From FreeCAD Documentation
- 4.6. Select one horizontal line, and press
Horizontal distance, then enter 20 mm. We see that the other horizontal line changes size at the same time.
- 4.7. Select one vertical line, and press
Vertical distance, then enter 20 mm. We see that the other vertical line changes size at the same time.
- 4.8. Select one bottom corner point (a), and the origin of the sketch, and press Horizontal distance, then enter
10 mm.
- 4.9. Select the top corner point (b) above the previous corner point (a), and the origin of the sketch, and press Vertical distance, then enter
10 mm.
