Dimensiune Unghiulară TechDraw

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page TechDraw Dimension Angle and the translation is 6% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский

TechDraw Dimension Angle.svg TechDraw Dimension Angle

Menu location
TechDraw → Dimension Angle
Default shortcut
Introduced in version
See also


Instrumentul pentru cote unghiulare adaugă o cotă unghiulară unei imagini. Cota poate fi unghi interior, și între oricare două segment ede line draptă care formează muchii. Unghiul va fi inițial unghiul proiectat(adică așa cum este reprezentată în desen), dar aceast unghi poate fi înlocuit prin unghiul 3D real utilizând instrumentul Link Dimension LinkDimension.png.


The Dimension Angle tool adds a angular dimension to a View. The dimension may be the interior angle between any two straight line edges. The angle will initially be the projected angle (ie as shown on the drawing), but this may be changed to the actual 3D angle using the TechDraw Dimension Link.svg Link Dimension tool.

TechDraw Dimension Angle example.png

Measuring the angle between two straight lines

Cum se folosește

  1. Selectați punctele sau muchiile care definesc măsurarea dvs.
  2. Apăsați butonul Techdraw Dimension Angle.png Dimension Angle
  3. O cotă va fi adăugată la View. Cota poate fi glisată în poziția dorită.
  1. Select the points or edge which define your measurement.
  2. Press the TechDraw Dimension Angle.svg Dimension Angle button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.
  4. If needed, add tolerances as described in this page.

To change the properties of a dimension object either double-clicking it in the drawing or in the Tree view. This will open the dimension dialog.


Dimension objects are vulnerable to "topological naming" issues. See the information in the TechDraw Dimension Length.svg TechDraw Dimension Length tool for more information.


This object has the same properties as the TechDraw Dimension Length tool. See that tool for details.

This object has the same properties as the TechDraw Dimension Length tool. See that tool for details.


Cotele tip unghi pot fi adăugate la Pages utilizând Python.

See also: TechDraw API and FreeCAD Scripting Basics.

The Dimension Angle tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "Angle"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)