Arch Rebar/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "== Extensii disponibile ==")
(Updating to match new version of source page)
(25 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
<languages/>
<div class="mw-translate-fuzzy">
{{GuiCommand|Name=Arch Rebar|Workbenches=[[Arch Module|Arch]]|MenuLocation=Arch → Rebar|Shortcut=R B|SeeAlso=[[Arch Structure|Arch Structure]]}}
{{GuiCommand/ro|Name=Arch Rebar|Name/ro=Arch Rebar|Workbenches=[[Arch Module/ro|Arch]]|MenuLocation=Arch → Rebar|Shortcut=R B|SeeAlso=[[Arch Structure/ro|Arch Structure]]}}
</div>

<div class="mw-translate-fuzzy">
{{GuiCommand/ro|Name=Arch Rebar|Name/ro=Arch Rebar|Workbenches=[[Arch Module/ro|Arch]]|MenuLocation=Arch → Rebar|Shortcut=R B|SeeAlso=[[Arch Structure/ro|Arch Structure]]}}
</div>


==Descriere==
==Descriere==


<div class="mw-translate-fuzzy">
Instrumentul Rebar vă permite să plasați barele de armătură [http://en.wikipedia.org/wiki/Rebar] în interiorul obiectelor [[Arch Structure]]. Obiectele bare de armătură sunt bazate pe profilele 2D, cum ar fi [[Sketcher Module | sketches]] sau [[Draft Module | draft objects]], care trebuie să fie desenate pe o față a unui obiect de structură. Puteți apoi să reglați configurația armăturilor, cum ar fi numărul și diametrul barelor sau distanța de decalaj dintre cele două capete ale elementului structural.
Instrumentul Rebar vă permite să plasați barele de armătură [http://en.wikipedia.org/wiki/Rebar] în interiorul obiectelor [[Arch Structure]]. Obiectele bare de armătură sunt bazate pe profilele 2D, cum ar fi [[Sketcher Module | sketches]] sau [[Draft Module | draft objects]], care trebuie să fie desenate pe o față a unui obiect de structură. Puteți apoi să reglați configurația armăturilor, cum ar fi numărul și diametrul barelor sau distanța de decalaj dintre cele două capete ale elementului structural.
</div>


The [[Arch_Rebar|Arch Rebar]] tool is also integrated into [[BIM_Workbench|BIM Workbench]].
[[Image:Arch Rebar example.jpg|400px]]


Rebar objects are based on 2D profiles such as [[Draft Workbench|Draft objects]] and [[Sketcher Workbench|Sketches]], that must be drawn on a face of the structural object. After creation you can adjust the properties of the rebar, including the number and diameter of the bars, and the offset distance between them and the faces of the structural element.

[[Image:Arch Rebar example.jpg|400px]]
<div class="mw-translate-fuzzy">
Imaginea de mai sus prezintă un obiect structural, în care sunt desenate două schițe, care definesc două diagrame de bare. Aceste două schițe sunt apoi transformate în obiecte de armătură.
Imaginea de mai sus prezintă un obiect structural, în care sunt desenate două schițe, care definesc două diagrame de bare. Aceste două schițe sunt apoi transformate în obiecte de armătură.
</div>


== Extensii disponibile ==
== Extensii disponibile ==


<div class="mw-translate-fuzzy">
The Rebar tool has been greatly enhanced during the [[Google Summer of Code]] 2017 edition. The result of that work is a series of new presets and wizards for the most common rebar types. They are packaged under an independent module called '''Reinforcement''', that you can install via menu Tools -> Addons Manager. Once the Reinforcement addon is installed, on next run, FreeCAD will detect it and add a series of new tools under the Rebar button in the Arch toolbar and menu:
Instrumentul Rebar a fost mult îmbunătățit în timpul ediției din 2017 a [[Google Summer of Code]] . Rezultatul acestei lucrări este o serie de noi presetări și vrăjitori/asistenți pentru cele mai comune tipuri de bare. Acestea sunt ambalate sub un modul independent numit '''Reinforcement''', pe care îl puteți instala prin meniul Tools -> Addons Manager. Odată ce aplicația Addon Reinforcement este instalată, la următoarea rulare, FreeCAD o va detecta și va adăuga o serie de instrumente noi sub butonul Rebar din bara de instrumente Arch și meniul:
</div>


<div class="mw-translate-fuzzy">
* [[Image:Arch_Rebar_Straight.png|32px]] [[Arch_Rebar_Straight|Straight Rebar]]: Creates a Straight reinforcement bar in a selected structural element
== Cum se folosește ==
* [[Image:Arch_Rebar_UShape.png|32px]] [[Arch_Rebar_UShape|UShape Rebar]]: Creates a UShape reinforcement bar in a selected structural element
</div>
* [[Image:Arch_Rebar_LShape.png|32px]] [[Arch_Rebar_LShape|LShape Rebar]]: Creates a LShape reinforcement bar in a selected structural element
* [[Image:Arch_Rebar_BentShape.png|32px]] [[Arch_Rebar_BentShape|Bent Shape Rebar]]: Creates a Bent Shape reinforcement bar in a selected structural element
* [[Image:Arch_Rebar_Stirrup.png|32px]] [[Arch_Rebar_Stirrup|Stirrup Rebar]]: Creates a Stirrup reinforcement bar in a selected structural element
* [[Image:Arch_Rebar_Helical.png|32px]] [[Arch_Rebar_Helical|Helical Rebar]]: Creates a Helical reinforcement bar in a selected structural element


<div class="mw-translate-fuzzy">
==How to use==
# Creați un elemente de [[Arch Structure|structure]]

# Create a [[Arch Structure|structure]] element
# Switch to the [[Sketcher Workbench]]
# Switch to the [[Sketcher Workbench]]
# Select one face of the structural element
# Select one face of the structural element
Line 32: Line 43:
# Select the sketch you just drew
# Select the sketch you just drew
# Press the {{KEY|[[Image:Arch Rebar.png|16px]] [[Arch Rebar]]}} button, or press {{KEY|R}} then {{KEY|B}} keys
# Press the {{KEY|[[Image:Arch Rebar.png|16px]] [[Arch Rebar]]}} button, or press {{KEY|R}} then {{KEY|B}} keys
# Reglați proprietățile dorite (armăturae dvs. ar putea să nu apară imediat dacă unele dintre proprietăți creează o situație imposibilă, cum ar fi diametrul barei fiind 0 sau distanțele dispuse mai mari decât lungimea elementului structural)
# Adjust the desired properties (your rebar might not appear immediately, if some of the properties create an impossible situation, such as the bar diameter being 0, or the offset distances being bigger than the length of the structural element)
</div>


Although normally a rebar is used inside an Arch Structure, since FreeCAD 0.19 the rebar can be created outside of any host object. To host a rebar inside an object, you just need to set its {{PropertyData|Host}}.
==Options==


== Opţiuni ==
* Rebars share the common properties and behaviours of all [[Arch Component|Arch Components]]

*Barele partajează proprietățile și comportamentele comune ale tuturor [[Arch Component|Arch Components]]
* The rounding value is expressed in times the diameter. If your bar has a diameter of 5mm, a rounding value of 3 will create rounding at angles with a radius of 15mm.
* The rounding value is expressed in times the diameter. If your bar has a diameter of 5mm, a rounding value of 3 will create rounding at angles with a radius of 15mm.
* Default values for new rebars can be set in the Arch preferences settings.
* Default values for new rebars can be set in the Arch preferences settings.
* If a direction vector is not specified, the direction and distance along which the bars will spread is calculated automatically from the host structural object, by taking the normal direction of the base sketch, and taking its intersection with the structural object. If you specify a direction vector, the length of that vector will also be taken into account.
* If a direction vector is not specified, the direction and distance along which the bars will spread is calculated automatically from the host structural object, by taking the normal direction of the base sketch, and taking its intersection with the structural object. If you specify a direction vector, the length of that vector will also be taken into account.
* Valoarea distanței este calculată din cantitatea curentă de bare și reprezintă distanța dintre axele fiecărei bare. Prin urmare, trebuie să scădeți diametrul barei pentru a obține dimensiunea spațiului liber dintre bare.
* The spacing value is calculated from the current amount of bars, and represents the distance between the axes of each bar. You must therefore subtract the bar diameter to obtain the size of the free space between bars.


==Properties==
==Proprietăți==


* {{PropertyData|Amount}}: The amount of bars.
* {{PropertyData|Amount}}: Cantitatea de bare.
* {{PropertyData|Diameter}}: The diameter of the bars.
* {{PropertyData|Diameter}}: The diameter of the bars.
* {{PropertyData|Direction}}: The direction (and length) along which the bars must spread. If the value is (0,0,0), the direction is calculated automatically from the host structural object.
* {{PropertyData|Direction}}: The direction (and length) along which the bars must spread. If the value is (0,0,0), the direction is calculated automatically from the host structural object.
Line 50: Line 64:
* {{PropertyData|Offset End}}: The offset distance between the border of the structural object and the last bar.
* {{PropertyData|Offset End}}: The offset distance between the border of the structural object and the last bar.
* {{PropertyData|Rounding}}: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
* {{PropertyData|Rounding}}: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
* {{PropertyData|Spacing}}: The distance between the axes of each bar.
* {{PropertyData|Spacing}}: Distanța dintre axele fiecărei bare.


<div class="mw-translate-fuzzy">
==Scripting==
== Scrip-Programare ==
</div>


<div class="mw-translate-fuzzy">
The Rebar tool can by used in [[macros]] and from the python console by using the following function:
Instrumentul Rebar poate fi folosit în [[macros]] și din consola python utilizând următoarea funcție:
</div>
{{Code|code=
{{Code|code=
makeRebar (structure,sketch,[diameter],[amount],[offset])
Rebar = makeRebar(baseobj=None, sketch=None, diameter=None, amount=1, offset=None, name="Rebar")
}}
}}


<div class="mw-translate-fuzzy">
* Adds a Reinforcing Bar object to the given structural object, using the given sketch as profile.
* Adăugă un obiect Bar armare la obiectul structural dat, utilizând schița dată ca profil.
* If no diameter, amount or offset value is given, the default values from the Arch preferences settings are applied.
* Dacă nu este indicat niciun diametru, valoare sau valoare de compensare, se aplică valorile implicite din setările preferințelor Arch.
* Returns the new Rebar object.
* Returnează noul obiect Rebar.
</div>

Exempluː


Example:
{{Code|code=
{{Code|code=
import FreeCAD, Arch, Sketcher, PArt
import FreeCAD, Arch, Part

struct = Arch.makeStructure(1,1,3)
Structure = Arch.makeStructure(None, length=1000, width=1000, height=3000)
sketch = FreeCAD.ActiveDocument.addObject('Sketcher::SketchObject','Sketch')
Structure.ViewObject.Transparency = 80
sketch.Support = (struct,["Face6"])
FreeCAD.ActiveDocument.recompute()
sketch.addGeometry(Part.Line(App.Vector(-0.4,0.4,0),App.Vector(0.4,0.4,0)))

Arch.makeRebar(structure,sketch)
p1 = FreeCAD.Vector(-400, 400, 0)
p2 = FreeCAD.Vector(400, 400, 0)
Sketch = FreeCAD.ActiveDocument.addObject('Sketcher::SketchObject', 'Sketch')
Sketch.MapMode = "FlatFace"
Sketch.Support = [(Structure, "Face6")]
Sketch.addGeometry(Part.LineSegment(p1, p2))
FreeCAD.ActiveDocument.recompute()

Rebar = Arch.makeRebar(Structure, Sketch, diameter=80, amount=7, offset=50)
Rebar.OffsetStart = 100
Rebar.OffsetEnd = 100
FreeCAD.ActiveDocument.recompute()
}}
}}

<div class="mw-translate-fuzzy">
[[Category:Arch/ro]]
</div>

{{Arch Tools navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
[[Category:External Command Reference{{#translation:}}]]
[[Category:Reinforcement{{#translation:}}]]

Revision as of 20:00, 23 September 2020

Arch Rebar

poziția meniului
Arch → Rebar
Ateliere
Arch
scurtătură
R B
Prezentat în versiune
-
A se vedea, de asemenea,
Arch Structure

Arch Rebar

poziția meniului
Arch → Rebar
Ateliere
Arch
scurtătură
R B
Prezentat în versiune
-
A se vedea, de asemenea,
Arch Structure

Descriere

Instrumentul Rebar vă permite să plasați barele de armătură [1] în interiorul obiectelor Arch Structure. Obiectele bare de armătură sunt bazate pe profilele 2D, cum ar fi sketches sau draft objects, care trebuie să fie desenate pe o față a unui obiect de structură. Puteți apoi să reglați configurația armăturilor, cum ar fi numărul și diametrul barelor sau distanța de decalaj dintre cele două capete ale elementului structural.

The Arch Rebar tool is also integrated into BIM Workbench.

Rebar objects are based on 2D profiles such as Draft objects and Sketches, that must be drawn on a face of the structural object. After creation you can adjust the properties of the rebar, including the number and diameter of the bars, and the offset distance between them and the faces of the structural element.

Imaginea de mai sus prezintă un obiect structural, în care sunt desenate două schițe, care definesc două diagrame de bare. Aceste două schițe sunt apoi transformate în obiecte de armătură.

Extensii disponibile

Instrumentul Rebar a fost mult îmbunătățit în timpul ediției din 2017 a Google Summer of Code . Rezultatul acestei lucrări este o serie de noi presetări și vrăjitori/asistenți pentru cele mai comune tipuri de bare. Acestea sunt ambalate sub un modul independent numit Reinforcement, pe care îl puteți instala prin meniul Tools -> Addons Manager. Odată ce aplicația Addon Reinforcement este instalată, la următoarea rulare, FreeCAD o va detecta și va adăuga o serie de instrumente noi sub butonul Rebar din bara de instrumente Arch și meniul:

Cum se folosește

  1. Creați un elemente de structure
  2. Switch to the Sketcher Workbench
  3. Select one face of the structural element
  4. Press the New Sketch button to start a new sketch on the selected face
  5. Draw the diagram of your bar
  6. Press the Leave Sketch button to finish
  7. Switch back to the Arch Workbench
  8. Select the sketch you just drew
  9. Press the Arch Rebar button, or press R then B keys
  10. Reglați proprietățile dorite (armăturae dvs. ar putea să nu apară imediat dacă unele dintre proprietăți creează o situație imposibilă, cum ar fi diametrul barei fiind 0 sau distanțele dispuse mai mari decât lungimea elementului structural)

Although normally a rebar is used inside an Arch Structure, since FreeCAD 0.19 the rebar can be created outside of any host object. To host a rebar inside an object, you just need to set its DateHost.

Opţiuni

  • Barele partajează proprietățile și comportamentele comune ale tuturor Arch Components
  • The rounding value is expressed in times the diameter. If your bar has a diameter of 5mm, a rounding value of 3 will create rounding at angles with a radius of 15mm.
  • Default values for new rebars can be set in the Arch preferences settings.
  • If a direction vector is not specified, the direction and distance along which the bars will spread is calculated automatically from the host structural object, by taking the normal direction of the base sketch, and taking its intersection with the structural object. If you specify a direction vector, the length of that vector will also be taken into account.
  • Valoarea distanței este calculată din cantitatea curentă de bare și reprezintă distanța dintre axele fiecărei bare. Prin urmare, trebuie să scădeți diametrul barei pentru a obține dimensiunea spațiului liber dintre bare.

Proprietăți

  • DateAmount: Cantitatea de bare.
  • DateDiameter: The diameter of the bars.
  • DateDirection: The direction (and length) along which the bars must spread. If the value is (0,0,0), the direction is calculated automatically from the host structural object.
  • DateOffset Start: The offset distance between the border of the structural object and the first bar.
  • DateOffset End: The offset distance between the border of the structural object and the last bar.
  • DateRounding: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
  • DateSpacing: Distanța dintre axele fiecărei bare.

Scrip-Programare

Instrumentul Rebar poate fi folosit în macros și din consola python utilizând următoarea funcție:

Rebar = makeRebar(baseobj=None, sketch=None, diameter=None, amount=1, offset=None, name="Rebar")
  • Adăugă un obiect Bar armare la obiectul structural dat, utilizând schița dată ca profil.
  • Dacă nu este indicat niciun diametru, valoare sau valoare de compensare, se aplică valorile implicite din setările preferințelor Arch.
  • Returnează noul obiect Rebar.

Exempluː

import FreeCAD, Arch, Part

Structure = Arch.makeStructure(None, length=1000, width=1000, height=3000)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

p1 = FreeCAD.Vector(-400, 400, 0)
p2 = FreeCAD.Vector(400, 400, 0)
Sketch = FreeCAD.ActiveDocument.addObject('Sketcher::SketchObject', 'Sketch')
Sketch.MapMode = "FlatFace"
Sketch.Support = [(Structure, "Face6")]
Sketch.addGeometry(Part.LineSegment(p1, p2))
FreeCAD.ActiveDocument.recompute()

Rebar = Arch.makeRebar(Structure, Sketch, diameter=80, amount=7, offset=50)
Rebar.OffsetStart = 100
Rebar.OffsetEnd = 100
FreeCAD.ActiveDocument.recompute()