|TechDraw → Section|
|Introduced in version|
|TechDraw View, TechDraw NewProjGroup|
The Section tool creates a cross section view based on an existing part view.
Sectioning an already placed view, which shows the internal holes and a shaded cut surface
- Select a part view in the 3D window or tree.
- If you have multiple drawing pages in your document, you will also need to select the desired page in the tree.
- Press the button
- A dialog will open which will help calculate the various Section properties. The dialog calculates reasonable starting points for SectionNormal and view Direction, but these may be changed after creation for special needs.
- If you make a mistake, or change your mind while setting up the Section parameters, press the button, and you can start over.
Taskview to define the sectional cut of a view
- DataBaseView: The part view on which this ViewSection is based.
- DataSectionNormal: A vector describing the direction normal to the cutting plane.
- DataSectionOrigin: A vector describing a point on the cutting plane. Typically the centroid of the original part.
- DataFuseBeforeCut: Fuse the source shapes before performing the section cut.
- DataCutSurfaceDisplay: Appearance of cut surface - Hide, Color, SvgHatch, PatHatch.
- DataFileHatchPattern: Full path to SVG hatch pattern file.
- DataFileGeomPattern: Full path to PAT pattern file.
- DataNameGeomPattern: Name of PAT pattern to use (ignored for Svg hatch).
- ViewShowCutSurface: Highlight the section surface if true. OBSOLETE - use CutSurfaceDisplay
- ViewCutSurfaceColor: Solid color for surface highlight.
- ViewHatchColor: Color for surface hatch lines.
- ViewWeightPattern: Line weight for surface hatch lines.
Note: Section inherits all applicable View properties.
view = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewPart','View') rc = page.addView(view) view.Source = box view.Direction = (0.0,0.0,1.0) section = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewSection','Section') rc = page.addView(section) section.Source = box section.BaseView = view section.Direction = (0.0,1.0,0.0) section.SectionNormal = (0.0,0.0,1.0) section.SectionOrigin = (5.0,5.0,5.0)
- Section Line Format: both the traditional section line format (as depicted above), and the "reference arrow method" are supported. This option is controlled by the Preference setting "Mod/TechDraw/Format/SectionFormat" (see Std_DlgParameter). 0 for traditional line, 1 for reference arrow method.
- CutSurfaceDisplay: the cut surface can be hidden, painted in a solid color, hatched using an Svg pattern (default) or hatched using a PAT pattern. See Hatching.
- FuseBeforeCut: the section operation sometimes fails to cut the source shapes. If FuseBeforeCut is true, the source shapes are merged into a single shape before the section operation is attempted. If you encounter problems with the section operation, try flipping this value.