Команда "Преобразование"

From FreeCAD Documentation
This page is a translated version of the page Std TransformManip and the translation is 60% complete.
Outdated translations are marked like this.

Преобразовать

Системное название
Std_TransformManip
Расположение в меню
В контекстном меню древовидного обзора проекта → Преобразовать

Правка → Преобразовать

Верстаки
Все
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Стандартные команды и инструменты

Описание

Этот инструмент позволяет вам применять к объекту приращения поворота или приращения перемещения.

Применение

  1. Select an object with a ДанныеPlacement property. See Notes.
  2. There are several ways to invoke the command:
    • Select the Edit → Transform option from the menu.
    • Select the Transform option from the Tree view context menu.
    • If edit mode is set to Transform you can also double-click the object in the Tree view.
  3. The Increments task panel opens.
  4. Optionally adjust the increments parameters.
  5. Do one or more of the following:
    • Press and hold the left mouse button on an axis arrow and drag to translate the object along that axis.
    • Press and hold the left mouse button on a plane and drag to translate the object along that plane.
    • Press and hold the left mouse button on a sphere and drag to rotate the object around that axis.
  6. Do one of the following:
    • Press the OK button to confirm and finish the command.
    • Press the Cancel button to revert the applied transformations and finish the command. introduced in version 0.22

Примечания

  • As soon as you rotate/move the object in the 3D view, changes are applied.
  • Some objects with a ДанныеPlacement property, such as sketches, cannot be manipulated, neither can objects that are attached to other objects.
  • There is no Cancel button in version 0.21 and below, in those versions you can press the OK button and use the Undo command to revert changes afterwards.