Arch Calepinage

From FreeCAD Documentation
Revision as of 09:45, 5 May 2018 by Mario52 (talk | contribs) (Created page with "L'image ci-dessus montre une série de formes avant et après l'opération d'imbrication")

Arch Nest

Emplacement du menu
Arch → Panel tools → Nest
Ateliers
Arch
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

L'outil Nest permet de sélectionner une forme plane pour en faire un conteneur, et une série d'autres formes planes à disposer à l'intérieur de l'espace défini par la forme du conteneur. Ceci est généralement nécessaire pour les opérations sur machines CNC, où vous voulez découper une série de pièces dans un panneau de base, et devez organiser ces pièces de la manière la plus compacte possible pour qu'elles occupent moins d'espace sur le panneau.

L'algorithme qui gère l'outil Nest est en constante évolution et n'est actuellement pas entièrement optimisé. À l'avenir, la performance de cet outil devrait devenir bien meilleure.

L'image ci-dessus montre une série de formes avant et après l'opération d'imbrication

How to use

  1. Press the Arch Nest button
  2. Select an object to be the container. This object must be flat, and, at the moment, rectangular
  3. Click the "Pick container" button to use that object as the container
  4. Select a series of other flat objects that you wish to place inside the container. These objects must all be flat and in the same plane as the container.
  5. Adjust desired options below
  6. Start the calculation process
  7. At the end of the calculation, click the Preview button to create a temporary preview of the result.
  8. If you wish to apply the result (move and rotate the actual shapes into place), click OK.

Notes

  • All objects must have a face
  • At the moment the tool will only work with flat objects that all have the same orientation.
  • At the moment, the container must be rectangular.
  • At the moment, margin / spacing between the pieces is not implemented yet
  • The calculation can take a lot of time with many objects. That will be optimized in the future