# Template:Sketcher Tools/cs

#### Sketcher Geometries

These are tools for creating objects.

• Bod: Draws a point
• Oblouk: Draws an arc segment from center, radius, start angle and end angle
• Kružnice: Draws a circle from center and radius
• 2-Bod Přímka: Draws a line segment from 2 points
• Lomená čára (multiple-point line): Draws a line made of multiple line segments
• Obdélník: Draws a rectangle from 2 opposite points
• Zaoblení: Makes a fillet between two lines joined at one point. Select both lines or click on the corner point, then activate the tool.
• Oříznutíí: Trims a line, circle or arc with respect to the clicked point.
• Povrchový Náčrt: Creates an edge linked to external geometry.
• Změna konst.módu: Toggles an element to/from construction mode. A construction object will not be used in a 3D geometry operation.

#### Sketcher Constraints

Constraints are used to set rules between sketch elements, and to lock the sketch along the vertical and horizontal axes.

• Lock: Creates a lock constraint on the selected item by setting vertical and horizontal dimensions relative to the origin (dimensions can be edited afterwards).
• Coincident: Creates a coincident (point-on-point) constraint between two selected points.
• Point On Object: Creates a point-on-object constraint on selected items.
• Horizontal Distance: Fixes the horizontal distance between 2 points or line ends. If only one item is selected, the distance is set to the origin.
• Vertical Distance: Fixes the vertical distance between 2 points or line ends. If only one item is selected, the distance is set to the origin.
• Vertical: Creates a vertical constraint to the selected lines or polylines elements. More than one object can be selected.
• Horizontal: Creates a horizontal constraint to the selected lines or polylines elements. More than one object can be selected.
• Length: Creates a length constraint on a selected line.
• Radius: Creates a radius constraint on a selected arc or circle.
• Parallel: Creates a parallel constraint between two selected lines.
• Perpendicular: Creates a perpendicular constraint between two selected lines.
• InternalAngle: Creates an internal angle constraint between two selected lines.
• Tangent: Creates a tangent constraint between two selected entities, or a colinear constraint between two line segments.
• Equal Length: Creates an equality constraint between two selected entities. If used on circle or arcs, the radius will be set equal.
• Symmetric: Creates‎ a symmetric constraint between 2 points with respect to a line.

#### Other

• New Sketch: Creates‎ a new sketch on a selected face or plane. If none were selected, the default work plane XY will be used.
• View sketch: Sets the model view perpendicular to the sketch plane.
• Map sketch: maps a sketch to the previously selected face of a solid.
• Leave Sketch: Leave the Sketch editing mode.
• Sketcher Reorient: Allows you to change the position of a sketch