Translations:SheetMetal Examples/25/en

1. Create a profile (a line and a tangent arc), preferably using the Sketcher Workbench.
2. Activate the Make Base Wall command to create a BaseBend object.
3. Edit the BaseBend object's parameters:
   • Set DataMid Plane to trueto let the profile extend symmetrically to both sides of the sketch plane.
   • Set Dataradius and Datathickness to values of your choice.
4. Create a cut-out contour with the Sketcher Workbench.
5. Use the PartDesign Pocket command to cut off one half of the Round bit.
6. Create a hole pattern with the Sketcher Workbench.
7. Use the PartDesign Hole command. Avoid the countersink and counterbore options to keep the body unfoldable.
8. Activate the Unfold command to get an Unfold object.
9. Done!