Arch CutPlane/ru

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This page is a translated version of the page Arch CutPlane and the translation is 29% complete.

Outdated translations are marked like this.

Other languages:

PipeConnector

CutLine

Архитектурный верстак "Arch"

Системное название
Arch CutPlane
Arch CutPlane
Расположение в меню
Архитектура → Срезать по плоскости образца
Верстаки
Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Удалить компонент

Описание

Инструмент Cut Plane позволяет обрезать объект Arch в соответствии с плоскостью:

Вы можете обрезать объект Arch выделенной гранью, нормальной или противоположной плоскости фасада.
Это создаёт для объекта Arch компонент для вычитания CutVolume

Left: Before applying the CutPlane tool. Middle: resulting wall after the cut is done. Right: yet another optional result

Применение

If the cutting plane is to be derived from a straight edge (introduced in version 0.22) optionally align the working plane:
- The selected edge cannot be parallel to the normal of the working plane.
- The generated cutting face will be perpendicular to the working plane.
Select the object to be cut.
Do one of the following:
- Select an object with a single planar face. introduced in version 0.22
- Select a planar face in the 3D view.
- Select an object with a single straight edge. introduced in version 0.22
- Select a straight edge in the 3D view. introduced in version 0.22
There are several ways to invoke the command:
- Press the Cut with plane button.
- Select the Arch → Cut with plane option from the menu.
Choose Behind or Front to indicate on which side of the cutting face material should be removed.
Press the OK button.

Программирование

See also: Arch API and FreeCAD Scripting Basics.

The CutPlane tool can be used in macros and from the Python console by using the following function:

cutObj = cutComponentwithPlane(archObject, cutPlane, sideFace)

Creates a cutObj object from the given archObject, which is cut by cutPlane, which is the face of another object.
- archObject should be a SelectionObject obtained from FreeCADGui.Selection.SelectionEx()[0].
- cutPlane should be a FaceObject obtained from FreeCADGui.Selection.SelectionEx()[0].SubObjects[0].
sideFace specifies on which side of the FaceObject a volume will be created; this volume will then be used to subtract from the archObject. If sideFace is 0 it will create a volume in the rear of the face, otherwise it create it in front of the face.

Пример:

import FreeCAD, FreeCADGui, Draft, Arch

p1 = FreeCAD.Vector(0, 0, 0)
p2 = FreeCAD.Vector(2000, 2000, 0)

Line = Draft.makeWire([p1, p2])
Wall = Arch.makeWall(Line, width=150, height=2000)

p3 = FreeCAD.Vector(0, 2000, 0)
p4 = FreeCAD.Vector(3000, 0, 0)

Line2 = Draft.makeWire([p3, p4])
Wall2 = Arch.makeWall(Line2, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()

# Select the Wall
main_object = FreeCADGui.Selection.getSelectionEx()[0]

# Select the face of Wall2
selection = FreeCADGui.Selection.getSelectionEx()[0]
cut_face = selection.SubObjects[0]

cutObj = Arch.cutComponentwithPlane(main_object, cut_face, 0)
FreeCAD.ActiveDocument.recompute()

Wall3 = Draft.move(Wall, FreeCAD.Vector(-4000, 0, 0), copy=True)
Wall4 = Draft.move(Wall2, FreeCAD.Vector(-4000, 0, 0), copy=True)
FreeCAD.ActiveDocument.recompute()

# Select the Wall3
main_object2 = FreeCADGui.Selection.getSelectionEx()[0]

# Select the face of Wall4
selection2 = FreeCADGui.Selection.getSelectionEx()[0]
cut_face2 = selection2.SubObjects[0]

cutObj2 = Arch.cutComponentwithPlane(main_object2, cut_face2, 1)
FreeCAD.ActiveDocument.recompute()