |
|||
App.Console.PrintMessage("Face"+str(compt_F)+" > Center "+str(sel[0].Shape.Faces[compt_F-1].CenterOfMass)+"\n") |
|||
# Displays 'Face' and its Coordinates |
|||
FacesCoor = [] |
|||
fco = 0 |
|||
for f0 in sel[0].Shape.Faces[compt_F-1].Vertexes: # Search the Vertexes of the face |
|||
fco += 1 |
|||
FacesCoor.append("X"+str(fco)+": "+str(f0.Point.x)) |
|||
FacesCoor.append("Y"+str(fco)+": "+str(f0.Point.y)) |
|||
FacesCoor.append("Z"+str(fco)+": "+str(f0.Point.z)) |
|||
# Displays 'Face' and its Coordinates |
|||
App.Console.PrintMessage("Face"+str(compt_F)+" > Coordinate"+str(FacesCoor)+"\n") |
|||
# Displays 'Face' and its Volume |
|||
App.Console.PrintMessage("Face"+str(compt_F)+" > Volume "+str(sel[0].Shape.Faces[compt_F-1].Volume)+"\n") |
|||
App.Console.PrintMessage("\n") |
|||
# Displays the total surface of the form |
|||
App.Console.PrintMessage("Surface of the form : "+str(sel[0].Shape.Area)+"\n") |
|||
# Displays the total Volume of the form |
|||
App.Console.PrintMessage("Volume of the form : "+str(sel[0].Shape.Volume)+"\n") |
|||
detail() |
|||
myWindow=myForm("Fenetre de test",400,300) |
|||
myWindow.show() |
|||
}} |
}} |
||
</div> <!-- End of collapsible div --> |
|||
</div> <!-- End of collapsible div --> |
|||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
<!--T:52--> |
|||
'''Other example''' |
|||
<center> |
|||
<gallery widths="400" heights="200"> |
|||
Image:Qt_Example_00.png|Qt example 1 |
|||
Image:Qt_Example_01.png|Qt example details |
|||
</gallery> |
|||
</center> |
|||
{{clear}} |
|||
<!--T: |
===List the PropertiesList=== <!--T:33--> |
||
Are treated : |
|||
<!--T:54--> |
|||
# icon for window |
|||
# horizontalSlider |
|||
# progressBar horizontal |
|||
# verticalSlider |
|||
# progressBar vertical |
|||
# lineEdit |
|||
# lineEdit |
|||
# doubleSpinBox |
|||
# doubleSpinBox |
|||
# doubleSpinBox |
|||
# button |
|||
# button |
|||
# radioButton with icons |
|||
# checkBox with icon checked and unchecked |
|||
# textEdit |
|||
# graphicsView with 2 graphes |
|||
The code page and the icons [[Qt_Example|Qt_Example]] |
|||
</translate> |
</translate> |
||
{{Code|code= |
|||
import FreeCADGui |
|||
from FreeCAD import Console |
|||
o = App.ActiveDocument.ActiveObject |
|||
op = o.PropertiesList |
|||
for p in op: |
|||
Console.PrintMessage("Property: "+ str(p)+ " Value: " + str(o.getPropertyByName(p))+"\r\n") |
|||
}} |
|||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
==Icon personalised in ComboView== <!--T:64--> |
|||
<!--T:65--> |
|||
Here an example to create an object with properties and icon personalised in ComboView |
|||
===Add a single Property Comment=== <!--T:54--> |
|||
<!--T:66--> |
|||
Download the example icon to the same directory as the macro [[File:FreeCADIco.png|icon Example for the macro|24px]] |
|||
<!--T:67--> |
|||
Use of an icon for three different use cases: icon_in_file_disk (format .png), icon_XPM_in_macro (format .XPM) and icon_resource_FreeCAD |
|||
</translate> |
</translate> |
||
[[File:Qt_Example_02.png|icon personalised]] |
|||
{{clear}} |
|||
{{Code|code= |
{{Code|code= |
||
import PySide |
|||
import FreeCAD, FreeCADGui, Part |
|||
from pivy import coin |
|||
from PySide import QtGui ,QtCore |
|||
from PySide.QtGui import * |
|||
from PySide.QtCore import * |
|||
import Draft |
import Draft |
||
obj = FreeCADGui.Selection.getSelection()[0] |
|||
obj.addProperty("App::PropertyString","GComment","Draft","Font name").GComment = "Comment here" |
|||
App.activeDocument().recompute() |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
global path |
|||
param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")# macro path in FreeCAD preferences |
|||
path = param.GetString("MacroPath","") + "/" # macro path |
|||
path = path.replace("\\","/") # convert the "\" to "/" |
|||
<!--T:83--> |
|||
<div class="mw-collapsible mw-collapsed toccolours"> |
|||
===Search and data extraction=== <!--T:36--> |
|||
class IconViewProviderToFile: # Class ViewProvider create Property view of object |
|||
def __init__( self, obj, icon): |
|||
self.icone = icon |
|||
def getIcon(self): # GetIcon |
|||
return self.icone |
|||
def attach(self, obj): # Property view of object |
|||
self.modes = [] |
|||
self.modes.append("Flat Lines") |
|||
self.modes.append("Shaded") |
|||
self.modes.append("Wireframe") |
|||
self.modes.append("Points") |
|||
obj.addDisplayMode( coin.SoGroup(),"Flat Lines" ) # Display Mode |
|||
obj.addDisplayMode( coin.SoGroup(),"Shaded" ) |
|||
obj.addDisplayMode( coin.SoGroup(),"Wireframe" ) |
|||
obj.addDisplayMode( coin.SoGroup(),"Points" ) |
|||
return self.modes |
|||
<!--T:37--> |
|||
def getDisplayModes(self,obj): |
|||
Examples of research and decoding information on an object. |
|||
return self.modes |
|||
<!--T:38--> |
|||
##################################################### |
|||
Each section is independently and is separated by "############" can be copied directly into the Python console, or in a macro or use this macro. The description of the macro in the commentary. |
|||
########## Example with icon to file # begin ######## |
|||
##################################################### |
|||
<!--T:39--> |
|||
object1 = FreeCAD.ActiveDocument.addObject("App::FeaturePython", "Icon_In_File_Disk") # create your object |
|||
Displaying it in the "Report View" window (View > Views > Report view) |
|||
object1.addProperty("App::PropertyString","Identity", "ExampleTitle0", "Identity of object").Identity = "FCSpring" # Identity of object |
|||
object1.addProperty("App::PropertyFloat" ,"Pitch", "ExampleTitle0", "Pitch betwen 2 heads").Pitch = 2.0 # other Property Data |
|||
<!--T:84--> |
|||
object1.addProperty("App::PropertyBool" ,"View", "ExampleTitle1", "Hello world").View = True # ... |
|||
<div class="mw-collapsible-content"> |
|||
object1.addProperty("App::PropertyColor" ,"LineColor","ExampleTitle2", "Color to choice").LineColor = (0.13,0.15,0.37) # ... |
|||
#...other Property Data |
|||
</translate> |
|||
#...other Property Data |
|||
{{Code|code= |
|||
# -*- coding: utf-8 -*- |
|||
from __future__ import unicode_literals |
|||
# Exemples de recherche et de decodage d'informations sur un objet |
|||
# Chaque section peut etre copiee directement dans la console Python ou dans une macro ou utilisez la macro tel quel |
|||
# Certaines commandes se repetent seul l'approche est differente |
|||
# L'affichage se fait dans la Vue rapport : Menu Affichage > Vues > Vue rapport |
|||
# |
# |
||
# Examples of research and decoding information on an object |
|||
object1.ViewObject.Proxy = IconViewProviderToFile( object1, path + "FreeCADIco.png") # icon download to file |
|||
# Each section can be copied directly into the Python console, or in a macro or uses this macro |
|||
App.ActiveDocument.recompute() |
|||
# Certain commands as repeat alone approach is different |
|||
# |
|||
# Displayed in Report view: View > Views > report view |
|||
#__Detail__: |
|||
# FreeCAD.ActiveDocument.addObject( = create now object personalized |
|||
# "App::FeaturePython", = object as FeaturePython |
|||
# "Icon_In_File_Disk") = internal name of your object |
|||
# |
# |
||
# rev:30/08/2014:29/09/2014:17/09/2015 22/11/2019 30/12/2022 |
|||
from FreeCAD import Base |
|||
import DraftVecUtils, Draft, Part |
|||
################################################################################## |
|||
# info in the object |
|||
box = App.ActiveDocument.getObject('Box') # object |
|||
#### |
|||
print(dir(box)) # all options disponible in the object |
|||
#### |
|||
print(box.Name) # object name |
|||
#### |
|||
print(box.Content) # content of the object in XML format |
|||
################################################################################## |
|||
# |
# |
||
# example of using the information listed |
|||
# "App::PropertyString", = type of Property , availlable : PropertyString, PropertyFloat, PropertyBool, PropertyColor |
|||
# "Identity", = name of the feature |
|||
# "ExampleTitle0", = title of the "section" |
|||
# "Identity of object") = tooltip displayed on mouse |
|||
# .Identity = variable (same of name of the feature) |
|||
# object1.ViewObject.Proxy = create the view object and gives the icon |
|||
# |
# |
||
# search the name of the active document |
|||
########## example with icon to file end |
|||
mydoc = FreeCAD.activeDocument().Name # Name of active Document |
|||
App.Console.PrintMessage("Active docu : "+(mydoc)+"\n") |
|||
################################################################################## |
|||
# search the document name and the name of the object selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
object_FullName = sel[0].FullName # file Name and Name of the object selected |
|||
App.Console.PrintMessage("object_FullName: "+(object_FullName)+"\n") |
|||
################################################################################## |
|||
# search the label of the object selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
object_Label = sel[0].Label # Label of the object (modifiable) |
|||
App.Console.PrintMessage("object_Label : "+(object_Label)+"\n") |
|||
################################################################################## |
|||
#TypeID object FreeCAD selected |
|||
##################################################### |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
########## Example with icon in macro # begin ####### |
|||
App.Console.PrintMessage("sel : "+str(sel[0])+"\n\n") # sel[0] first object selected |
|||
##################################################### |
|||
################################################################################## |
|||
# search the Name of the object selected |
|||
def setIconInMacro(self): # def contener the icon in format .xpm |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
# File format XPM created by Gimp "https://www.gimp.org/" |
|||
object_Name = sel[0].Name # Name of the object (not modifiable) |
|||
# Choice palette Tango |
|||
App.Console.PrintMessage("object_Name : "+str(object_Name)+"\n\n") |
|||
# Create your masterwork ... |
|||
################################################################################## |
|||
# For export the image in XPM format |
|||
# Menu File > Export as > .xpm |
|||
# (For convert image true color in Tango color palette : |
|||
# Menu Image > Mode > Indexed ... > Use custom palette > Tango Icon Theme > Convert) |
|||
return """ |
|||
/* XPM */ |
|||
static char * XPM[] = { |
|||
"22 24 5 1", |
|||
" c None", |
|||
". c #CE5C00", |
|||
"+ c #EDD400", |
|||
"@ c #F57900", |
|||
"# c #8F5902", |
|||
" ", |
|||
" ", |
|||
" .... ", |
|||
" ..@@@@.. ", |
|||
" . ...@...... ", |
|||
" .+++++++++... ", |
|||
" . ....++... ", |
|||
" .@..@@@@@@.+++++.. ", |
|||
" .@@@@@..# ++++ .. ", |
|||
" . ++++ .@.. ", |
|||
" .++++++++ .@@@.+. ", |
|||
" . ..@@@@@. ++. ", |
|||
" ..@@@@@@@@@. +++ . ", |
|||
" ....@...# +++++ @.. ", |
|||
" . ++++++++ .@. . ", |
|||
" .++++++++ .@@@@ . ", |
|||
" . #....@@@@. ++. ", |
|||
" .@@@@@@@@@.. +++ . ", |
|||
" ........ +++++... ", |
|||
" ... ..+++++ ..@.. ", |
|||
" ...... .@@@ +. ", |
|||
" ......++. ", |
|||
" ... ", |
|||
" "}; |
|||
""" |
|||
# search the Sub Element Name of the sub object selected |
|||
object2 = FreeCAD.ActiveDocument.addObject("App::FeaturePython", "Icon_XPM_In_Macro") # |
|||
try: |
|||
object2.addProperty("App::PropertyString","Identity","ExampleTitle","Identity of object").Identity = "FCSpring" |
|||
SubElement = FreeCADGui.Selection.getSelectionEx() # sub element name with getSelectionEx() |
|||
#...other Property Data |
|||
element_ = SubElement[0].SubElementNames[0] # name of 1 element selected |
|||
#...other Property Data |
|||
App.Console.PrintMessage("elementSelec : "+str(element_)+"\n\n") |
|||
# |
|||
except: |
|||
object2.ViewObject.Proxy = IconViewProviderToFile( object2, setIconInMacro("")) # icon in macro (.XPM) |
|||
App.Console.PrintMessage("Oups"+"\n\n") |
|||
App.ActiveDocument.recompute() |
|||
################################################################################## |
|||
########## example with icon in macro end |
|||
# give the length of the subObject selected |
|||
SubElementLength = Gui.Selection.getSelectionEx()[0].SubObjects[0].Length # sub element or element name with getSelectionEx() |
|||
App.Console.PrintMessage("SubElement length: "+str(SubElementLength)+"\n")# length |
|||
################################################################################## |
|||
# list the edges and the coordinates of the object[0] selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
i = 0 |
|||
for j in enumerate(sel[0].Shape.Edges): # list all Edges |
|||
i += 1 |
|||
App.Console.PrintMessage("Edges n : "+str(i)+"\n") |
|||
a = sel[0].Shape.Edges[j[0]].Vertexes[0] |
|||
App.Console.PrintMessage("X1 : "+str(a.Point.x)+"\n") # coordinate XYZ first point |
|||
App.Console.PrintMessage("Y1 : "+str(a.Point.y)+"\n") # |
|||
App.Console.PrintMessage("Z1 : "+str(a.Point.z)+"\n") # |
|||
try: |
|||
a = sel[0].Shape.Edges[j[0]].Vertexes[1] |
|||
App.Console.PrintMessage("X2 : "+str(a.Point.x)+"\n") # coordinate XYZ second point |
|||
App.Console.PrintMessage("Y2 : "+str(a.Point.y)+"\n") # |
|||
App.Console.PrintMessage("Z2 : "+str(a.Point.z)+"\n") # |
|||
except: |
|||
App.Console.PrintMessage("Oups"+"\n") |
|||
App.Console.PrintMessage("\n") |
|||
################################################################################## |
|||
# give the sub element name, length, coordinates, BoundBox, BoundBox.Center, Area of the SubObjects selected |
|||
#################################################################### |
|||
try: |
|||
########## Example with icon to FreeCAD ressource # begin ########## |
|||
SubElement = FreeCADGui.Selection.getSelectionEx() # sub element name with getSelectionEx() |
|||
#################################################################### |
|||
subElementName = Gui.Selection.getSelectionEx()[0].SubElementNames[0] # sub element name with getSelectionEx() |
|||
App.Console.PrintMessage("subElementName : "+str(subElementName)+"\n") |
|||
subObjectLength = Gui.Selection.getSelectionEx()[0].SubObjects[0].Length # sub element Length |
|||
App.Console.PrintMessage("subObjectLength: "+str(subObjectLength)+"\n\n") |
|||
subObjectX1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.x # sub element coordinate X1 |
|||
App.Console.PrintMessage("subObject_X1 : "+str(subObjectX1)+"\n") |
|||
subObjectY1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.y # sub element coordinate Y1 |
|||
App.Console.PrintMessage("subObject_Y1 : "+str(subObjectY1)+"\n") |
|||
subObjectZ1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.z # sub element coordinate Z1 |
|||
App.Console.PrintMessage("subObject_Z1 : "+str(subObjectZ1)+"\n\n") |
|||
try: |
|||
object3 = FreeCAD.ActiveDocument.addObject("App::FeaturePython", "Icon_Ressource_FreeCAD") # |
|||
subObjectX2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.x # sub element coordinate X2 |
|||
object3.addProperty("App::PropertyString","Identity","ExampleTitle","Identity of object").Identity = "FCSpring" |
|||
App.Console.PrintMessage("subObject_X2 : "+str(subObjectX2)+"\n") |
|||
#...other Property Data |
|||
subObjectY2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.y # sub element coordinate Y2 |
|||
#...other Property Data |
|||
App.Console.PrintMessage("subObject_Y2 : "+str(subObjectY2)+"\n") |
|||
# |
|||
subObjectZ2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.z # sub element coordinate Z2 |
|||
object3.ViewObject.Proxy = IconViewProviderToFile( object3, ":/icons/Draft_Draft.svg") # icon to FreeCAD ressource |
|||
App.Console.PrintMessage("subObject_Z2 : "+str(subObjectZ2)+"\n\n") |
|||
App.ActiveDocument.recompute() |
|||
except: |
|||
########## example with icon to FreeCAD ressource end |
|||
App.Console.PrintMessage("Oups"+"\n\n") |
|||
subObjectBoundBox = Gui.Selection.getSelectionEx()[0].SubObjects[0].BoundBox # sub element BoundBox coordinates |
|||
}} |
|||
App.Console.PrintMessage("subObjectBBox : "+str(subObjectBoundBox)+"\n") |
|||
subObjectBoundBoxCenter = Gui.Selection.getSelectionEx()[0].SubObjects[0].BoundBox.Center # sub element BoundBoxCenter |
|||
App.Console.PrintMessage("subObjectBBoxCe: "+str(subObjectBoundBoxCenter)+"\n") |
|||
surfaceFace = Gui.Selection.getSelectionEx()[0].SubObjects[0].Area # Area of the face selected |
|||
App.Console.PrintMessage("surfaceFace : "+str(surfaceFace)+"\n\n") |
|||
except: |
|||
App.Console.PrintMessage("Oups"+"\n\n") |
|||
################################################################################## |
|||
# give the area of the object |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
surface = sel[0].Shape.Area # Area object complete |
|||
App.Console.PrintMessage("surfaceObjet : "+str(surface)+"\n\n") |
|||
################################################################################## |
|||
# give the Center Of Mass and coordinates of the object |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
CenterOfMass = sel[0].Shape.CenterOfMass # Center of Mass of the object |
|||
App.Console.PrintMessage("CenterOfMass : "+str(CenterOfMass)+"\n") |
|||
App.Console.PrintMessage("CenterOfMassX : "+str(CenterOfMass[0])+"\n") # coordinates [0]=X [1]=Y [2]=Z |
|||
App.Console.PrintMessage("CenterOfMassY : "+str(CenterOfMass[1])+"\n") # or CenterOfMass.x, CenterOfMass.y, CenterOfMass.z |
|||
App.Console.PrintMessage("CenterOfMassZ : "+str(CenterOfMass[2])+"\n\n") |
|||
################################################################################## |
|||
# list the all faces of the object selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
for j in enumerate(sel[0].Shape.Faces): # List alles faces of the object |
|||
App.Console.PrintMessage("Face : "+str("Face%d" % (j[0]+1))+"\n") |
|||
App.Console.PrintMessage("\n\n") |
|||
################################################################################## |
|||
# give the volume of the object selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
volume_ = sel[0].Shape.Volume # Volume of the object |
|||
App.Console.PrintMessage("volume_ : "+str(volume_)+"\n\n") |
|||
################################################################################## |
|||
# give the BoundBox of the oject selected all type |
|||
objs = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
if len(objs) >= 1: # serch the object type |
|||
if hasattr(objs[0], "Shape"): |
|||
s = objs[0].Shape |
|||
elif hasattr(objs[0], "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331 |
|||
s = objs[0].Mesh |
|||
elif hasattr(objs[0], "Points"): |
|||
s = objs[0].Points |
|||
boundBox_= s.BoundBox # BoundBox of the object |
|||
App.Console.PrintMessage("boundBox_ : "+str(boundBox_)+"\n") # |
|||
boundBoxLX = boundBox_.XLength # Length x boundBox rectangle |
|||
boundBoxLY = boundBox_.YLength # Length y boundBox rectangle |
|||
boundBoxLZ = boundBox_.ZLength # Length z boundBox rectangle |
|||
boundBoxXMin = boundBox_.XMin # coordonate XMin |
|||
boundBoxYMin = boundBox_.YMin # coordonate YMin |
|||
boundBoxZMin = boundBox_.ZMin # coordonate ZMin |
|||
boundBoxXMax = boundBox_.XMax # coordonate XMax |
|||
boundBoxYMax = boundBox_.YMax # coordonate YMax |
|||
boundBoxZMax = boundBox_.ZMax # coordonate ZMax |
|||
boundBoxDiag= boundBox_.DiagonalLength # Diagonal Length boundBox rectangle |
|||
boundBoxCenter = boundBox_.Center # BoundBox Center |
|||
boundBoxCenterOfGravity = boundBox_.CenterOfGravity # BoundBox CenterOfGravity |
|||
App.Console.PrintMessage("boundBoxLX : "+str(boundBoxLX)+"\n") |
|||
App.Console.PrintMessage("boundBoxLY : "+str(boundBoxLY)+"\n") |
|||
App.Console.PrintMessage("boundBoxLZ : "+str(boundBoxLZ)+"\n\n") |
|||
App.Console.PrintMessage("boundBoxXMin : "+str(boundBoxXMin)+"\n") |
|||
App.Console.PrintMessage("boundBoxYMin : "+str(boundBoxYMin)+"\n") |
|||
App.Console.PrintMessage("boundBoxZMin : "+str(boundBoxZMin)+"\n") |
|||
App.Console.PrintMessage("boundBoxXMax : "+str(boundBoxXMax)+"\n") |
|||
App.Console.PrintMessage("boundBoxYMax : "+str(boundBoxYMax)+"\n") |
|||
App.Console.PrintMessage("boundBoxZMax : "+str(boundBoxZMax)+"\n\n") |
|||
App.Console.PrintMessage("boundBoxDiag : "+str(boundBoxDiag)+"\n") |
|||
App.Console.PrintMessage("boundBoxCenter : "+str(boundBoxCenter)+"\n") |
|||
App.Console.PrintMessage("boundBox Center of Gravity : "+str(boundBoxCenterOfGravity )+"\n\n") |
|||
################################################################################## |
|||
# give the complete placement of the object selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
pl = sel[0].Shape.Placement # Placement Vector XYZ and Yaw-Pitch-Roll |
|||
App.Console.PrintMessage("Placement : "+str(pl)+"\n") |
|||
################################################################################## |
|||
# give the placement Base (xyz) of the object selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
pl = sel[0].Shape.Placement.Base # Placement Vector XYZ |
|||
App.Console.PrintMessage("PlacementBase : "+str(pl)+"\n\n") |
|||
################################################################################## |
|||
# give the placement Base (xyz) of the object selected |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
oripl_X = sel[0].Placement.Base[0] # decode Placement X |
|||
oripl_Y = sel[0].Placement.Base[1] # decode Placement Y |
|||
oripl_Z = sel[0].Placement.Base[2] # decode Placement Z |
|||
# same |
|||
#oripl_X = sel[0].Placement.Base.x # decode Placement X |
|||
#oripl_Y = sel[0].Placement.Base.y # decode Placement Y |
|||
#oripl_Z = sel[0].Placement.Base.z # decode Placement Z |
|||
App.Console.PrintMessage("oripl_X : "+str(oripl_X)+"\n") |
|||
App.Console.PrintMessage("oripl_Y : "+str(oripl_Y)+"\n") |
|||
App.Console.PrintMessage("oripl_Z : "+str(oripl_Z)+"\n\n") |
|||
################################################################################## |
|||
# give the placement rotation of the object selected (x, y, z, angle rotation) |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
rotation = sel[0].Placement.Rotation # decode Placement Rotation |
|||
App.Console.PrintMessage("rotation : "+str(rotation)+"\n\n") |
|||
################################################################################## |
|||
# give the placement rotation of the object selected (x, y, z, angle rotation) |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
pl = sel[0].Shape.Placement.Rotation # decode Placement Rotation other method |
|||
App.Console.PrintMessage("Placement Rot : "+str(pl)+"\n\n") |
|||
################################################################################## |
|||
# give the rotation of the object selected (angle rotation) |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
pl = sel[0].Shape.Placement.Rotation.Angle # decode Placement Rotation Angle |
|||
App.Console.PrintMessage("Placement Rot Angle : "+str(pl)+"\n\n") |
|||
################################################################################## |
|||
# give the rotation.Q of the object selected (angle rotation in Radian) for convert: math.degrees(angleInRadian) |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
Rot = sel[0].Placement.Rotation.Q # Placement Rotation Q |
|||
App.Console.PrintMessage("Rot : "+str(Rot)+ "\n") |
|||
Rot_0 = sel[0].Placement.Rotation.Q[0] # decode Placement Rotation Q |
|||
App.Console.PrintMessage("Rot_0 : "+str(Rot_0)+ " rad , "+str(180 * Rot_0 / 3.1416)+" deg "+"\n") # or math.degrees(angle) |
|||
Rot_1 = sel[0].Placement.Rotation.Q[1] # decode Placement Rotation 1 |
|||
App.Console.PrintMessage("Rot_1 : "+str(Rot_1)+ " rad , "+str(180 * Rot_1 / 3.1416)+" deg "+"\n") # or math.degrees(angle) |
|||
Rot_2 = sel[0].Placement.Rotation.Q[2] # decode Placement Rotation 2 |
|||
App.Console.PrintMessage("Rot_2 : "+str(Rot_2)+ " rad , "+str(180 * Rot_2 / 3.1416)+" deg "+"\n") # or math.degrees(angle) |
|||
Rot_3 = sel[0].Placement.Rotation.Q[3] # decode Placement Rotation 3 |
|||
App.Console.PrintMessage("Rot_3 : "+str(Rot_3)+"\n\n") |
|||
Rot_Axis = sel[0].Placement.Rotation.Axis # Placement Rotation .Axis |
|||
App.Console.PrintMessage("Rot_Axis : "+str(Rot_Axis)+ "\n") |
|||
Rot_Angle = sel[0].Placement.Rotation.Angle # Placement Rotation .Angle |
|||
App.Console.PrintMessage("Rot_Angle : "+str(Rot_Angle)+ "\n\n") |
|||
################################################################################## |
|||
# give the rotation of the object selected toEuler (angle rotation in degrees) |
|||
sel = FreeCADGui.Selection.getSelection() # select object with getSelection() |
|||
angle = sel[0].Shape.Placement.Rotation.toEuler() # angle Euler |
|||
App.Console.PrintMessage("Angle : "+str(angle)+"\n") |
|||
Yaw = sel[0].Shape.Placement.Rotation.toEuler()[0] # decode angle Euler Yaw (Z) lacet (alpha) |
|||
App.Console.PrintMessage("Yaw : "+str(Yaw)+"\n") |
|||
Pitch = sel[0].Shape.Placement.Rotation.toEuler()[1] # decode angle Euler Pitch (Y) tangage (beta) |
|||
App.Console.PrintMessage("Pitch : "+str(Pitch)+"\n") |
|||
Roll = sel[0].Shape.Placement.Rotation.toEuler()[2] # decode angle Euler Roll (X) roulis (gamma) |
|||
App.Console.PrintMessage("Roll : "+str(Roll)+"\n\n") |
|||
rot = App.Rotation() |
|||
rot.setYawPitchRoll(45,45,0) |
|||
print("Angle: ", rot.Angle) |
|||
print("Axis: ", rot.Axis) |
|||
print("RawAxis: ", rot.RawAxis) |
|||
print("YawPitchRoll: ", rot.getYawPitchRoll()) |
|||
print("Rotation: ", rot) |
|||
print("Quaternion: ", rot.Q) |
|||
################################################################################## |
|||
# find Midpoint of the selected line |
|||
import Draft, DraftGeomUtils |
|||
sel = FreeCADGui.Selection.getSelection() |
|||
vecteur = DraftGeomUtils.findMidpoint(sel[0].Shape.Edges[0]) # find Midpoint |
|||
App.Console.PrintMessage(vecteur) |
|||
Draft.makePoint(vecteur) |
|||
################################################################################## |
|||
}} |
|||
</div> <!-- End of collapsible div --> |
|||
</div> <!-- End of collapsible div --> |
|||
<translate> |
<translate> |
||
<!--T:68--> |
|||
Complete example creating a cube and its icon |
|||
</translate> |
|||
</translate>{{Top}}<translate> |
|||
===Manual search of an element with label=== <!--T:52--> |
|||
</translate> |
|||
{{Code|code= |
{{Code|code= |
||
# Extract the coordinate X,Y,Z and Angle giving the label (here "Cylindre") |
|||
#https://forum.freecadweb.org/viewtopic.php?t=10255#p83319 |
|||
App.Console.PrintMessage("Base.x : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.x)+"\n") |
|||
import FreeCAD, Part, math |
|||
App.Console.PrintMessage("Base.y : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.y)+"\n") |
|||
from FreeCAD import Base |
|||
App.Console.PrintMessage("Base.z : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.z)+"\n") |
|||
from PySide import QtGui |
|||
App.Console.PrintMessage("Base.Angle : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Rotation.Angle)+"\n\n") |
|||
################################################################################## |
|||
}} |
|||
global path |
|||
<translate> |
|||
param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")# macro path in FreeCAD preferences |
|||
path = param.GetString("MacroPath","") + "/" # macro path |
|||
path = path.replace("\\","/") # convert the "\" to "/" |
|||
<!--T:40--> |
|||
def setIconInMacro(self): |
|||
'''Note:''' Usually the angles are given in Radian. To convert them: |
|||
return """ |
|||
/* XPM */ |
|||
static char * xpm[] = { |
|||
"22 22 12 1", |
|||
" c None", |
|||
". c #A40000", |
|||
"+ c #2E3436", |
|||
"@ c #CE5C00", |
|||
"# c #F57900", |
|||
"$ c #FCAF3E", |
|||
"% c #5C3566", |
|||
"& c #204A87", |
|||
"* c #555753", |
|||
"= c #3465A4", |
|||
"- c #4E9A06", |
|||
"; c #729FCF", |
|||
" ", |
|||
" ", |
|||
" ", |
|||
" .. .. ", |
|||
" +@#+++.$$ ", |
|||
" +.#+%..$$ ", |
|||
" &*$ &*#* ", |
|||
" & =&= = ", |
|||
" ++& +.== %= ", |
|||
" ++$@ ..$ %= & ", |
|||
" ..-&%.#$$ &## +=$ ", |
|||
" .# ..$ ..#%%.#$$ ", |
|||
" ; =+=## %-$# ", |
|||
" &= ;& %= ", |
|||
" ;+ &=; %= ", |
|||
" ++$- +*$- ", |
|||
" .#&&+.@$$ ", |
|||
" ..$# ..$# ", |
|||
" .. .. ", |
|||
" ", |
|||
" ", |
|||
" "}; |
|||
""" |
|||
<!--T:41--> |
|||
class PartFeature: |
|||
#angle in Degrees to Radians : |
|||
def __init__(self, obj): |
|||
#*Angle in radian = '''pi * (angle in degree) / 180''' |
|||
obj.Proxy = self |
|||
#*Angle in radian = math.radians(angle in degree) |
|||
#angle in Radians to Degrees : |
|||
#*Angle in degree = '''180 * (angle in radian) / pi''' |
|||
#*Angle in degree = math.degrees(angle in radian) |
|||
</translate>{{Top}}<translate> |
|||
class Box(PartFeature): |
|||
def __init__(self, obj): |
|||
PartFeature.__init__(self, obj) |
|||
obj.addProperty("App::PropertyLength", "Length", "Box", "Length of the box").Length = 1.0 |
|||
obj.addProperty("App::PropertyLength", "Width", "Box", "Width of the box" ).Width = 1.0 |
|||
obj.addProperty("App::PropertyLength", "Height", "Box", "Height of the box").Height = 1.0 |
|||
===Cartesian coordinates=== <!--T:42--> |
|||
def onChanged(self, fp, prop): |
|||
try: |
|||
if prop == "Length" or prop == "Width" or prop == "Height": |
|||
fp.Shape = Part.makeBox(fp.Length,fp.Width,fp.Height) |
|||
except: |
|||
pass |
|||
<!--T:43--> |
|||
def execute(self, fp): |
|||
This code displays the Cartesian coordinates of the selected item. |
|||
fp.Shape = Part.makeBox(fp.Length,fp.Width,fp.Height) |
|||
<!--T:44--> |
|||
class ViewProviderBox: |
|||
Change the value of "numberOfPoints" if you want a different number of points (precision) |
|||
def __init__(self, obj, icon): |
|||
obj.Proxy = self |
|||
self.icone = icon |
|||
def getIcon(self): |
|||
return self.icone |
|||
</translate> |
|||
def attach(self, obj): |
|||
{{Code|code= |
|||
return |
|||
numberOfPoints = 100 # Decomposition number (or precision you can change) |
|||
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy() # select one element |
|||
points = selectedEdge.discretize(numberOfPoints) # discretize the element |
|||
i=0 |
|||
for p in points: # list and display the coordinates |
|||
i+=1 |
|||
print( i, " X", p.x, " Y", p.y, " Z", p.z) |
|||
}} |
|||
<translate> |
|||
<!--T:45--> |
|||
def setupContextMenu(self, obj, menu): |
|||
Other method display on "Int" and "Float" |
|||
action = menu.addAction("Set default height") |
|||
action.triggered.connect(lambda f=self.setDefaultHeight, arg=obj:f(arg)) |
|||
</translate> |
|||
action = menu.addAction("Hello World") |
|||
{{Code|code= |
|||
action.triggered.connect(self.showHelloWorld) |
|||
import Part |
|||
from FreeCAD import Base |
|||
c=Part.makeCylinder(2,10) # create the circle |
|||
def setDefaultHeight(self, view): |
|||
Part.show(c) # display the shape |
|||
view.Object.Height = 15.0 |
|||
# slice accepts two arguments: |
|||
def showHelloWorld(self): |
|||
#+ the normal of the cross section plane |
|||
QtGui.QMessageBox.information(None, "Hi there", "Hello World") |
|||
#+ the distance from the origin to the cross section plane. Here you have to find a value so that the plane intersects your object |
|||
s=c.slice(Base.Vector(0,1,0),0) # |
|||
# here the result is a single wire |
|||
def makeBox(): |
|||
# depending on the source object this can be several wires |
|||
FreeCAD.newDocument() |
|||
s=s[0] |
|||
a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","Box") |
|||
Box(a) |
|||
# ViewProviderBox(a.ViewObject, path + "FreeCADIco.png") # icon download to file |
|||
# ViewProviderBox(a.ViewObject, ":/icons/Draft_Draft.svg") # icon to FreeCAD ressource |
|||
ViewProviderBox(a.ViewObject, setIconInMacro("")) # icon in macro (.XPM) |
|||
App.ActiveDocument.recompute() |
|||
# if you only need the vertexes of the shape you can use |
|||
makeBox() |
|||
v=[] |
|||
for i in s.Vertexes: |
|||
v.append(i.Point) |
|||
# but you can also sub-sample the section to have a certain number of points (int) ... |
|||
p1=s.discretize(20) |
|||
ii=0 |
|||
for i in p1: |
|||
ii+=1 |
|||
print( i ) # Vector() |
|||
print( ii, ": X:", i.x, " Y:", i.y, " Z:", i.z ) # Vector decode |
|||
Draft.makeWire(p1,closed=False,face=False,support=None) # to see the difference accuracy (20) |
|||
## uncomment to use |
|||
#import Draft |
|||
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # first transform the DWire in Wire "downgrade" |
|||
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # second split the Wire in single objects "downgrade" |
|||
# |
|||
##Draft.upgrade(FreeCADGui.Selection.getSelection(),delete=True) # to attach lines contiguous SELECTED use "upgrade" |
|||
# ... or define a sampling distance (float) |
|||
p2=s.discretize(0.5) |
|||
ii=0 |
|||
for i in p2: |
|||
ii+=1 |
|||
print( i ) # Vector() |
|||
print( ii, ": X:", i.x, " Y:", i.y, " Z:", i.z ) # Vector decode |
|||
Draft.makeWire(p2,closed=False,face=False,support=None) # to see the difference accuracy (0.5) |
|||
## uncomment to use |
|||
#import Draft |
|||
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # first transform the DWire in Wire "downgrade" |
|||
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # second split the Wire in single objects "downgrade" |
|||
# |
|||
##Draft.upgrade(FreeCADGui.Selection.getSelection(),delete=True) # to attach lines contiguous SELECTED use "upgrade" |
|||
}} |
}} |
||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
==Use QFileDialog for writing to a file== <!--T:61--> |
|||
Complete code: |
|||
===Select all objects in the document=== <!--T:46--> |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import FreeCAD |
|||
# -*- coding: utf-8 -*- |
|||
for obj in FreeCAD.ActiveDocument.Objects: |
|||
import PySide |
|||
print( obj.Name ) # display the object Name |
|||
from PySide import QtGui ,QtCore |
|||
objName = obj.Name |
|||
from PySide.QtGui import * |
|||
obj = App.ActiveDocument.getObject(objName) |
|||
from PySide.QtCore import * |
|||
Gui.Selection.addSelection(obj) # select the object |
|||
path = FreeCAD.ConfigGet("UserAppData") |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
try: |
|||
SaveName = QFileDialog.getSaveFileName(None,QString.fromLocal8Bit("Save a file txt"),path, "*.txt") # PyQt4 |
|||
# "here the text displayed on windows" "here the filter (extension)" |
|||
except Exception: |
|||
SaveName, Filter = PySide.QtGui.QFileDialog.getSaveFileName(None, "Save a file txt", path, "*.txt") # PySide |
|||
# "here the text displayed on windows" "here the filter (extension)" |
|||
if SaveName == "": # if the name file are not selected then Abord process |
|||
App.Console.PrintMessage("Process aborted"+"\n") |
|||
else: # if the name file are selected or created then |
|||
App.Console.PrintMessage("Registration of "+SaveName+"\n") # text displayed to Report view (Menu > View > Report view checked) |
|||
try: # detect error ... |
|||
file = open(SaveName, 'w') # open the file selected to write (w) |
|||
try: # if error detected to write ... |
|||
# here your code |
|||
print "here your code" |
|||
file.write(str(1)+"\n") # write the number convert in text with (str()) |
|||
file.write("FreeCAD the best") # write the the text with (" ") |
|||
except Exception: # if error detected to write |
|||
App.Console.PrintError("Error write file "+"\n") # detect error ... display the text in red (PrintError) |
|||
finally: # if error detected to write ... or not the file is closed |
|||
file.close() # if error detected to write ... or not the file is closed |
|||
except Exception: |
|||
App.Console.PrintError("Error Open file "+SaveName+"\n") # detect error ... display the text in red (PrintError) |
|||
===Select a face of an object by Name object and Face number=== <!--T:49--> |
|||
</translate> |
|||
{{Code|code= |
|||
# select one face of the object |
|||
import FreeCAD, Draft |
|||
App=FreeCAD |
|||
nameObject = "Box" # objet |
|||
faceSelect = "Face3" # face to selection |
|||
loch=App.ActiveDocument.getObject(nameObject) # objet |
|||
Gui.Selection.clearSelection() # clear all selection |
|||
Gui.Selection.addSelection(loch,faceSelect) # select the face specified |
|||
s = Gui.Selection.getSelectionEx() |
|||
#Draft.makeFacebinder(s) # |
|||
}} |
}} |
||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
==Use QFileDialog to read a file== <!--T:62--> |
|||
Complete code: |
|||
===Get the normal vector of a face of an object by Name object and number Face (r.Q)=== <!--T:147--> |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
## normal of a face by giving the number of the face and the name of the object (rotation Q with yL, uV) = (App.Vector (x, y, z), angle)) |
|||
# -*- coding: utf-8 -*- |
|||
## normal d'une face en donnant le numero de la face et le nom de l'objet (rotation Q avec yL, uV) = (App.Vector(x, y, z),angle)) |
|||
import PySide |
|||
from |
from FreeCAD import Vector |
||
from PySide.QtGui import * |
|||
from PySide.QtCore import * |
|||
path = FreeCAD.ConfigGet("UserAppData") |
|||
numero_Face = 2 # number of the face searched (begin 0, 1, 2, 3 .....) |
|||
OpenName = "" |
|||
nomObjet = "Box" # object name |
|||
try: |
|||
yL = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].CenterOfMass |
|||
OpenName = QFileDialog.getOpenFileName(None,QString.fromLocal8Bit("Read a file txt"),path, "*.txt") # PyQt4 |
|||
uv = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].Surface.parameter(yL) |
|||
# "here the text displayed on windows" "here the filter (extension)" |
|||
except Exception: |
|||
OpenName, Filter = PySide.QtGui.QFileDialog.getOpenFileName(None, "Read a file txt", path, "*.txt") #PySide |
|||
# "here the text displayed on windows" "here the filter (extension)" |
|||
if OpenName == "": # if the name file are not selected then Abord process |
|||
App.Console.PrintMessage("Process aborted"+"\n") |
|||
else: |
|||
App.Console.PrintMessage("Read "+OpenName+"\n") # text displayed to Report view (Menu > View > Report view checked) |
|||
try: # detect error to read file |
|||
file = open(OpenName, "r") # open the file selected to read (r) # (rb is binary) |
|||
try: # detect error ... |
|||
# here your code |
|||
print "here your code" |
|||
op = OpenName.split("/") # decode the path |
|||
op2 = op[-1].split(".") # decode the file name |
|||
nomF = op2[0] # the file name are isolated |
|||
nv = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].normalAt(uv[0], uv[1]) |
|||
App.Console.PrintMessage(str(nomF)+"\n") # the file name are displayed |
|||
direction = yL.sub(nv + yL) |
|||
print("Direction : ",direction) |
|||
r = App.Rotation(App.Vector(0,0,1),direction) |
|||
for ligne in file: # read the file |
|||
print("Rotation : ", r) |
|||
X = ligne.rstrip('\n\r') #.split() # decode the line |
|||
print("Rotation Q : ", r.Q) |
|||
print X # print the line in report view other method |
|||
# (Menu > Edit > preferences... > Output window > Redirect internal Python output (and errors) to report view checked) |
|||
except Exception: # if error detected to read |
|||
App.Console.PrintError("Error read file "+"\n") # detect error ... display the text in red (PrintError) |
|||
finally: # if error detected to read ... or not error the file is closed |
|||
file.close() # if error detected to read ... or not error the file is closed |
|||
except Exception: # if one error detected to read file |
|||
App.Console.PrintError("Error in Open the file "+OpenName+"\n") # if one error detected ... display the text in red (PrintError) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
==Use QColorDialog to get the color== <!--T:63--> |
|||
Complete code: |
|||
===Get the normal vector of a face of an object by Name object and number of Face=== <!--T:149--> |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
numero_Face = 2 # number of the face searched (begin 0, 1, 2, 3 .....) |
|||
# -*- coding: utf-8 -*- |
|||
nomObjet = "Box" # object name |
|||
# https://deptinfo-ensip.univ-poitiers.fr/ENS/pyside-docs/PySide/QtGui/QColor.html |
|||
normal = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].normalAt(0,0) |
|||
import PySide |
|||
print("Face"+str(numero_Face), " : ", normal) |
|||
from PySide import QtGui ,QtCore |
|||
from PySide.QtGui import * |
|||
from PySide.QtCore import * |
|||
path = FreeCAD.ConfigGet("UserAppData") |
|||
}} |
|||
couleur = QtGui.QColorDialog.getColor() |
|||
<translate> |
|||
if couleur.isValid(): |
|||
red = int(str(couleur.name()[1:3]),16) # decode hexadecimal to int() |
|||
green = int(str(couleur.name()[3:5]),16) # decode hexadecimal to int() |
|||
blue = int(str(couleur.name()[5:7]),16) # decode hexadecimal to int() |
|||
</translate>{{Top}}<translate> |
|||
print couleur # |
|||
print "hexadecimal ",couleur.name() # color format hexadecimal mode 16 |
|||
print "Red color ",red # color format decimal |
|||
print "Green color ",green # color format decimal |
|||
print "Blue color ",blue # color format decimal |
|||
===Get the normal vector of an object selected and number of Face=== <!--T:151--> |
|||
</translate> |
|||
{{Code|code= |
|||
## normal of a face by giving the number of the face of the selected object |
|||
selectionObjects = FreeCADGui.Selection.getSelection() |
|||
numero_Face = 3 # numero de la face recherchee |
|||
normal = selectionObjects[0].Shape.Faces[numero_Face].normalAt(0,0) |
|||
print(normal) |
|||
# selectionne la face numerotee |
|||
Gui.Selection.clearSelection() |
|||
Gui.Selection.addSelection(selectionObjects[0],"Face"+str(numero_Face)) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
==Some useful commands== <!--T:39--> |
|||
===Get the normal vector on the surface=== <!--T:56--> |
|||
<!--T:57--> |
|||
This example show how to find normal vector on the surface by find the u,v parameters of one point on the surface and use u,v parameters to find normal vector |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
def normal(self): |
|||
# Here the code to display the icon on the '''pushButton''', |
|||
ss=FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy()#SubObjects[0] is the edge list |
|||
# change the name to another button, ('''radioButton, checkBox''') as well as the path to the icon, |
|||
points = ss.discretize(3.0)#points on the surface edge, |
|||
#this example just use points on the edge for example. |
|||
#However point is not necessary on the edge, it can be anywhere on the surface. |
|||
face=FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1] |
|||
for pp in points: |
|||
pt=FreeCAD.Base.Vector(pp.x,pp.y,pp.z)#a point on the surface edge |
|||
uv=face.Surface.parameter(pt)# find the surface u,v parameter of a point on the surface edge |
|||
u=uv[0] |
|||
v=uv[1] |
|||
normal=face.normalAt(u,v)#use u,v to find normal vector |
|||
print( normal) |
|||
line=Part.makeLine((pp.x,pp.y,pp.z), (normal.x,normal.y,normal.z)) |
|||
Part.show(line) |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
# Displays an icon on the button PushButton |
|||
# self.image_01 = "C:\Program Files\FreeCAD0.13\icone01.png" # he name of the icon |
|||
self.image_01 = path+"icone01.png" # the name of the icon |
|||
icon01 = QtGui.QIcon() |
|||
icon01.addPixmap(QtGui.QPixmap(self.image_01),QtGui.QIcon.Normal, QtGui.QIcon.Off) |
|||
self.pushButton.setIcon(icon01) |
|||
self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the direction of the button |
|||
=== Get the normal vector of the face and create a line at the point mouse clicked === <!--T:162--> |
|||
</translate> |
|||
# path = FreeCAD.ConfigGet("UserAppData") # gives the user path |
|||
{{Code|code= |
|||
path = FreeCAD.ConfigGet("AppHomePath") # gives the installation path of FreeCAD |
|||
import PySide2 |
|||
import Draft, Part, FreeCAD, FreeCADGui |
|||
import FreeCADGui as Gui |
|||
from FreeCAD import Base |
|||
FreeCAD.ActiveDocument.openTransaction("Tyty") # memorise les actions (avec annuler restore) |
|||
# This command reverses the horizontal button, right to left |
|||
selectedFace = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0] |
|||
self.pushButton.setLayoutDirection(QtCore.Qt.RightToLeft) # This command reverses the horizontal button |
|||
pointClick = FreeCADGui.Selection.getSelectionEx()[0].PickedPoints[0] |
|||
########## section direction |
|||
# Displays an info button |
|||
plr = FreeCAD.Placement() |
|||
self.pushButton.setToolTip(_translate("MainWindow", "Quitter la fonction", None)) # Displays an info button |
|||
yL = pointClick |
|||
uv = selectedFace.Surface.parameter(yL) |
|||
nv = direction = selectedFace.normalAt(uv[0], uv[1]) |
|||
r = App.Rotation(App.Vector(0,0,1),nv) |
|||
plr.Rotation.Q = r.Q |
|||
plr.Base = pointClick |
|||
########## section direction |
|||
line = Draft.make_wire([App.Vector(0.0,0.0,0.0), App.Vector(0.0,0.0,20.0)] ) # create line |
|||
# This function gives a color button |
|||
line.Placement=plr |
|||
self.pushButton.setStyleSheet("background-color: red") # This function gives a color button |
|||
FreeCAD.ActiveDocument.recompute() |
|||
print( "Direction (radian) : ",direction ) # direction in radian |
|||
}} |
|||
<translate> |
|||
# This function gives a color to the text of the button |
|||
self.pushButton.setStyleSheet("color : #ff0000") # This function gives a color to the text of the button |
|||
</translate>{{Top}}<translate> |
|||
# combinaison des deux, bouton et texte |
|||
self.pushButton.setStyleSheet("color : #ff0000; background-color : #0000ff;" ) # combination of the two, button, and text |
|||
===Get the normal vector of a surface from a STL file=== <!--T:73--> |
|||
# replace the icon in the main window |
|||
MainWindow.setWindowIcon(QtGui.QIcon('C:\Program Files\FreeCAD0.13\View-C3P.png')) |
|||
</translate> |
|||
# connects a lineEdit on execute |
|||
{{Code|code= |
|||
self.lineEdit.returnPressed.connect(self.execute) # connects a lineEdit on "def execute" after validation on enter |
|||
def getNormal(cb): |
|||
# self.lineEdit.textChanged.connect(self.execute) # connects a lineEdit on "def execute" with each keystroke on the keyboard |
|||
if cb.getEvent().getState() == coin.SoButtonEvent.UP: |
|||
pp = cb.getPickedPoint() |
|||
if pp: |
|||
vec = pp.getNormal().getValue() |
|||
index = coin.cast(pp.getDetail(), "SoFaceDetail").getFaceIndex() |
|||
print("Normal: {}, Face index: {}".format(str(vec), index)) |
|||
from pivy import coin |
|||
# display text in a lineEdit |
|||
meth=Gui.ActiveDocument.ActiveView.addEventCallbackPivy(coin.SoMouseButtonEvent.getClassTypeId(), getNormal) |
|||
self.lineEdit.setText(str(val_X)) # Displays the value in the lineEdit (convert to string) |
|||
}} |
|||
<translate> |
|||
# extract the string contained in a lineEdit |
|||
<!--T:74--> |
|||
val_X = self.lineEdit.text() # extract the (string) string contained in lineEdit |
|||
you are done then run for quit: |
|||
val_X = float(val_X0) # converted the string to an floating |
|||
val_X = int(val_X0) # convert the string to an integer |
|||
</translate> |
|||
# This code allows you to change the font and its attributes |
|||
{{Code|code= |
|||
font = QtGui.QFont() |
|||
Gui.ActiveDocument.ActiveView.removeEventCallbackPivy(coin.SoMouseButtonEvent.getClassTypeId(), meth) |
|||
font.setFamily("Times New Roman") |
|||
font.setPointSize(10) |
|||
font.setWeight(10) |
|||
font.setBold(True) # same result with tags "<b>your text</b>" (in quotes) |
|||
self.label_6.setFont(font) |
|||
self.label_6.setObjectName("label_6") |
|||
self.label_6.setStyleSheet("color : #ff0000") # This function gives a color to the text |
|||
self.label_6.setText(_translate("MainWindow", "Select a view", None)) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
<!--T:40--> |
|||
By using the characters with accents, where you get the error : |
|||
===Create one object to the position of the Camera=== <!--T:48--> |
|||
<!--T:42--> |
|||
<FONT COLOR="#FF0000">'''UnicodeDecodeError: 'utf8' codec can't decode bytes in position 0-2: invalid data'''</FONT> |
|||
<!--T:41--> |
|||
Several solutions are possible. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
# create one object of the position to camera with "getCameraOrientation()" |
|||
# conversion from a lineEdit |
|||
# the object is still facing the screen |
|||
App.activeDocument().CopyRight.Text = str(unicode(self.lineEdit_20.text() , 'ISO-8859-1').encode('UTF-8')) |
|||
import Draft |
|||
DESIGNED_BY = unicode(self.lineEdit_01.text(), 'ISO-8859-1').encode('UTF-8') |
|||
plan = FreeCADGui.ActiveDocument.ActiveView.getCameraOrientation() |
|||
plan = str(plan) |
|||
###### extract data |
|||
a = "" |
|||
for i in plan: |
|||
if i in ("0123456789e.- "): |
|||
a+=i |
|||
a = a.strip(" ") |
|||
a = a.split(" ") |
|||
####### extract data |
|||
#print( a) |
|||
#print( a[0]) |
|||
#print( a[1]) |
|||
#print( a[2]) |
|||
#print( a[3]) |
|||
xP = float(a[0]) |
|||
yP = float(a[1]) |
|||
zP = float(a[2]) |
|||
qP = float(a[3]) |
|||
pl = FreeCAD.Placement() |
|||
pl.Rotation.Q = (xP,yP,zP,qP) # rotation of object |
|||
pl.Base = FreeCAD.Vector(0.0,0.0,0.0) # here coordinates XYZ of Object |
|||
rec = Draft.makeRectangle(length=10.0,height=10.0,placement=pl,face=False,support=None) # create rectangle |
|||
#rec = Draft.makeCircle(radius=5,placement=pl,face=False,support=None) # create circle |
|||
print( rec.Name) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:43--> |
|||
<!--T:53--> |
|||
or with the procedure |
|||
here same code simplified |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import Draft |
|||
def utf8(unio): |
|||
pl = FreeCAD.Placement() |
|||
return unicode(unio).encode('UTF8') |
|||
pl.Rotation = FreeCADGui.ActiveDocument.ActiveView.getCameraOrientation() |
|||
pl.Base = FreeCAD.Vector(0.0,0.0,0.0) |
|||
rec = Draft.makeRectangle(length=10.0,height=10.0,placement=pl,face=False,support=None) |
|||
}} |
}} |
||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
<FONT COLOR="#FF0000">'''UnicodeEncodeError: 'ascii' codec can't encode character u'\xe9' in position 9: ordinal not in range(128)'''</FONT> |
|||
===Read And write one Expression=== <!--T:59--> |
|||
</translate> |
|||
{{Code|code= |
{{Code|code= |
||
import Draft |
|||
# conversion |
|||
doc = FreeCAD.ActiveDocument |
|||
a = u"Nom de l'élément : " |
|||
f.write('''a.encode('iso-8859-1')'''+str(element_)+"\n") |
|||
pl=FreeCAD.Placement() |
|||
pl.Rotation.Q=(0.0,-0.0,-0.0,1.0) |
|||
pl.Base=FreeCAD.Vector(0.0,0.0,0.0) |
|||
obj = Draft.makeCircle(radius=1.0,placement=pl,face=False,support=None) # create circle |
|||
print( obj.PropertiesList ) # properties disponible in the obj |
|||
doc.getObject(obj.Name).setExpression('Radius', u'2mm') # modify the radius |
|||
doc.getObject(obj.Name).setExpression('Placement.Base.x', u'10mm') # modify the placement |
|||
doc.getObject(obj.Name).setExpression('FirstAngle', u'90') # modify the first angle |
|||
doc.recompute() |
|||
expressions = obj.ExpressionEngine # read the expression list |
|||
print( expressions) |
|||
for i in expressions: # list and separate the data expression |
|||
print( i[0]," = ",i[1]) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:44--> |
|||
</translate>{{Top}}<translate> |
|||
or with the procedure |
|||
===Create a Sketch on a Surface in PartDesign=== <!--T:77--> |
|||
<!--T:78--> |
|||
This snippet can be useful, if you want to create a sketch on a surface in PartDesign from inside a macro. |
|||
Note, that body might be None, if no active body is selected and that the Selection might be empty. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
body = Gui.ActiveDocument.ActiveView.getActiveObject('pdbody') |
|||
def iso8859(encoder): |
|||
first_selection = Gui.Selection.getSelectionEx()[0] |
|||
return unicode(encoder).encode('iso-8859-1') |
|||
feature = first_selection.Object |
|||
face_name = first_selection.SubElementNames[0] |
|||
sketch = App.ActiveDocument.addObject('Sketcher::SketchObject','MySketch') |
|||
body.addObject(sketch) |
|||
sketch.MapMode = 'FlatFace' |
|||
sketch.Support = (feature, face_name) |
|||
App.ActiveDocument.recompute() |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:45--> |
|||
</translate>{{Top}}<translate> |
|||
or |
|||
===How to Simulate a Mouse Click at a given Coordinate=== <!--T:85--> |
|||
<!--T:86--> |
|||
The position is relative to the GL widget. See [https://forum.freecadweb.org/viewtopic.php?f=22&t=44008 forum thread]. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
from PySide2 import QtCore |
|||
iso8859(unichr(176)) |
|||
from PySide2 import QtGui |
|||
from PySide2 import QtWidgets |
|||
mw = Gui.getMainWindow() |
|||
gl = mw.findChild(QtWidgets.QOpenGLWidget) |
|||
me = QtGui.QMouseEvent(QtCore.QEvent.MouseButtonRelease, QtCore.QPoint(800,300), QtCore.Qt.LeftButton, QtCore.Qt.LeftButton, QtCore.Qt.NoModifier) |
|||
app = QtWidgets.QApplication.instance() |
|||
app.sendEvent(gl, me) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:46--> |
|||
<!--T:153--> |
|||
or |
|||
If you have a 3d point and want to get the 2d point on the opengl widget then use this: |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
from PySide2 import QtCore |
|||
unichr(ord(176)) |
|||
from PySide2 import QtGui |
|||
from PySide2 import QtWidgets |
|||
from FreeCAD import Base |
|||
x, y, z, = 10,10,10 |
|||
v = Gui.ActiveDocument.ActiveView |
|||
point3d = Base.Vector(x, y, z) |
|||
point2d = v.getPointOnScreen(point3d) |
|||
size = v.getSize() |
|||
coordX = point2d[0] |
|||
coordY = size[1] - point2d[1] |
|||
me = QtGui.QMouseEvent(QtCore.QEvent.MouseButtonRelease, QtCore.QPoint(coordX,coordY), QtCore.Qt.LeftButton, QtCore.Qt.LeftButton, QtCore.Qt.NoModifier) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
<!--T:47--> |
|||
</translate>{{Top}}<translate> |
|||
or |
|||
=== How to create a face with holes using Python API === <!--T:154--> |
|||
<!--T:155--> |
|||
This snippet demonstrates how to create a face with internal holes through the Python API. See [https://forum.freecadweb.org/viewtopic.php?f=22&t=56308 forum thread]. |
|||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
import FreeCAD, Part |
|||
uniteSs = "mm"+iso8859(unichr(178)) |
|||
print unicode(uniteSs, 'iso8859') |
|||
# Create poles that will define the Face |
|||
pts = [(-2, 2, 0), |
|||
(0, 2, 1), |
|||
(2, 2, 0), |
|||
(2, -2, 0), |
|||
(0, -2, 1), |
|||
(-2, -2, 0)] |
|||
bs = Part.BSplineCurve() |
|||
bs.buildFromPoles(pts, True) # True makes this periodic/closed |
|||
# Make the Face from the curve |
|||
myFace = Part.makeFilledFace([bs.toShape()]) |
|||
# Create geometry for holes that will be cut in the surface |
|||
hole0 = Part.Geom2d.Circle2d(FreeCAD.Base.Vector2d(0,0), 1.0) |
|||
hole1 = Part.Geom2d.Circle2d(FreeCAD.Base.Vector2d(0,1.5), 0.1) |
|||
edge0 = hole0.toShape(myFace) |
|||
edge1 = hole1.toShape(myFace) |
|||
wireb = Part.Wire(bs.toShape()) |
|||
wire0 = Part.Wire(edge0) |
|||
wire1 = Part.Wire(edge1) |
|||
# Cut holes in the face |
|||
myFace.cutHoles([wire0]) |
|||
myFace.validate() # This is required |
|||
myFace.cutHoles([wire1]) |
|||
myFace.validate() |
|||
Part.show(myFace) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
</translate>{{Top}}<translate> |
|||
=== Close and restart FreeCAD === <!--T:161--> |
|||
</translate> |
|||
{{Code|code= |
|||
import PySide2 |
|||
from PySide2 import QtWidgets, QtCore, QtGui |
|||
def restart_freecad(): |
|||
"""Shuts down and restarts FreeCAD""" |
|||
args = QtWidgets.QApplication.arguments()[1:] |
|||
if FreeCADGui.getMainWindow().close(): |
|||
QtCore.QProcess.startDetached( |
|||
QtWidgets.QApplication.applicationFilePath(), args |
|||
) |
|||
}} |
|||
<translate> |
|||
</translate>{{Top}}<translate> |
|||
==Coin3D== <!--T:157--> |
|||
<!--T:158--> |
|||
See [[Coin3d_snippets|Coin3d snippets]] |
|||
</translate>{{Top}}<translate> |
|||
==Related== <!--T:87--> |
|||
<!--T:88--> |
|||
* [[Scripted objects]] |
|||
* [[Macros]] |
|||
* [[Topological_data_scripting]] |
|||
</translate>{{Top}}<translate> |
|||
<!--T:48--> |
|||
{{docnav|Line drawing function|Licence}} |
|||
<!--T:49--> |
|||
[[Category:Poweruser Documentation]] |
|||
[[Category:Python Code]] |
|||
</translate> |
</translate> |
||
{{Powerdocnavi{{#translation:}}}} |
|||
{{clear}} |
|||
[[Category:Developer Documentation{{#translation:}}]] |
|||
[[Category:Python Code{{#translation:}}]] |
Latest revision as of 08:06, 11 January 2024
Introduction
This page contains examples, pieces, chunks of FreeCAD python code collected from users experiences and discussions on the forums. Read and use it as a start for your own scripts...
Snippets
A typical InitGui.py file
Every module must contain, besides your main module file, an InitGui.py file, responsible for inserting the module in the main Gui. This is an example of a simple one.
class ScriptWorkbench (Workbench):
MenuText = "Scripts"
def Initialize(self):
import Scripts # assuming Scripts.py is your module
list = ["Script_Cmd"] # That list must contain command names, that can be defined in Scripts.py
self.appendToolbar("My Scripts",list)
Gui.addWorkbench(ScriptWorkbench())
A typical module file
This is an example of a main module file, containing everything your module does. It is the Scripts.py file invoked by the previous example. You can have all your custom commands here.
import FreeCAD, FreeCADGui
class ScriptCmd:
def Activated(self):
# Here your write what your ScriptCmd does...
FreeCAD.Console.PrintMessage('Hello, World!')
def GetResources(self):
return {'Pixmap' : 'path_to_an_icon/myicon.png', 'MenuText': 'Short text', 'ToolTip': 'More detailed text'}
FreeCADGui.addCommand('Script_Cmd', ScriptCmd())
Import a new filetype
Making an importer for a new filetype in FreeCAD is easy. FreeCAD doesn't consider that you import data in an opened document, but rather that you simply can directly open the new filetype. So what you need to do is to add the new file extension to FreeCAD's list of known extensions, and write the code that will read the file and create the FreeCAD objects you want:
This line must be added to the InitGui.py file to add the new file extension to the list:
# Assumes Import_Ext.py is the file that has the code for opening and reading .ext files
FreeCAD.addImportType("Your new File Type (*.ext)","Import_Ext")
Then in the Import_Ext.py file:
def open(filename):
doc=App.newDocument()
# here you do all what is needed with filename, read, classify data, create corresponding FreeCAD objects
doc.recompute()
To export your document to some new filetype works the same way, except that you use:
FreeCAD.addExportType("Your new File Type (*.ext)","Export_Ext")
Add a line
A line simply has 2 points.
import Part,PartGui
doc=App.activeDocument()
# add a line element to the document and set its points
l=Part.LineSegment()
l.StartPoint=(0.0,0.0,0.0)
l.EndPoint=(1.0,1.0,1.0)
doc.addObject("Part::Feature","Line").Shape=l.toShape()
doc.recompute()
Add a polygon
A polygon is simply a set of connected line segments (a polyline in AutoCAD). It doesn't need to be closed.
import Part, PartGui
doc = App.activeDocument()
n = list()
# create a 3D vector, set its coordinates and add it to the list
v = App.Vector(0,0,0)
n.append(v)
v = App.Vector(10,0,0)
n.append(v)
#... repeat for all nodes
# Create a polygon object and set its nodes
p = doc.addObject("Part::Polygon","Polygon")
p.Nodes = n
doc.recompute()
Add and remove an object to/from a group
doc=App.activeDocument()
grp=doc.addObject("App::DocumentObjectGroup", "Group")
lin=doc.addObject("Part::Feature", "Line")
grp.addObject(lin) # adds the lin object to the group grp
grp.removeObject(lin) # removes the lin object from the group grp
Note: You can even add other groups to a group...
Add a Mesh
import Mesh
doc=App.activeDocument()
# create a new empty mesh
m = Mesh.Mesh()
# build up box out of 12 facets
m.addFacet(0.0,0.0,0.0, 0.0,0.0,1.0, 0.0,1.0,1.0)
m.addFacet(0.0,0.0,0.0, 0.0,1.0,1.0, 0.0,1.0,0.0)
m.addFacet(0.0,0.0,0.0, 1.0,0.0,0.0, 1.0,0.0,1.0)
m.addFacet(0.0,0.0,0.0, 1.0,0.0,1.0, 0.0,0.0,1.0)
m.addFacet(0.0,0.0,0.0, 0.0,1.0,0.0, 1.0,1.0,0.0)
m.addFacet(0.0,0.0,0.0, 1.0,1.0,0.0, 1.0,0.0,0.0)
m.addFacet(0.0,1.0,0.0, 0.0,1.0,1.0, 1.0,1.0,1.0)
m.addFacet(0.0,1.0,0.0, 1.0,1.0,1.0, 1.0,1.0,0.0)
m.addFacet(0.0,1.0,1.0, 0.0,0.0,1.0, 1.0,0.0,1.0)
m.addFacet(0.0,1.0,1.0, 1.0,0.0,1.0, 1.0,1.0,1.0)
m.addFacet(1.0,1.0,0.0, 1.0,1.0,1.0, 1.0,0.0,1.0)
m.addFacet(1.0,1.0,0.0, 1.0,0.0,1.0, 1.0,0.0,0.0)
# scale to a edge langth of 100
m.scale(100.0)
# add the mesh to the active document
me=doc.addObject("Mesh::Feature","Cube")
me.Mesh=m
Add an arc or a circle
import Part
doc = App.activeDocument()
c = Part.Circle()
c.Radius=10.0
f = doc.addObject("Part::Feature", "Circle") # create a document with a circle feature
f.Shape = c.toShape() # Assign the circle shape to the shape property
doc.recompute()
Access and change the representation of an object
Each object in a FreeCAD document has an associated view representation object that stores all the parameters that define how that object appears: i.e. color, linewidth, etc... See also List the components of an object snippet below
gad = Gui.activeDocument() # access the active document containing all
# view representations of the features in the
# corresponding App document
v = gad.getObject("Cube") # access the view representation to the Mesh feature 'Cube'
v.ShapeColor # prints the color to the console
v.ShapeColor=(1.0,1.0,1.0) # sets the shape color to white
Replace the form of mouse with one image
import PySide2
from PySide2 import QtCore, QtGui, QtWidgets
from PySide2.QtWidgets import QApplication
from PySide2.QtGui import QColor, QPixmap, QImage, QPainter, QCursor
from PySide2.QtCore import Qt
myImage = QtGui.QPixmap("Complete_Path_to_image.bmp")
cursor = QtGui.QCursor(myImage)
QtWidgets.QApplication.setOverrideCursor(QtGui.QCursor(cursor))
Replace the form of mouse with one image (cross) include
The image is created by Gimp exported in a .XPM file. Copy and use the code between the bracket "{" code to copy "}"
import PySide2
from PySide2 import QtCore, QtGui, QtWidgets
from PySide2.QtWidgets import QApplication
from PySide2.QtGui import QColor, QPixmap, QImage, QPainter, QCursor
from PySide2.QtCore import Qt
cross32x32Icon = [
"32 32 2 1",
" c None",
". c #FF0000",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" ",
"............... . ..............",
" ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . ",
" . "
]
myImage = QtGui.QPixmap(cross32x32Icon)
cursor = QtGui.QCursor(myImage)
QtWidgets.QApplication.setOverrideCursor(QtGui.QCursor(cursor))
Observe camera change in the 3D viewer via Python
This can be done adding a Node sensor to the camera:
from pivy import coin
def callback(*args):
cam, sensor = args
print()
print("Cam position : {}".format(cam.position.getValue().getValue()))
print("Cam rotation : {}".format(cam.orientation.getValue().getValue()))
camera_node = Gui.ActiveDocument.ActiveView.getCameraNode()
node_sensor = coin.SoNodeSensor(callback, camera_node)
node_sensor.attach(camera_node)
Observe mouse events in the 3D viewer via Python
The Inventor framework allows to add one or more callback nodes to the scenegraph of the viewer. By default in FreeCAD one callback node is installed per viewer which allows to add global or static C++ functions. In the appropriate Python binding some methods are provided to make use of this technique from within Python code.
App.newDocument()
v=Gui.activeDocument().activeView()
#This class logs any mouse button events. As the registered callback function fires twice for 'down' and
#'up' events we need a boolean flag to handle this.
class ViewObserver:
def logPosition(self, info):
down = (info["State"] == "DOWN")
pos = info["Position"]
if (down):
FreeCAD.Console.PrintMessage("Clicked on position: ("+str(pos[0])+", "+str(pos[1])+")\n")
o = ViewObserver()
c = v.addEventCallback("SoMouseButtonEvent",o.logPosition)
Now, pick somewhere on the area in the 3D viewer and observe the messages in the output window. To finish the observation just call
v.removeEventCallback("SoMouseButtonEvent",c)
The following event types are supported
- SoEvent -- all kind of events
- SoButtonEvent -- all mouse button and key events
- SoLocation2Event -- 2D movement events (normally mouse movements)
- SoMotion3Event -- 3D movement events (normally spaceball)
- SoKeyboardEvent -- key down and up events
- SoMouseButtonEvent -- mouse button down and up events
- SoSpaceballButtonEvent -- spaceball button down and up events
The Python function that can be registered with addEventCallback() expects a dictionary. Depending on the watched event the dictionary can contain different keys.
For all events it has the keys:
- Type -- the name of the event type i.e. SoMouseEvent, SoLocation2Event, ...
- Time -- the current time as string
- Position -- a tuple of two integers, mouse position
- ShiftDown -- a boolean, true if Shift was pressed otherwise false
- CtrlDown -- a boolean, true if Ctrl was pressed otherwise false
- AltDown -- a boolean, true if Alt was pressed otherwise false
For all button events, i.e. keyboard, mouse or spaceball events
- State -- A string 'UP' if the button was up, 'DOWN' if it was down or 'UNKNOWN' for all other cases
For keyboard events:
- Key -- a character of the pressed key
For mouse button event
- Button -- The pressed button, could be BUTTON1, ..., BUTTON5 or ANY
For spaceball events:
- Button -- The pressed button, could be BUTTON1, ..., BUTTON7 or ANY
And finally motion events:
- Translation -- a tuple of three floats
- Rotation -- a quaternion for the rotation, i.e. a tuple of four floats
Display keys pressed and Events command
This macro displays in the report view the keys pressed and all events command
App.newDocument()
v=Gui.activeDocument().activeView()
class ViewObserver:
def logPosition(self, info):
try:
down = (info["Key"])
FreeCAD.Console.PrintMessage(str(down)+"\n") # here the character pressed
FreeCAD.Console.PrintMessage(str(info)+"\n") # list all events command
FreeCAD.Console.PrintMessage("_______________________________________"+"\n")
except Exception:
None
o = ViewObserver()
c = v.addEventCallback("SoEvent",o.logPosition)
#v.removeEventCallback("SoEvent",c) # remove ViewObserver
Manipulate the scenegraph in Python
It is also possible to get and change the scenegraph in Python, with the 'pivy' module -- a Python binding for Coin.
from pivy.coin import * # load the pivy module
view = Gui.ActiveDocument.ActiveView # get the active viewer
root = view.getSceneGraph() # the root is an SoSeparator node
root.addChild(SoCube())
view.fitAll()
The Python API of pivy is created by using the tool SWIG. As we use in FreeCAD some self-written nodes you cannot create them directly in Python. However, it is possible to create a node by its internal name. An instance of the type 'SoFCSelection' can be created with
type = SoType.fromName("SoFCSelection")
node = type.createInstance()
Add and remove objects to/from the scenegraph
Adding new nodes to the scenegraph can be done this way. Take care of always adding a SoSeparator to contain the geometry, coordinates and material info of a same object. The following example adds a red line from (0,0,0) to (10,0,0):
from pivy import coin
sg = Gui.ActiveDocument.ActiveView.getSceneGraph()
co = coin.SoCoordinate3()
pts = [[0,0,0],[10,0,0]]
co.point.setValues(0,len(pts),pts)
ma = coin.SoBaseColor()
ma.rgb = (1,0,0)
li = coin.SoLineSet()
li.numVertices.setValue(2)
no = coin.SoSeparator()
no.addChild(co)
no.addChild(ma)
no.addChild(li)
sg.addChild(no)
To remove it, simply issue:
sg.removeChild(no)
Save the sceneGraph in 3 series of 36 files
View the code snippet by expanding this section
import math
import time
from FreeCAD import Base
from pivy import coin
size=(1000,1000)
dirname = "C:/Temp/animation/"
steps=36
angle=2*math.pi/steps
matX=Base.Matrix()
matX.rotateX(angle)
stepsX=Base.Placement(matX).Rotation
matY=Base.Matrix()
matY.rotateY(angle)
stepsY=Base.Placement(matY).Rotation
matZ=Base.Matrix()
matZ.rotateZ(angle)
stepsZ=Base.Placement(matZ).Rotation
view=Gui.ActiveDocument.ActiveView
cam=view.getCameraNode()
rotCamera=Base.Rotation(*cam.orientation.getValue().getValue())
# this sets the lookat point to the center of circumsphere of the global bounding box
view.fitAll()
# the camera's position, i.e. the user's eye point
position=Base.Vector(*cam.position.getValue().getValue())
distance=cam.focalDistance.getValue()
# view direction
vec=rotCamera.multVec(Base.Vector(0,0,-1))
# this is the point on the screen the camera looks at
# when rotating the camera we should make this point fix
lookat=position+vec*distance
# around x axis
for i in range(steps):
rotCamera=stepsX.multiply(rotCamera)
cam.orientation.setValue(*rotCamera.Q)
vec=rotCamera.multVec(Base.Vector(0,0,-1))
pos=lookat-vec*distance
cam.position.setValue(pos.x,pos.y,pos.z)
Gui.updateGui()
time.sleep(0.3)
view.saveImage(dirname+"x-%d.png" % i,*size)
# around y axis
for i in range(steps):
rotCamera=stepsY.multiply(rotCamera)
cam.orientation.setValue(*rotCamera.Q)
vec=rotCamera.multVec(Base.Vector(0,0,-1))
pos=lookat-vec*distance
cam.position.setValue(pos.x,pos.y,pos.z)
Gui.updateGui()
time.sleep(0.3)
view.saveImage(dirname+"y-%d.png" % i,*size)
# around z axis
for i in range(steps):
rotCamera=stepsZ.multiply(rotCamera)
cam.orientation.setValue(*rotCamera.Q)
vec=rotCamera.multVec(Base.Vector(0,0,-1))
pos=lookat-vec*distance
cam.position.setValue(pos.x,pos.y,pos.z)
Gui.updateGui()
time.sleep(0.3)
view.saveImage(dirname+"z-%d.png" % i,*size)
Add custom widgets to the interface
You can create custom widgets with Qt designer, transform them into a python script, and then load them into the FreeCAD interface with PySide.
The python code produced by the Ui python compiler (the tool that converts qt-designer .ui files into python code) generally looks like this (it is simple, you can also code it directly in python):
class myWidget_Ui(object):
def setupUi(self, myWidget):
myWidget.setObjectName("my Nice New Widget")
myWidget.resize(QtCore.QSize(QtCore.QRect(0,0,300,100).size()).expandedTo(myWidget.minimumSizeHint())) # sets size of the widget
self.label = QtGui.QLabel(myWidget) # creates a label
self.label.setGeometry(QtCore.QRect(50,50,200,24)) # sets its size
self.label.setObjectName("label") # sets its name, so it can be found by name
def retranslateUi(self, draftToolbar): # built-in QT function that manages translations of widgets
myWidget.setWindowTitle(QtGui.QApplication.translate("myWidget", "My Widget", None, QtGui.QApplication.UnicodeUTF8))
self.label.setText(QtGui.QApplication.translate("myWidget", "Welcome to my new widget!", None, QtGui.QApplication.UnicodeUTF8))
Then, all you need to do is to create a reference to the FreeCAD Qt window, insert a custom widget into it, and "transform" this widget into yours with the Ui code we just made:
app = QtGui.qApp
FCmw = app.activeWindow() # the active qt window, = the freecad window since we are inside it
# FCmw = FreeCADGui.getMainWindow() # use this line if the 'addDockWidget' error is declared
myNewFreeCADWidget = QtGui.QDockWidget() # create a new dckwidget
myNewFreeCADWidget.ui = myWidget_Ui() # load the Ui script
myNewFreeCADWidget.ui.setupUi(myNewFreeCADWidget) # setup the ui
FCmw.addDockWidget(QtCore.Qt.RightDockWidgetArea,myNewFreeCADWidget) # add the widget to the main window
Add a Tab to the Combo View
The following code allows you to add a tab to the Combo view, separate from the preexisting "Model" and "Tasks" tabs. It also uses the uic
module to load an UI file directly in that tab.
# create new Tab in ComboView
from PySide import QtGui,QtCore
#from PySide import uic
def getMainWindow():
"returns the main window"
# using QtGui.qApp.activeWindow() isn't very reliable because if another
# widget than the mainwindow is active (e.g. a dialog) the wrong widget is
# returned
toplevel = QtGui.qApp.topLevelWidgets()
for i in toplevel:
if i.metaObject().className() == "Gui::MainWindow":
return i
raise Exception("No main window found")
def getComboView(mw):
dw=mw.findChildren(QtGui.QDockWidget)
for i in dw:
if str(i.objectName()) == "Combo View":
return i.findChild(QtGui.QTabWidget)
elif str(i.objectName()) == "Python Console":
return i.findChild(QtGui.QTabWidget)
raise Exception ("No tab widget found")
mw = getMainWindow()
tab = getComboView(getMainWindow())
tab2=QtGui.QDialog()
tab.addTab(tab2,"A Special Tab")
#uic.loadUi("/myTaskPanelforTabs.ui",tab2)
tab2.show()
#tab.removeTab(2)
Enable or disable a window
This script give the ability to manipulate the UI from the Python console to show/hide different components in the FreeCAD interface such as:
- Report view
- Tree view
- Property view
- Selection view
- Combo view
- Python console
- draftToolbar
from PySide import QtGui
mw = FreeCADGui.getMainWindow()
dws = mw.findChildren(QtGui.QDockWidget)
# objectName may be :
# "Report view"
# "Tree view"
# "Property view"
# "Selection view"
# "Combo View"
# "Python console"
# "draftToolbar"
for i in dws:
if i.objectName() == "Report view":
dw = i
break
va = dw.toggleViewAction()
va.setChecked(True) # True or False
dw.setVisible(True) # True or False
Open a custom webpage
import WebGui
WebGui.openBrowser("http://www.example.com")
Get the HTML contents of an opened webpage
from PySide import QtGui,QtWebKit
a = QtGui.qApp
mw = a.activeWindow()
v = mw.findChild(QtWebKit.QWebFrame)
html = unicode(v.toHtml())
print( html)
Retrieve the coordinates of 3 selected points or objects
# -*- coding: utf-8 -*-
# the line above to put the accentuated in the remarks
# If this line is missing, an error will be returned
# extract and use the coordinates of 3 objects selected
import Part, FreeCAD, math, PartGui, FreeCADGui
from FreeCAD import Base, Console
sel = FreeCADGui.Selection.getSelection() # " sel " contains the items selected
if len(sel)!=3 :
# If there are no 3 objects selected, an error is displayed in the report view
# The \r and \n at the end of line mean return and the newline CR + LF.
Console.PrintError("Select 3 points exactly\r\n")
else :
points=[]
for obj in sel:
points.append(obj.Shape.BoundBox.Center)
for pt in points:
# display of the coordinates in the report view
Console.PrintMessage(str(pt.x)+"\r\n")
Console.PrintMessage(str(pt.y)+"\r\n")
Console.PrintMessage(str(pt.z)+"\r\n")
Console.PrintMessage(str(pt[1]) + "\r\n")
List all objects
# -*- coding: utf-8 -*-
import FreeCAD,Draft
# List all objects of the document
doc = FreeCAD.ActiveDocument
objs = FreeCAD.ActiveDocument.Objects
#App.Console.PrintMessage(str(objs) + "\n")
#App.Console.PrintMessage(str(len(FreeCAD.ActiveDocument.Objects)) + " Objects" + "\n")
for obj in objs:
a = obj.Name # list the Name of the object (not modifiable)
b = obj.Label # list the Label of the object (modifiable)
try:
c = obj.LabelText # list the LabeText of the text (modifiable)
App.Console.PrintMessage(str(a) +" "+ str(b) +" "+ str(c) + "\n") # Displays the Name the Label and the text
except:
App.Console.PrintMessage(str(a) +" "+ str(b) + "\n") # Displays the Name and the Label of the object
#doc.removeObject("Box") # Clears the designated object
List the dimensions of an object, given its name
for edge in FreeCAD.ActiveDocument.MyObjectName.Shape.Edges: # replace "MyObjectName" for list
print( edge.Length)
Function resident with the mouse click action
Here with SelObserver on a object select
# -*- coding: utf-8 -*-
# causes an action to the mouse click on an object
# This function remains resident (in memory) with the function "addObserver(s)"
# "removeObserver(s) # Uninstalls the resident function
class SelObserver:
def setPreselection(self,doc,obj,sub): # Preselection object
App.Console.PrintMessage(str(sub)+ "\n") # The part of the object name
def addSelection(self,doc,obj,sub,pnt): # Selection object
App.Console.PrintMessage("addSelection"+ "\n")
App.Console.PrintMessage(str(doc)+ "\n") # Name of the document
App.Console.PrintMessage(str(obj)+ "\n") # Name of the object
App.Console.PrintMessage(str(sub)+ "\n") # The part of the object name
App.Console.PrintMessage(str(pnt)+ "\n") # Coordinates of the object
App.Console.PrintMessage("______"+ "\n")
def removeSelection(self,doc,obj,sub): # Remove the selection
App.Console.PrintMessage("removeSelection"+ "\n")
def setSelection(self,doc): # Set selection
App.Console.PrintMessage("setSelection"+ "\n")
def clearSelection(self,doc): # If click on the screen, clear the selection
App.Console.PrintMessage("clearSelection"+ "\n") # If click on another object, clear the previous object
s =SelObserver()
FreeCADGui.Selection.addObserver(s) # install the function mode resident
#FreeCADGui.Selection.removeObserver(s) # Uninstall the resident function
Other example with ViewObserver on a object select or view
App.newDocument()
v=Gui.activeDocument().activeView()
#This class logs any mouse button events. As the registered callback function fires twice for 'down' and
#'up' events we need a boolean flag to handle this.
class ViewObserver:
def __init__(self, view):
self.view = view
def logPosition(self, info):
down = (info["State"] == "DOWN")
pos = info["Position"]
if (down):
FreeCAD.Console.PrintMessage("Clicked on position: ("+str(pos[0])+", "+str(pos[1])+")\n")
pnt = self.view.getPoint(pos)
FreeCAD.Console.PrintMessage("World coordinates: " + str(pnt) + "\n")
info = self.view.getObjectInfo(pos)
FreeCAD.Console.PrintMessage("Object info: " + str(info) + "\n")
o = ViewObserver(v)
c = v.addEventCallback("SoMouseButtonEvent",o.logPosition)
Display the active document
class DocObserver: # document Observer
def slotActivateDocument(self,doc):
print(doc.Name)
obs=DocObserver()
App.addDocumentObserver(obs)
#App.removeDocumentObserver(obs) # desinstalle la fonction residente
To remove the observer call:
App.removeDocumentObserver(obs) # desinstalle la fonction residente
Find/select all elements below the cursor
from pivy import coin
import FreeCADGui
def mouse_over_cb( event_callback):
event = event_callback.getEvent()
pos = event.getPosition().getValue()
listObjects = FreeCADGui.ActiveDocument.ActiveView.getObjectsInfo((int(pos[0]),int(pos[1])))
obj = []
if listObjects:
FreeCAD.Console.PrintMessage("\n *** Objects under mouse pointer ***")
for o in listObjects:
label = str(o["Object"])
if not label in obj:
obj.append(label)
FreeCAD.Console.PrintMessage("\n"+str(obj))
view = FreeCADGui.ActiveDocument.ActiveView
mouse_over = view.addEventCallbackPivy( coin.SoLocation2Event.getClassTypeId(), mouse_over_cb )
# to remove Callback :
#view.removeEventCallbackPivy( coin.SoLocation2Event.getClassTypeId(), mouse_over)
####
#The easy way is probably to use FreeCAD's selection.
#FreeCADGui.ActiveDocument.ActiveView.getObjectsInfo(mouse_coords)
####
#you get that kind of result :
#'Document': 'Unnamed', 'Object': 'Box', 'Component': 'Face2', 'y': 8.604081153869629, 'x': 21.0, 'z': 8.553047180175781
####
#You can use this data to add your element to FreeCAD's selection :
#FreeCADGui.Selection.addSelection(FreeCAD.ActiveDocument.Box,'Face2',21.0,8.604081153869629,8.553047180175781)
List the components of an object
This function list the components of an object and extracts:
- this object its XYZ coordinates,
- its edges and their lengths center of mass and coordinates
- its faces and their center of mass
- its faces and their surfaces and coordinates
# -*- coding: utf-8 -*-
# This function list the components of an object
# and extract this object its XYZ coordinates,
# its edges and their lengths center of mass and coordinates
# its faces and their center of mass
# its faces and their surfaces and coordinates
# 8/05/2014
import Draft,Part
def detail():
sel = FreeCADGui.Selection.getSelection() # Select an object
if len(sel) != 0: # If there is a selection then
Vertx=[]
Edges=[]
Faces=[]
compt_V=0
compt_E=0
compt_F=0
pas =0
perimetre = 0.0
EdgesLong = []
# Displays the "Name" and the "Label" of the selection
App.Console.PrintMessage("Selection > " + str(sel[0].Name) + " " + str(sel[0].Label) +"\n"+"\n")
for j in enumerate(sel[0].Shape.Edges): # Search the "Edges" and their lengths
compt_E+=1
Edges.append("Edge%d" % (j[0]+1))
EdgesLong.append(str(sel[0].Shape.Edges[compt_E-1].Length))
perimetre += (sel[0].Shape.Edges[compt_E-1].Length) # calculates the perimeter
# Displays the "Edge" and its length
App.Console.PrintMessage("Edge"+str(compt_E)+" Length > "+str(sel[0].Shape.Edges[compt_E-1].Length)+"\n")
# Displays the "Edge" and its center mass
App.Console.PrintMessage("Edge"+str(compt_E)+" Center > "+str(sel[0].Shape.Edges[compt_E-1].CenterOfMass)+"\n")
num = sel[0].Shape.Edges[compt_E-1].Vertexes[0]
Vertx.append("X1: "+str(num.Point.x))
Vertx.append("Y1: "+str(num.Point.y))
Vertx.append("Z1: "+str(num.Point.z))
# Displays the coordinates 1
App.Console.PrintMessage("X1: "+str(num.Point[0])+" Y1: "+str(num.Point[1])+" Z1: "+str(num.Point[2])+"\n")
try:
num = sel[0].Shape.Edges[compt_E-1].Vertexes[1]
Vertx.append("X2: "+str(num.Point.x))
Vertx.append("Y2: "+str(num.Point.y))
Vertx.append("Z2: "+str(num.Point.z))
except:
Vertx.append("-")
Vertx.append("-")
Vertx.append("-")
# Displays the coordinates 2
App.Console.PrintMessage("X2: "+str(num.Point[0])+" Y2: "+str(num.Point[1])+" Z2: "+str(num.Point[2])+"\n")
App.Console.PrintMessage("\n")
App.Console.PrintMessage("Perimeter of the form : "+str(perimetre)+"\n")
App.Console.PrintMessage("\n")
FacesSurf = []
for j in enumerate(sel[0].Shape.Faces): # Search the "Faces" and their surface
compt_F+=1
Faces.append("Face%d" % (j[0]+1))
FacesSurf.append(str(sel[0].Shape.Faces[compt_F-1].Area))
# Displays 'Face' and its surface
App.Console.PrintMessage("Face"+str(compt_F)+" > Surface "+str(sel[0].Shape.Faces[compt_F-1].Area)+"\n")
# Displays 'Face' and its CenterOfMass
App.Console.PrintMessage("Face"+str(compt_F)+" > Center "+str(sel[0].Shape.Faces[compt_F-1].CenterOfMass)+"\n")
# Displays 'Face' and its Coordinates
FacesCoor = []
fco = 0
for f0 in sel[0].Shape.Faces[compt_F-1].Vertexes: # Search the Vertexes of the face
fco += 1
FacesCoor.append("X"+str(fco)+": "+str(f0.Point.x))
FacesCoor.append("Y"+str(fco)+": "+str(f0.Point.y))
FacesCoor.append("Z"+str(fco)+": "+str(f0.Point.z))
# Displays 'Face' and its Coordinates
App.Console.PrintMessage("Face"+str(compt_F)+" > Coordinate"+str(FacesCoor)+"\n")
# Displays 'Face' and its Volume
App.Console.PrintMessage("Face"+str(compt_F)+" > Volume "+str(sel[0].Shape.Faces[compt_F-1].Volume)+"\n")
App.Console.PrintMessage("\n")
# Displays the total surface of the form
App.Console.PrintMessage("Surface of the form : "+str(sel[0].Shape.Area)+"\n")
# Displays the total Volume of the form
App.Console.PrintMessage("Volume of the form : "+str(sel[0].Shape.Volume)+"\n")
detail()
List the PropertiesList
import FreeCADGui
from FreeCAD import Console
o = App.ActiveDocument.ActiveObject
op = o.PropertiesList
for p in op:
Console.PrintMessage("Property: "+ str(p)+ " Value: " + str(o.getPropertyByName(p))+"\r\n")
Add a single Property Comment
import Draft
obj = FreeCADGui.Selection.getSelection()[0]
obj.addProperty("App::PropertyString","GComment","Draft","Font name").GComment = "Comment here"
App.activeDocument().recompute()
Search and data extraction
Examples of research and decoding information on an object.
Each section is independently and is separated by "############" can be copied directly into the Python console, or in a macro or use this macro. The description of the macro in the commentary.
Displaying it in the "Report View" window (View > Views > Report view)
# -*- coding: utf-8 -*-
from __future__ import unicode_literals
# Exemples de recherche et de decodage d'informations sur un objet
# Chaque section peut etre copiee directement dans la console Python ou dans une macro ou utilisez la macro tel quel
# Certaines commandes se repetent seul l'approche est differente
# L'affichage se fait dans la Vue rapport : Menu Affichage > Vues > Vue rapport
#
# Examples of research and decoding information on an object
# Each section can be copied directly into the Python console, or in a macro or uses this macro
# Certain commands as repeat alone approach is different
# Displayed in Report view: View > Views > report view
#
# rev:30/08/2014:29/09/2014:17/09/2015 22/11/2019 30/12/2022
from FreeCAD import Base
import DraftVecUtils, Draft, Part
##################################################################################
# info in the object
box = App.ActiveDocument.getObject('Box') # object
####
print(dir(box)) # all options disponible in the object
####
print(box.Name) # object name
####
print(box.Content) # content of the object in XML format
##################################################################################
#
# example of using the information listed
#
# search the name of the active document
mydoc = FreeCAD.activeDocument().Name # Name of active Document
App.Console.PrintMessage("Active docu : "+(mydoc)+"\n")
##################################################################################
# search the document name and the name of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
object_FullName = sel[0].FullName # file Name and Name of the object selected
App.Console.PrintMessage("object_FullName: "+(object_FullName)+"\n")
##################################################################################
# search the label of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
object_Label = sel[0].Label # Label of the object (modifiable)
App.Console.PrintMessage("object_Label : "+(object_Label)+"\n")
##################################################################################
#TypeID object FreeCAD selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
App.Console.PrintMessage("sel : "+str(sel[0])+"\n\n") # sel[0] first object selected
##################################################################################
# search the Name of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
object_Name = sel[0].Name # Name of the object (not modifiable)
App.Console.PrintMessage("object_Name : "+str(object_Name)+"\n\n")
##################################################################################
# search the Sub Element Name of the sub object selected
try:
SubElement = FreeCADGui.Selection.getSelectionEx() # sub element name with getSelectionEx()
element_ = SubElement[0].SubElementNames[0] # name of 1 element selected
App.Console.PrintMessage("elementSelec : "+str(element_)+"\n\n")
except:
App.Console.PrintMessage("Oups"+"\n\n")
##################################################################################
# give the length of the subObject selected
SubElementLength = Gui.Selection.getSelectionEx()[0].SubObjects[0].Length # sub element or element name with getSelectionEx()
App.Console.PrintMessage("SubElement length: "+str(SubElementLength)+"\n")# length
##################################################################################
# list the edges and the coordinates of the object[0] selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
i = 0
for j in enumerate(sel[0].Shape.Edges): # list all Edges
i += 1
App.Console.PrintMessage("Edges n : "+str(i)+"\n")
a = sel[0].Shape.Edges[j[0]].Vertexes[0]
App.Console.PrintMessage("X1 : "+str(a.Point.x)+"\n") # coordinate XYZ first point
App.Console.PrintMessage("Y1 : "+str(a.Point.y)+"\n") #
App.Console.PrintMessage("Z1 : "+str(a.Point.z)+"\n") #
try:
a = sel[0].Shape.Edges[j[0]].Vertexes[1]
App.Console.PrintMessage("X2 : "+str(a.Point.x)+"\n") # coordinate XYZ second point
App.Console.PrintMessage("Y2 : "+str(a.Point.y)+"\n") #
App.Console.PrintMessage("Z2 : "+str(a.Point.z)+"\n") #
except:
App.Console.PrintMessage("Oups"+"\n")
App.Console.PrintMessage("\n")
##################################################################################
# give the sub element name, length, coordinates, BoundBox, BoundBox.Center, Area of the SubObjects selected
try:
SubElement = FreeCADGui.Selection.getSelectionEx() # sub element name with getSelectionEx()
subElementName = Gui.Selection.getSelectionEx()[0].SubElementNames[0] # sub element name with getSelectionEx()
App.Console.PrintMessage("subElementName : "+str(subElementName)+"\n")
subObjectLength = Gui.Selection.getSelectionEx()[0].SubObjects[0].Length # sub element Length
App.Console.PrintMessage("subObjectLength: "+str(subObjectLength)+"\n\n")
subObjectX1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.x # sub element coordinate X1
App.Console.PrintMessage("subObject_X1 : "+str(subObjectX1)+"\n")
subObjectY1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.y # sub element coordinate Y1
App.Console.PrintMessage("subObject_Y1 : "+str(subObjectY1)+"\n")
subObjectZ1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.z # sub element coordinate Z1
App.Console.PrintMessage("subObject_Z1 : "+str(subObjectZ1)+"\n\n")
try:
subObjectX2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.x # sub element coordinate X2
App.Console.PrintMessage("subObject_X2 : "+str(subObjectX2)+"\n")
subObjectY2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.y # sub element coordinate Y2
App.Console.PrintMessage("subObject_Y2 : "+str(subObjectY2)+"\n")
subObjectZ2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.z # sub element coordinate Z2
App.Console.PrintMessage("subObject_Z2 : "+str(subObjectZ2)+"\n\n")
except:
App.Console.PrintMessage("Oups"+"\n\n")
subObjectBoundBox = Gui.Selection.getSelectionEx()[0].SubObjects[0].BoundBox # sub element BoundBox coordinates
App.Console.PrintMessage("subObjectBBox : "+str(subObjectBoundBox)+"\n")
subObjectBoundBoxCenter = Gui.Selection.getSelectionEx()[0].SubObjects[0].BoundBox.Center # sub element BoundBoxCenter
App.Console.PrintMessage("subObjectBBoxCe: "+str(subObjectBoundBoxCenter)+"\n")
surfaceFace = Gui.Selection.getSelectionEx()[0].SubObjects[0].Area # Area of the face selected
App.Console.PrintMessage("surfaceFace : "+str(surfaceFace)+"\n\n")
except:
App.Console.PrintMessage("Oups"+"\n\n")
##################################################################################
# give the area of the object
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
surface = sel[0].Shape.Area # Area object complete
App.Console.PrintMessage("surfaceObjet : "+str(surface)+"\n\n")
##################################################################################
# give the Center Of Mass and coordinates of the object
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
CenterOfMass = sel[0].Shape.CenterOfMass # Center of Mass of the object
App.Console.PrintMessage("CenterOfMass : "+str(CenterOfMass)+"\n")
App.Console.PrintMessage("CenterOfMassX : "+str(CenterOfMass[0])+"\n") # coordinates [0]=X [1]=Y [2]=Z
App.Console.PrintMessage("CenterOfMassY : "+str(CenterOfMass[1])+"\n") # or CenterOfMass.x, CenterOfMass.y, CenterOfMass.z
App.Console.PrintMessage("CenterOfMassZ : "+str(CenterOfMass[2])+"\n\n")
##################################################################################
# list the all faces of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
for j in enumerate(sel[0].Shape.Faces): # List alles faces of the object
App.Console.PrintMessage("Face : "+str("Face%d" % (j[0]+1))+"\n")
App.Console.PrintMessage("\n\n")
##################################################################################
# give the volume of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
volume_ = sel[0].Shape.Volume # Volume of the object
App.Console.PrintMessage("volume_ : "+str(volume_)+"\n\n")
##################################################################################
# give the BoundBox of the oject selected all type
objs = FreeCADGui.Selection.getSelection() # select object with getSelection()
if len(objs) >= 1: # serch the object type
if hasattr(objs[0], "Shape"):
s = objs[0].Shape
elif hasattr(objs[0], "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331
s = objs[0].Mesh
elif hasattr(objs[0], "Points"):
s = objs[0].Points
boundBox_= s.BoundBox # BoundBox of the object
App.Console.PrintMessage("boundBox_ : "+str(boundBox_)+"\n") #
boundBoxLX = boundBox_.XLength # Length x boundBox rectangle
boundBoxLY = boundBox_.YLength # Length y boundBox rectangle
boundBoxLZ = boundBox_.ZLength # Length z boundBox rectangle
boundBoxXMin = boundBox_.XMin # coordonate XMin
boundBoxYMin = boundBox_.YMin # coordonate YMin
boundBoxZMin = boundBox_.ZMin # coordonate ZMin
boundBoxXMax = boundBox_.XMax # coordonate XMax
boundBoxYMax = boundBox_.YMax # coordonate YMax
boundBoxZMax = boundBox_.ZMax # coordonate ZMax
boundBoxDiag= boundBox_.DiagonalLength # Diagonal Length boundBox rectangle
boundBoxCenter = boundBox_.Center # BoundBox Center
boundBoxCenterOfGravity = boundBox_.CenterOfGravity # BoundBox CenterOfGravity
App.Console.PrintMessage("boundBoxLX : "+str(boundBoxLX)+"\n")
App.Console.PrintMessage("boundBoxLY : "+str(boundBoxLY)+"\n")
App.Console.PrintMessage("boundBoxLZ : "+str(boundBoxLZ)+"\n\n")
App.Console.PrintMessage("boundBoxXMin : "+str(boundBoxXMin)+"\n")
App.Console.PrintMessage("boundBoxYMin : "+str(boundBoxYMin)+"\n")
App.Console.PrintMessage("boundBoxZMin : "+str(boundBoxZMin)+"\n")
App.Console.PrintMessage("boundBoxXMax : "+str(boundBoxXMax)+"\n")
App.Console.PrintMessage("boundBoxYMax : "+str(boundBoxYMax)+"\n")
App.Console.PrintMessage("boundBoxZMax : "+str(boundBoxZMax)+"\n\n")
App.Console.PrintMessage("boundBoxDiag : "+str(boundBoxDiag)+"\n")
App.Console.PrintMessage("boundBoxCenter : "+str(boundBoxCenter)+"\n")
App.Console.PrintMessage("boundBox Center of Gravity : "+str(boundBoxCenterOfGravity )+"\n\n")
##################################################################################
# give the complete placement of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
pl = sel[0].Shape.Placement # Placement Vector XYZ and Yaw-Pitch-Roll
App.Console.PrintMessage("Placement : "+str(pl)+"\n")
##################################################################################
# give the placement Base (xyz) of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
pl = sel[0].Shape.Placement.Base # Placement Vector XYZ
App.Console.PrintMessage("PlacementBase : "+str(pl)+"\n\n")
##################################################################################
# give the placement Base (xyz) of the object selected
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
oripl_X = sel[0].Placement.Base[0] # decode Placement X
oripl_Y = sel[0].Placement.Base[1] # decode Placement Y
oripl_Z = sel[0].Placement.Base[2] # decode Placement Z
# same
#oripl_X = sel[0].Placement.Base.x # decode Placement X
#oripl_Y = sel[0].Placement.Base.y # decode Placement Y
#oripl_Z = sel[0].Placement.Base.z # decode Placement Z
App.Console.PrintMessage("oripl_X : "+str(oripl_X)+"\n")
App.Console.PrintMessage("oripl_Y : "+str(oripl_Y)+"\n")
App.Console.PrintMessage("oripl_Z : "+str(oripl_Z)+"\n\n")
##################################################################################
# give the placement rotation of the object selected (x, y, z, angle rotation)
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
rotation = sel[0].Placement.Rotation # decode Placement Rotation
App.Console.PrintMessage("rotation : "+str(rotation)+"\n\n")
##################################################################################
# give the placement rotation of the object selected (x, y, z, angle rotation)
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
pl = sel[0].Shape.Placement.Rotation # decode Placement Rotation other method
App.Console.PrintMessage("Placement Rot : "+str(pl)+"\n\n")
##################################################################################
# give the rotation of the object selected (angle rotation)
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
pl = sel[0].Shape.Placement.Rotation.Angle # decode Placement Rotation Angle
App.Console.PrintMessage("Placement Rot Angle : "+str(pl)+"\n\n")
##################################################################################
# give the rotation.Q of the object selected (angle rotation in Radian) for convert: math.degrees(angleInRadian)
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
Rot = sel[0].Placement.Rotation.Q # Placement Rotation Q
App.Console.PrintMessage("Rot : "+str(Rot)+ "\n")
Rot_0 = sel[0].Placement.Rotation.Q[0] # decode Placement Rotation Q
App.Console.PrintMessage("Rot_0 : "+str(Rot_0)+ " rad , "+str(180 * Rot_0 / 3.1416)+" deg "+"\n") # or math.degrees(angle)
Rot_1 = sel[0].Placement.Rotation.Q[1] # decode Placement Rotation 1
App.Console.PrintMessage("Rot_1 : "+str(Rot_1)+ " rad , "+str(180 * Rot_1 / 3.1416)+" deg "+"\n") # or math.degrees(angle)
Rot_2 = sel[0].Placement.Rotation.Q[2] # decode Placement Rotation 2
App.Console.PrintMessage("Rot_2 : "+str(Rot_2)+ " rad , "+str(180 * Rot_2 / 3.1416)+" deg "+"\n") # or math.degrees(angle)
Rot_3 = sel[0].Placement.Rotation.Q[3] # decode Placement Rotation 3
App.Console.PrintMessage("Rot_3 : "+str(Rot_3)+"\n\n")
Rot_Axis = sel[0].Placement.Rotation.Axis # Placement Rotation .Axis
App.Console.PrintMessage("Rot_Axis : "+str(Rot_Axis)+ "\n")
Rot_Angle = sel[0].Placement.Rotation.Angle # Placement Rotation .Angle
App.Console.PrintMessage("Rot_Angle : "+str(Rot_Angle)+ "\n\n")
##################################################################################
# give the rotation of the object selected toEuler (angle rotation in degrees)
sel = FreeCADGui.Selection.getSelection() # select object with getSelection()
angle = sel[0].Shape.Placement.Rotation.toEuler() # angle Euler
App.Console.PrintMessage("Angle : "+str(angle)+"\n")
Yaw = sel[0].Shape.Placement.Rotation.toEuler()[0] # decode angle Euler Yaw (Z) lacet (alpha)
App.Console.PrintMessage("Yaw : "+str(Yaw)+"\n")
Pitch = sel[0].Shape.Placement.Rotation.toEuler()[1] # decode angle Euler Pitch (Y) tangage (beta)
App.Console.PrintMessage("Pitch : "+str(Pitch)+"\n")
Roll = sel[0].Shape.Placement.Rotation.toEuler()[2] # decode angle Euler Roll (X) roulis (gamma)
App.Console.PrintMessage("Roll : "+str(Roll)+"\n\n")
rot = App.Rotation()
rot.setYawPitchRoll(45,45,0)
print("Angle: ", rot.Angle)
print("Axis: ", rot.Axis)
print("RawAxis: ", rot.RawAxis)
print("YawPitchRoll: ", rot.getYawPitchRoll())
print("Rotation: ", rot)
print("Quaternion: ", rot.Q)
##################################################################################
# find Midpoint of the selected line
import Draft, DraftGeomUtils
sel = FreeCADGui.Selection.getSelection()
vecteur = DraftGeomUtils.findMidpoint(sel[0].Shape.Edges[0]) # find Midpoint
App.Console.PrintMessage(vecteur)
Draft.makePoint(vecteur)
##################################################################################
Manual search of an element with label
# Extract the coordinate X,Y,Z and Angle giving the label (here "Cylindre")
App.Console.PrintMessage("Base.x : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.x)+"\n")
App.Console.PrintMessage("Base.y : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.y)+"\n")
App.Console.PrintMessage("Base.z : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.z)+"\n")
App.Console.PrintMessage("Base.Angle : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Rotation.Angle)+"\n\n")
##################################################################################
Note: Usually the angles are given in Radian. To convert them:
- angle in Degrees to Radians :
- Angle in radian = pi * (angle in degree) / 180
- Angle in radian = math.radians(angle in degree)
- angle in Radians to Degrees :
- Angle in degree = 180 * (angle in radian) / pi
- Angle in degree = math.degrees(angle in radian)
Cartesian coordinates
This code displays the Cartesian coordinates of the selected item.
Change the value of "numberOfPoints" if you want a different number of points (precision)
numberOfPoints = 100 # Decomposition number (or precision you can change)
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy() # select one element
points = selectedEdge.discretize(numberOfPoints) # discretize the element
i=0
for p in points: # list and display the coordinates
i+=1
print( i, " X", p.x, " Y", p.y, " Z", p.z)
Other method display on "Int" and "Float"
import Part
from FreeCAD import Base
c=Part.makeCylinder(2,10) # create the circle
Part.show(c) # display the shape
# slice accepts two arguments:
#+ the normal of the cross section plane
#+ the distance from the origin to the cross section plane. Here you have to find a value so that the plane intersects your object
s=c.slice(Base.Vector(0,1,0),0) #
# here the result is a single wire
# depending on the source object this can be several wires
s=s[0]
# if you only need the vertexes of the shape you can use
v=[]
for i in s.Vertexes:
v.append(i.Point)
# but you can also sub-sample the section to have a certain number of points (int) ...
p1=s.discretize(20)
ii=0
for i in p1:
ii+=1
print( i ) # Vector()
print( ii, ": X:", i.x, " Y:", i.y, " Z:", i.z ) # Vector decode
Draft.makeWire(p1,closed=False,face=False,support=None) # to see the difference accuracy (20)
## uncomment to use
#import Draft
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # first transform the DWire in Wire "downgrade"
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # second split the Wire in single objects "downgrade"
#
##Draft.upgrade(FreeCADGui.Selection.getSelection(),delete=True) # to attach lines contiguous SELECTED use "upgrade"
# ... or define a sampling distance (float)
p2=s.discretize(0.5)
ii=0
for i in p2:
ii+=1
print( i ) # Vector()
print( ii, ": X:", i.x, " Y:", i.y, " Z:", i.z ) # Vector decode
Draft.makeWire(p2,closed=False,face=False,support=None) # to see the difference accuracy (0.5)
## uncomment to use
#import Draft
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # first transform the DWire in Wire "downgrade"
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True) # second split the Wire in single objects "downgrade"
#
##Draft.upgrade(FreeCADGui.Selection.getSelection(),delete=True) # to attach lines contiguous SELECTED use "upgrade"
Select all objects in the document
import FreeCAD
for obj in FreeCAD.ActiveDocument.Objects:
print( obj.Name ) # display the object Name
objName = obj.Name
obj = App.ActiveDocument.getObject(objName)
Gui.Selection.addSelection(obj) # select the object
Select a face of an object by Name object and Face number
# select one face of the object
import FreeCAD, Draft
App=FreeCAD
nameObject = "Box" # objet
faceSelect = "Face3" # face to selection
loch=App.ActiveDocument.getObject(nameObject) # objet
Gui.Selection.clearSelection() # clear all selection
Gui.Selection.addSelection(loch,faceSelect) # select the face specified
s = Gui.Selection.getSelectionEx()
#Draft.makeFacebinder(s) #
Get the normal vector of a face of an object by Name object and number Face (r.Q)
## normal of a face by giving the number of the face and the name of the object (rotation Q with yL, uV) = (App.Vector (x, y, z), angle))
## normal d'une face en donnant le numero de la face et le nom de l'objet (rotation Q avec yL, uV) = (App.Vector(x, y, z),angle))
from FreeCAD import Vector
numero_Face = 2 # number of the face searched (begin 0, 1, 2, 3 .....)
nomObjet = "Box" # object name
yL = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].CenterOfMass
uv = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].Surface.parameter(yL)
nv = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].normalAt(uv[0], uv[1])
direction = yL.sub(nv + yL)
print("Direction : ",direction)
r = App.Rotation(App.Vector(0,0,1),direction)
print("Rotation : ", r)
print("Rotation Q : ", r.Q)
Get the normal vector of a face of an object by Name object and number of Face
numero_Face = 2 # number of the face searched (begin 0, 1, 2, 3 .....)
nomObjet = "Box" # object name
normal = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].normalAt(0,0)
print("Face"+str(numero_Face), " : ", normal)
Get the normal vector of an object selected and number of Face
## normal of a face by giving the number of the face of the selected object
selectionObjects = FreeCADGui.Selection.getSelection()
numero_Face = 3 # numero de la face recherchee
normal = selectionObjects[0].Shape.Faces[numero_Face].normalAt(0,0)
print(normal)
# selectionne la face numerotee
Gui.Selection.clearSelection()
Gui.Selection.addSelection(selectionObjects[0],"Face"+str(numero_Face))
Get the normal vector on the surface
This example show how to find normal vector on the surface by find the u,v parameters of one point on the surface and use u,v parameters to find normal vector
def normal(self):
ss=FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy()#SubObjects[0] is the edge list
points = ss.discretize(3.0)#points on the surface edge,
#this example just use points on the edge for example.
#However point is not necessary on the edge, it can be anywhere on the surface.
face=FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1]
for pp in points:
pt=FreeCAD.Base.Vector(pp.x,pp.y,pp.z)#a point on the surface edge
uv=face.Surface.parameter(pt)# find the surface u,v parameter of a point on the surface edge
u=uv[0]
v=uv[1]
normal=face.normalAt(u,v)#use u,v to find normal vector
print( normal)
line=Part.makeLine((pp.x,pp.y,pp.z), (normal.x,normal.y,normal.z))
Part.show(line)
Get the normal vector of the face and create a line at the point mouse clicked
import PySide2
import Draft, Part, FreeCAD, FreeCADGui
import FreeCADGui as Gui
from FreeCAD import Base
FreeCAD.ActiveDocument.openTransaction("Tyty") # memorise les actions (avec annuler restore)
selectedFace = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0]
pointClick = FreeCADGui.Selection.getSelectionEx()[0].PickedPoints[0]
########## section direction
plr = FreeCAD.Placement()
yL = pointClick
uv = selectedFace.Surface.parameter(yL)
nv = direction = selectedFace.normalAt(uv[0], uv[1])
r = App.Rotation(App.Vector(0,0,1),nv)
plr.Rotation.Q = r.Q
plr.Base = pointClick
########## section direction
line = Draft.make_wire([App.Vector(0.0,0.0,0.0), App.Vector(0.0,0.0,20.0)] ) # create line
line.Placement=plr
FreeCAD.ActiveDocument.recompute()
print( "Direction (radian) : ",direction ) # direction in radian
Get the normal vector of a surface from a STL file
def getNormal(cb):
if cb.getEvent().getState() == coin.SoButtonEvent.UP:
pp = cb.getPickedPoint()
if pp:
vec = pp.getNormal().getValue()
index = coin.cast(pp.getDetail(), "SoFaceDetail").getFaceIndex()
print("Normal: {}, Face index: {}".format(str(vec), index))
from pivy import coin
meth=Gui.ActiveDocument.ActiveView.addEventCallbackPivy(coin.SoMouseButtonEvent.getClassTypeId(), getNormal)
you are done then run for quit:
Gui.ActiveDocument.ActiveView.removeEventCallbackPivy(coin.SoMouseButtonEvent.getClassTypeId(), meth)
Create one object to the position of the Camera
# create one object of the position to camera with "getCameraOrientation()"
# the object is still facing the screen
import Draft
plan = FreeCADGui.ActiveDocument.ActiveView.getCameraOrientation()
plan = str(plan)
###### extract data
a = ""
for i in plan:
if i in ("0123456789e.- "):
a+=i
a = a.strip(" ")
a = a.split(" ")
####### extract data
#print( a)
#print( a[0])
#print( a[1])
#print( a[2])
#print( a[3])
xP = float(a[0])
yP = float(a[1])
zP = float(a[2])
qP = float(a[3])
pl = FreeCAD.Placement()
pl.Rotation.Q = (xP,yP,zP,qP) # rotation of object
pl.Base = FreeCAD.Vector(0.0,0.0,0.0) # here coordinates XYZ of Object
rec = Draft.makeRectangle(length=10.0,height=10.0,placement=pl,face=False,support=None) # create rectangle
#rec = Draft.makeCircle(radius=5,placement=pl,face=False,support=None) # create circle
print( rec.Name)
here same code simplified
import Draft
pl = FreeCAD.Placement()
pl.Rotation = FreeCADGui.ActiveDocument.ActiveView.getCameraOrientation()
pl.Base = FreeCAD.Vector(0.0,0.0,0.0)
rec = Draft.makeRectangle(length=10.0,height=10.0,placement=pl,face=False,support=None)
Read And write one Expression
import Draft
doc = FreeCAD.ActiveDocument
pl=FreeCAD.Placement()
pl.Rotation.Q=(0.0,-0.0,-0.0,1.0)
pl.Base=FreeCAD.Vector(0.0,0.0,0.0)
obj = Draft.makeCircle(radius=1.0,placement=pl,face=False,support=None) # create circle
print( obj.PropertiesList ) # properties disponible in the obj
doc.getObject(obj.Name).setExpression('Radius', u'2mm') # modify the radius
doc.getObject(obj.Name).setExpression('Placement.Base.x', u'10mm') # modify the placement
doc.getObject(obj.Name).setExpression('FirstAngle', u'90') # modify the first angle
doc.recompute()
expressions = obj.ExpressionEngine # read the expression list
print( expressions)
for i in expressions: # list and separate the data expression
print( i[0]," = ",i[1])
Create a Sketch on a Surface in PartDesign
This snippet can be useful, if you want to create a sketch on a surface in PartDesign from inside a macro. Note, that body might be None, if no active body is selected and that the Selection might be empty.
body = Gui.ActiveDocument.ActiveView.getActiveObject('pdbody')
first_selection = Gui.Selection.getSelectionEx()[0]
feature = first_selection.Object
face_name = first_selection.SubElementNames[0]
sketch = App.ActiveDocument.addObject('Sketcher::SketchObject','MySketch')
body.addObject(sketch)
sketch.MapMode = 'FlatFace'
sketch.Support = (feature, face_name)
App.ActiveDocument.recompute()
How to Simulate a Mouse Click at a given Coordinate
The position is relative to the GL widget. See forum thread.
from PySide2 import QtCore
from PySide2 import QtGui
from PySide2 import QtWidgets
mw = Gui.getMainWindow()
gl = mw.findChild(QtWidgets.QOpenGLWidget)
me = QtGui.QMouseEvent(QtCore.QEvent.MouseButtonRelease, QtCore.QPoint(800,300), QtCore.Qt.LeftButton, QtCore.Qt.LeftButton, QtCore.Qt.NoModifier)
app = QtWidgets.QApplication.instance()
app.sendEvent(gl, me)
If you have a 3d point and want to get the 2d point on the opengl widget then use this:
from PySide2 import QtCore
from PySide2 import QtGui
from PySide2 import QtWidgets
from FreeCAD import Base
x, y, z, = 10,10,10
v = Gui.ActiveDocument.ActiveView
point3d = Base.Vector(x, y, z)
point2d = v.getPointOnScreen(point3d)
size = v.getSize()
coordX = point2d[0]
coordY = size[1] - point2d[1]
me = QtGui.QMouseEvent(QtCore.QEvent.MouseButtonRelease, QtCore.QPoint(coordX,coordY), QtCore.Qt.LeftButton, QtCore.Qt.LeftButton, QtCore.Qt.NoModifier)
How to create a face with holes using Python API
This snippet demonstrates how to create a face with internal holes through the Python API. See forum thread.
import FreeCAD, Part
# Create poles that will define the Face
pts = [(-2, 2, 0),
(0, 2, 1),
(2, 2, 0),
(2, -2, 0),
(0, -2, 1),
(-2, -2, 0)]
bs = Part.BSplineCurve()
bs.buildFromPoles(pts, True) # True makes this periodic/closed
# Make the Face from the curve
myFace = Part.makeFilledFace([bs.toShape()])
# Create geometry for holes that will be cut in the surface
hole0 = Part.Geom2d.Circle2d(FreeCAD.Base.Vector2d(0,0), 1.0)
hole1 = Part.Geom2d.Circle2d(FreeCAD.Base.Vector2d(0,1.5), 0.1)
edge0 = hole0.toShape(myFace)
edge1 = hole1.toShape(myFace)
wireb = Part.Wire(bs.toShape())
wire0 = Part.Wire(edge0)
wire1 = Part.Wire(edge1)
# Cut holes in the face
myFace.cutHoles([wire0])
myFace.validate() # This is required
myFace.cutHoles([wire1])
myFace.validate()
Part.show(myFace)
Close and restart FreeCAD
import PySide2
from PySide2 import QtWidgets, QtCore, QtGui
def restart_freecad():
"""Shuts down and restarts FreeCAD"""
args = QtWidgets.QApplication.arguments()[1:]
if FreeCADGui.getMainWindow().close():
QtCore.QProcess.startDetached(
QtWidgets.QApplication.applicationFilePath(), args
)
Coin3D
See Coin3d snippets
Related
- FreeCAD scripting: Python, Introduction to Python, Python scripting tutorial, FreeCAD Scripting Basics
- Modules: Builtin modules, Units, Quantity
- Workbenches: Workbench creation, Gui Commands, Commands, Installing more workbenches
- Meshes and Parts: Mesh Scripting, Topological data scripting, Mesh to Part, PythonOCC
- Parametric objects: Scripted objects, Viewproviders (Custom icon in tree view)
- Scenegraph: Coin (Inventor) scenegraph, Pivy
- Graphical interface: Interface creation, Interface creation completely in Python (1, 2, 3, 4, 5), PySide, PySide examples beginner, intermediate, advanced
- Macros: Macros, How to install macros
- Embedding: Embedding FreeCAD, Embedding FreeCADGui
- Other: Expressions, Code snippets, Line drawing function, FreeCAD vector math library (deprecated)
- Hubs: User hub, Power users hub, Developer hub