Cotă Verticală TechDraw

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page TechDraw VerticalDimension and the translation is 24% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎русский
Arrow-left.svg Anteriorul: TechDraw HorizontalDimension.svg New Horizontal
Urmeaza: New Radius TechDraw RadiusDimension.svg Arrow-right.svg

TechDraw Dimension Vertical.svg TechDraw Dimension Vertical

poziția meniului
TechDraw → Dimension Vertical
Ateliere
TechDraw
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
TechDraw Dimension Length, TechDraw Dimension Horizontal

Descriere

Instrumentul pentru cote verticale adaugă o cotă verticală unei imagini. Cota poate fi între două vârfuri, lungimea unei muchii sau distanța verticală dintre două margini. Distanța va fi inițial distanța proiectată(adică așa cum este reprezentată în desen), dar această distanță poate fi înlocuită prin distanța 3D reală utilizând instrumentul Link Dimension LinkDimension.png.

VerticalSample.png

The Vertical Dimension tool adds a vertical dimension to a View. The dimension may be between two vertices, the length of one edge or the vertical distance between 2 edges. The distance will initially be the projected distance (ie as shown on the drawing), but this may be changed to the actual 3D distance using the TechDraw LinkDimension.svg TechDraw LinkDimension tool.

TechDraw Dimension Vertical example.png

Length dimension taken from two arbitrary nodes of the view; the distance is measured vertically

Cum se folosește

  1. Select the points or edge which define your measurement.
  2. Press the TechDraw VerticalDimension.svg Vertical Dimension button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.
  4. If needed, add tolerances as described in this page.

To change the properties of a dimension object either double-clicking it in the drawing or in the Tree view. This will open the dimension dialog.

Limitations

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension for more information.

Proprietăți

See TechDraw LengthDimension.

Script

Cotele verticale pot fi adăugate la Pages utilizând Python.

See also: TechDraw API and FreeCAD Scripting Basics.

The Vertical Dimension tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "DistanceX"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)


Arrow-left.svg Anteriorul: TechDraw HorizontalDimension.svg New Horizontal
Urmeaza: New Radius TechDraw RadiusDimension.svg Arrow-right.svg