Translations:Manual:BIM modeling/10/en
- Create a new document, and switch to the Arch Workbench.
- Open menu Edit → Preferences → Draft → Grid and Snapping and set:
- Main lines every
10
. - Grid spacing
1000mm
to have a one meter-based grid, which is convenient for the size of our building. - Grid size
100 lines
.
- Main lines every
- On the snapping toolbar make sure the grid snap button is enabled, so we can use the grid as much as possible.
- If you do not see the axes then click the toggle draft grid button.
- Set the Working Plane to XY plane
- Zoom out and pan so you can see the area from (0,0) to (4,3). See the Mouse navigation for instructions.
- Draw four lines with the Draft Line tool. You can enter coordinates manually, or simply pick the points on the grid with the mouse:
- From point (0,0) to point (0,3)
- From point (0,3) to point (4,3)
- From point (4,3) to point (4,0)
- From point (4,0) to point (0,0)
NOTE: Due to a bug in version 0.18, make sure you do the lines in this order and this direction.