Translations:Sketcher Workbench/17/cs
Jump to navigation
Jump to search
Sketcher Geometries
These are tools for creating objects.
Bod: Draws a point
Oblouk: Draws an arc segment from center, radius, start angle and end angle
Kružnice: Draws a circle from center and radius
2-Bod Přímka: Draws a line segment from 2 points
Lomená čára (multiple-point line): Draws a line made of multiple line segments
Obdélník: Draws a rectangle from 2 opposite points
Zaoblení: Makes a fillet between two lines joined at one point. Select both lines or click on the corner point, then activate the tool.
Oříznutíí: Trims a line, circle or arc with respect to the clicked point.
Povrchový Náčrt: Creates an edge linked to external geometry.
Změna konst.módu: Toggles an element to/from construction mode. A construction object will not be used in a 3D geometry operation.
Sketcher Constraints
Constraints are used to set rules between sketch elements, and to lock the sketch along the vertical and horizontal axes.
Lock: Creates a lock constraint on the selected item by setting vertical and horizontal dimensions relative to the origin (dimensions can be edited afterwards).
Coincident: Creates a coincident (point-on-point) constraint between two selected points.
Point On Object: Creates a point-on-object constraint on selected items.
Horizontal Distance: Fixes the horizontal distance between 2 points or line ends. If only one item is selected, the distance is set to the origin.
Vertical Distance: Fixes the vertical distance between 2 points or line ends. If only one item is selected, the distance is set to the origin.
Vertical: Creates a vertical constraint to the selected lines or polylines elements. More than one object can be selected.
Horizontal: Creates a horizontal constraint to the selected lines or polylines elements. More than one object can be selected.
Length: Creates a length constraint on a selected line.
Radius: Creates a radius constraint on a selected arc or circle.
Parallel: Creates a parallel constraint between two selected lines.
Perpendicular: Creates a perpendicular constraint between two selected lines.
InternalAngle: Creates an internal angle constraint between two selected lines.
Tangent: Creates a tangent constraint between two selected entities, or a colinear constraint between two line segments.
Equal Length: Creates an equality constraint between two selected entities. If used on circle or arcs, the radius will be set equal.
Symmetric: Creates a symmetric constraint between 2 points with respect to a line.
Other
New Sketch: Creates a new sketch on a selected face or plane. If none were selected, the default work plane XY will be used.
View sketch: Sets the model view perpendicular to the sketch plane.
Map sketch: maps a sketch to the previously selected face of a solid.
Leave Sketch: Leave the Sketch editing mode.- Sketcher Reorient: Allows you to change the position of a sketch
