Translations:Getting started/16/qqq
O FreeCAD tem tres modos de orientação diferentes, que podem ser definidos na caixa das preferências ou mudadas clicando com o botão direito na janela 3D. Os detalhes completos estão na página Modos do rato. No modo por defeito ("Navegação CAD"), os comandos são os seguintes
Select | Pan | Zoom | Rotate View | Rotate View
Alternate Method |
---|---|---|---|---|
Press the left mouse button over an object you want to select. Holding down ctrl allows the selection of multiple objects. | Click the middle mouse button and move the object around to pan | Use the mouse wheel to zoom in and out. | Click first with the middle mouse button, hold it down, and then click the left mouse button and drag the mouse in the desired direction. The cursor location at the middle mouse button click determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the object continues spinning, if this is enabled. A double click with the middle mouse button sets a new center of rotation. | Click first with the middle mouse button, hold it down, and then click the right mouse button and drag the mouse in the desired direction. This method works just like the previously described Rotate View that uses Middle Mouse Button + Left Mouse Button, except that the middle mouse button may be released after the right mouse button is pressed. Users who use the mouse with their right hand may find this Rotate View method easier than the previous method. |
Press and hold Ctrl key and click and release right mouse button to pan (rev 0.14) | Once in Pan mode, press and release left mouse button to Zoom, to exit back to pan mode press and release right mouse button (rev 0.14) | Once in Pan mode, click and momentary hold left mouse button to rotate, to exit back to pan mode press and release right mouse button (rev 0.14) |
Há também várias pré-definições para as vistas (vista de cima, de frente, etc) disponíveis no menu Vista e na barrsa de ferramentas Vista, e através de atalhos do teclado (1, 2, etc...)
desenho 2D
Insert the Draft tools here
Creating 3D Parts
Insert the Part tools here
Exporting to 2D Drawings
Insert the Drawing tools here