TechDraw Dimension Angle
|TechDraw → Dimension Angle|
|Introduced in version|
|TechDraw Dimension Angle3Pt|
The Dimension Angle tool adds a angular dimension to a View. The dimension may be the interior angle between any two straight line edges. The angle will initially be the projected angle (ie as shown on the drawing), but this may be changed to the actual 3D angle using thetool.
Measuring the angle between two straight lines
- Select the points or edge which define your measurement.
- Press the button
- A dimension will be added to the View. The dimension may be dragged to the desired position.
- If needed, add tolerances as described in this page.
This object has the same properties as the TechDraw Dimension Length tool. See that tool for details.
dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension') dim1.Type = "Angle" dim1.References2D=[(view1, 'Edge1')] rc = page.addView(dim1)