Reinforcement StirrupRebar/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Category:Reinforcement/ro")
(Updating to match new version of source page)
Line 1: Line 1:
<languages/>
<languages/>
<div class="mw-translate-fuzzy">
{{docnav/ro|[[Arch_Rebar_BentShape/ro|Bent Shape Rebar]]|[[Arch_Rebar_Helical/ro|Helical Rebar]]|[[Arch_Module/ro|Arch]]|IconL=Arch_Rebar_BentShape.svg |IconC=Workbench_Arch.svg |IconR=Arch_Rebar_Helical.svg}}
{{docnav/ro|[[Arch_Rebar_BentShape/ro|Bent Shape Rebar]]|[[Arch_Rebar_Helical/ro|Helical Rebar]]|[[Arch_Module/ro|Arch]]|IconL=Arch_Rebar_BentShape.svg |IconC=Workbench_Arch.svg |IconR=Arch_Rebar_Helical.svg}}
</div>


<div class="mw-translate-fuzzy">
{{GuiCommand/ro
{{GuiCommand/ro
|Name/ro=Arch Rebar Stirrup
|Name/ro=Arch Rebar Stirrup
Line 9: Line 12:
|Version=0.17
|Version=0.17
}}
}}
</div>


==Descriere==
==Descriere==
Line 17: Line 21:
</div>
</div>


This command is part of the [[Reinforcement Addon]], that you can install with the [[Addon Manager]], via the menu {{MenuCommand|Tools → Addon manager → Reinforcement}}.
This command is part of the [[Reinforcement Addon|Reinforcement Addon]], that you can install with the [[Addon Manager|Addon Manager]], via the menu {{MenuCommand|Tools → Addon manager → Reinforcement}}.


[[Image:Arch_Rebar_Stirrup_example.png|400px]]
[[Image:Arch_Rebar_Stirrup_example.png|400px]]
Line 24: Line 28:
</div>
</div>


<div class="mw-translate-fuzzy">
== Cum se folosește ==
== Cum se folosește ==
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 113: Line 119:
100, 4, 14, 8, True, 8)
100, 4, 14, 8, True, 8)
}}
}}
<div class="mw-translate-fuzzy">
{{docnav/ro|[[Arch_Rebar_BentShape/ro|Bent Shape Rebar]]|[[Arch_Rebar_Helical/ro|Helical Rebar]]|[[Arch_Module/ro|Arch]]|IconL=Arch_Rebar_BentShape.svg |IconC=Workbench_Arch.svg |IconR=Arch_Rebar_Helical.svg}}
{{docnav/ro|[[Arch_Rebar_BentShape/ro|Bent Shape Rebar]]|[[Arch_Rebar_Helical/ro|Helical Rebar]]|[[Arch_Module/ro|Arch]]|IconL=Arch_Rebar_BentShape.svg |IconC=Workbench_Arch.svg |IconR=Arch_Rebar_Helical.svg}}
</div>


{{Arch Tools navi/ro}}
{{Arch Tools navi/ro}}

Revision as of 09:30, 4 February 2020

Arch Rebar Stirrup

poziția meniului
Arch → Rebar tools
Ateliere
Arch, BIM
scurtătură
nici unul
Prezentat în versiune
0.17
A se vedea, de asemenea,
Helical Rebar, Rebar

Descriere

Instrumentul Stirrup Rebar permite utilizatorului să creeze un

stirrup reinforcing bar în elementul de structură.

This command is part of the Reinforcement Addon, that you can install with the Addon Manager, via the menu Tools → Addon manager → Reinforcement.

Cum se folosește

  1. Creează un element structure
  2. Select any face of the structure
  3. Then select Stirrup Rebar from the rebar tools
  4. A task panel will pop-out on the left side of the screen as shown below
  5. Select the desired orientation
  6. Give the inputs like left cover, right cover, top cover, bottom, front cover, bent angle, bent factor, rounding and diameter of the rebar
  7. Select the mode of distribution either amount or spacing
  8. If spacing is selected, a user can also opt for custom spacing
  9. Pick selected face is used to verify or change the face for rebar distribution
  10. Click OK or Apply to generate the rebars
  11. Click pe Cancel ieșirea din task panel

Taskview panel for the Arch Rebar Stirrup tool

Proprietăți

  • DateFront Cover: Distanța dintre armături și fațetele selectate.
  • DateRight Cover: Distanța între capătul dintre capătul dreapta al armăturii și fațeta dreapta a structurii.
  • DateLeft Cover: Distanța dintre capătul din stânga al armăturii și fațeta stângă a structurii
  • DateBottom Cover: Distanța dintre armătură și fațeta de jos a structurii.
  • DateTop Cover: Distanța dintre armătură și fața superioară a structurii.
  • DateBent Angle: Bent angle defines the angle at the ends of a stirrup.
  • DateBent Factor: Bent Factor defines length of stirrup end.
  • DateAmount: Cantitatea de armătură
  • DateSpacing: Distanța dintre acele fiecărei bare.

Scrip-Programare

Instrumentul Stirrup Rebar poate fi utilizat în macros și de la consola Python prin utilizarea următoarei funcției:

Rebar = makeStirrup(l_cover, r_cover, t_cover, b_cover, f_cover,
                    bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
                    structure=None, facename=None)
  • Adds a Stirrup reinforcing bar object to the given structural object.
  • If no Structure and Facename is given, it will take user selected face as input.
  • Here CoverAlong argument is having type tuple.
  • Returns the new Rebar object.

Exemplu: Crearea unei armături tip Stirrup rebar.

import Draft, Arch, Stirrup

# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure = Arch.makeStructure(Rect, height=1600)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = Stirrup.makeStirrup(20, 20, 20, 20, 20,
                            115, 4, 8, 2, True, 10, Structure, "Face6")

Schimbarea proprietăților barei Stirrup.

editStirrup(Rebar, l_cover, r_cover, t_cover, b_cover, f_cover,
            bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
            structure=None, facename=None)
  • Rebar is a previously created StirrupRebar object.
  • The other parameters are the same as required by the makeStirrup() function.
  • structure and facename may be omitted so that the rebar stays in the original structure.
import Stirrup

Stirrup.editStirrup(Rebar, 20, 20, 20, 20, 50,
                    100, 4, 14, 8, True, 8)