Template:CAD Navigation/sv

From FreeCAD Documentation
Jump to navigation Jump to search
Select Pan Zoom Rotate View Rotate View

Alternate Method

Hand cursor.png Pan cursor.png Zoom cursor.png Rotate cursor.png Rotate cursor.png
to Select to Pan to Zoom in or out to Rotate view to Rotate view
Press the left mouse button over an object you want to select. Holding down ctrl allows the selection of multiple objects. Click the middle mouse button and move the object around to pan Use the mouse wheel to zoom in and out. Click first with the middle mouse button, hold it down, and then click the left mouse button and drag the mouse in the desired direction. The cursor location at the middle mouse button click determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the object continues spinning, if this is enabled. A double click with the middle mouse button sets a new center of rotation. Click first with the middle mouse button, hold it down, and then click the right mouse button and drag the mouse in the desired direction. This method works just like the previously described Rotate View that uses Middle Mouse Button + Left Mouse Button, except that the middle mouse button may be released after the right mouse button is pressed. Users who use the mouse with their right hand may find this Rotate View method easier than the previous method.
to Pan to Zoom to rotate
Press and hold Ctrl key and click and release right mouse button to pan (rev 0.14) Once in Pan mode, press and release left mouse button to Zoom, to exit back to pan mode press and release right mouse button (rev 0.14) Once in Pan mode, click and momentary hold left mouse button to rotate, to exit back to pan mode press and release right mouse button (rev 0.14)