Assembly3 ConstraintPointsCoincident

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:

Perpendicular

Point on plane

Assembly3

Menu location
Assembly3 ConstraintPointsCoincident
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool builds a link between two objects of an assembly and fixes the distance between them and the orientation to each other. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following object is moved to a position where both ICSs' origins are in the same place.

Point elements have no stretch in any direction (zero length) and so there's no orientation detectable i.e. their ICS are only to match other elements' settings. The orientation of the ICSs always stays the same as the global coordinate system's orientation and can not be used to reduce any degrees of freedom related to rotation.

Related to the first object the following object can still spin around the origin (around all three axes). This is leaving 3 degrees of freedom (DOFs) for each link unconstrained.