Washers

From FreeCAD Documentation
Jump to navigation Jump to search

This documentation is not finished. Please help and contribute documentation.

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Some way to create a washer


Comparison of some workflows to create a simple washer with FreeCAD. You can create many other workflows.

Version workflow move the washer, placement change the shape note
washer1

Washer1a.png Washer1b.png

Part->Cut(cylinder001-cylinder)

Part->Fillet

Can be moved Fillet, Cylinder001 and Cylinder Edit Cylinder001 and Cylinder If it is moved only Cylinder001 or Cylinder you create an eccentric washer
washer2

Washer2a.png

Sketcher->Create a new

PartDesign->Pad(sketch) PartDesign->Fillet

placement is greyed out, to move the washer move the sketch to change the shape simply edit the sketch
washer3

Washer3a.png

Sketcher->Create a new

PartDesign->Revolve(sketch) PartDesign->Fillet

move the sketch to change the shape simply edit the sketch allows you to easily create portions of washers
washer4

Washer4a.png

Sketcher->Create a new

PartDesign->Revolve(sketch)

move the sketch to change the shape simply edit the sketch as washer3 but with the fillets included in the sketch
washer5

Washer5a.png

PartDesign->Cylinder)

Sketcher->Create a new PartDesign->Pocket(sketch) PartDesign->Fillet

placement greyed out, to move the washer move the sketch edit Cylinder or edit sketch move sketch001 does not change anything (automatic reset), you must edit the sketch
washer6

Washer6a.png

PartDesign->Cylinder

Sketcher->Create a new PartDesign->Pocket(sketch) PartDesign->Fillet

placement greyed out, to move the washer move the sketch edit Cylinder or edit sketch move sketch does not change anything, you must edit the sketch



....... to be continued .......

Other

Split washer WasherSplit1a.png

Using Draft WasherDraft1a.png


Washer1a.png 
Washer1b.png
Washer2a.png
Washer3a.png
Washer4a.png
Washer5a.png
Washer6a.png