TechDraw "Связать размер с 3D геометрией"

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page TechDraw LinkDimension and the translation is 48% complete.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎română • ‎русский

This documentation is not finished. Please help and contribute documentation.

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

TechDraw LinkDimension.svg Связать размер с 3D геометрией

Системное название
TechDraw_LinkDimension
Расположение в меню
TechDraw → Размеры → Связать размер с 3D геометрией
Верстаки
TechDraw
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Вставить Вид, Вставить группу проекций

Описание

The Link Dimension tool creates a link between 3D geometry and one or more existing projected Dimensions on a Page. This link allows the Dimension to use actual 3D values instead of 2D projected values.

The Link Dimension tool's most common use is in dimensioning isometric views in a ProjectionGroup. The projected length of an Edge in an isometric view will, of course, not necessarily equal the actual length of the Edge. In an orthogonal view the projected and actual lengths will be equal.

The link instructs the Dimension to compute it's value directly from the 3D geometry.

Применение

  1. Create an appropriate dimension on the drawing page using any of TechDraw LengthDimensionh, TechDraw HorizontalDimension, etc. This dimension will be in the right place on the Page, but will show the projected dimension value.
  2. Select the geometry in the 3D view, for example, an edge, that corresponds to the projected geometry of your dimension.
  3. Press the TechDraw LinkDimension.svg Link Dimension button.
  4. A dialog will open. Select one or more Dimensions to be linked to the selected 3D geometry.
  5. Press OK.

After the link operation is completed the ДанныеMeasureType property of the dimension changes from Projected to True.

Ограничения

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension for more information. It is recommended that linking dimensions be one of the last steps in your drawing process.

The link tool will not stop you from making illogical links, so you need to choose the correct edge from the 3D view when creating the link.

There is currently no way to break a link; you can change the ДанныеMeasureType back to Projected so that the dimension will use the projected value instead of the linked value.

Note that if the Dimension to be linked is based on two vertices, you should select two vertices in the 3D view. Similarly if the Dimension is based on an edge, you should select an edge in the 3D view.

Свойства

  1. The MeasureType property of a linked Dimension will be changed from "Projected" to "True".

Программирование

См. так же: TechDraw API и Основы составления скриптов FreeCAD.

The Link Dimension tool can be used in macros and from the Python console by using the following functions:

to be defined