Escadas

From FreeCAD Documentation
Revision as of 22:13, 21 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Arch Stairs

Veja também
Arch → Stairs
Bancadas de trabalho
Arch
Atalho padrão
S R
Introduzido na versão
0.14
Veja também
Arch Structure, Arch Equipment

Description

The Arch Stairs tool allows you to build automatically several types of stairs. At the moment, only straight stairs (with or without a central landing) are supported. Stairs can be built from scratch, or from a straight line, in which case the stairs follow the line. If the line is not horizontal but has a vertical inclination, the stairs will also follow its slope.

See the Stairs entry in wikipedia for a definition of the different terms used to describe parts of stairs.

Two constructed stairs, one with a massive structure and a landing, and another one with a single stringer.

Options

Usage

  1. Press the Arch Stairs button, or press S, R keys.
  2. Adjust the desired properties. Some parts of the stairs, such as the structure, might not appear immediately, if any of the properties makes it impossible, such as a structure thickness of 0.

Properties

Base

  • DadosAlign: The alignment of these stairs on their baseline, if applicable.
  • DadosBase: The baseline of these stairs, if any.
  • DadosHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
  • DadosLength: The total length of these stairs if no baseline is defined.
  • DadosWidth: The width of these stairs.

Steps

  • DadosNosing: The size of the nosing.
  • DadosNumber of Steps: The numbers of steps (risers) in these stairs.
  • DadosRiser Height: The height of the risers.
  • DadosTread Depth: The depth of the treads.
  • DadosTread Thickness: The thickness of the treads.

Structure

  • DadosLandings: The type of landings.
  • DadosStringer Offset: The offset between the border of the stairs and the structure.
  • DadosStringer Width: The width of the stringers.
  • DadosStructure: The type of structure of these stairs.
  • DadosStructure Thickness: The thickness of the structure.
  • DadosWinders: The type of winders.

Limitations

Scripting

See also: Arch API and FreeCAD Scripting Basics.

The Stairs tool can be used in macros and from the Python console by using the following function:

Stairs = makeStairs(baseobj=None, length=None, width=None, height=None, steps=None, name="Stairs")
  • Creates a Stairs object from the given baseobj.
  • If baseobj is not given, it will use length, width, height, and steps, to build a solid object.

Example:

import Arch

Stairs = Arch.makeStairs(length=5000, width=1200, height=3000, steps=14)