Surface: Riempi le curve del contorno

From FreeCAD Documentation
This page is a translated version of the page Surface GeomFillSurface and the translation is 18% complete.
Outdated translations are marked like this.
Other languages:

Surface GeomFillSurface

Posizione nel menu
Surface → Fill boundary curves
Ambiente
Surface
Avvio veloce
Nessuno
Introdotto nella versione
0.17
Vedere anche
Nessuno

Descrizione

Lo strumento Surface GeomFillSurface crea una superficie da due, tre o quattro bordi, cercando di creare una transizione graduale tra di loro.

Left: edges that are used to generate a surface with the GeomFillSurface tool, 4 connected edges, 3 connected edges, and 2 disconnected edges. Right: resulting surface from using the 4, 3, and 2 edges, respectively.

Utilizzo

  1. Premere il pulsante Fill boundary curves.
  2. Selezionare i bordi nella vista 3D. I bordi devono connettersi per dare un profilo chiuso.
  3. Impostare le opzioni e premere OK.

Note: once created, it is not possible to apply additional constraints to the created surface.

Opzioni

Sono disponibili tre diversi stili di riempimento: Curved, Coons, Stretch.

Proprietà

A Surface GeomFillSurface (Surface::GeomFillSurface class) is derived from the basic Part Feature (Part::Feature class, through the Part::Spline subclass), therefore it shares all the latter's properties.

In addition to the properties described in Part Feature, the Surface Filling has the following properties in the property editor.

Data

Base

DatiFill Type: L'algoritmo di riempimento applicato

  • Curved – lo stile con le porzioni più arrotondate.
  • Coons – uno stile arrotondato con meno profondità di Curva
  • Stretch – lo stile con le porzioni più piatte

View

Base

  • VistaControl Points (Bool): it defaults to false; if set to true, it will show an overlay with the control points of the surface.

Twisting of the surface

The shape of the surface depends on the direction of the chosen edges; if edges are selected and the result is a surface that "twists" on itself, one of the edges may need its list of vertices in the reverse order. A surface that twists on itself will probably have self-intersections, and thus will be an invalid Shape; this can be verified with Part CheckGeometry.

For example, if two curves have the points

curve1 = [a, b, c, d]
curve2 = [e, f, g]

and the resulting surface after using GeomFillSurface or Sections is a twisted surface, you may create a third curve that is equal to one of the two original curves but with a reversed list of points.

Either

curve1 = [a, b, c, d]
curve3 = [g, f, e]

or

curve3 = [d, c, b, a]
curve2 = [e, f, g]

should work to generate a surface that doesn't twist.

In practical terms this means that all edges used to generate a surface should be created preferably in the same clockwise or anti-clockwise direction. Following this simple rule usually guarantees that the surface will follow the smoothest direction and won't twist.

When the surface's VistaLighting property is One side, a face will be painted completely black if its normal direction points into the 3D view (away from the current viewer), indicating a flipped face with respect to the other colored faces.

Left: the boundary edges are oriented in the same direction, and thus the generated surface is smooth. Right: the boundary edges have opposite directions, and thus the generated surface twists on itself, resulting in self-intersections.

Scripting

See also: FreeCAD Scripting Basics.

The Surface GeomFillSurface tool can be used in macros and from the Python console by adding the Surface::GeomFillSurface object.

  • The edges to be used to define the surface must be assigned as a LinkSubList to the BoundaryList property of the object.
  • The type of algorithm must be assigned like a string to the FillType property.
  • All objects with edges need to be computed before they can be used as input for the properties of the GeomFillSurface object.
import FreeCAD as App
import Draft

doc = App.newDocument()

a = App.Vector(-140, -100, 0)
b = App.Vector(175, -108, 0)
c = App.Vector(200, 101, 0)
d = App.Vector(-135, 107, 70)

points1 = [a, App.Vector(-55, -91, 65), App.Vector(35, -85, -5), b]
obj1 = Draft.make_bspline(points1)

points2 = [b, App.Vector(217, -45, 55), App.Vector(217, 35, -15), c]
obj2 = Draft.make_bspline(points2)

points3 = [c, App.Vector(33, 121, 55), App.Vector(0, 91, 15), App.Vector(-80, 121, -40), d]
obj3 = Draft.make_bspline(points3)

points4 = [d, App.Vector(-140, 0, 45), a]
obj4 = Draft.make_bspline(points4)
doc.recompute()

surf = doc.addObject("Surface::GeomFillSurface", "Surface")
surf.BoundaryList = [(obj1, "Edge1"),
                     (obj2, "Edge1"),
                     (obj3, "Edge1"),
                     (obj4, "Edge1")]
doc.recompute()