Sketcher Trimming

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher Trimming and the translation is 20% complete.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский
Arrow-left.svg Previous: Sketcher CreateFillet.svg Fillet
Next: Extend Sketcher Extend.svg Arrow-right.svg

Sketcher Trimming.svg Sketcher Trim edge

Lokalizacja w menu
Sketch → Sketcher geometries → Trim edge
Środowisko pracy
Sketcher
Domyślny skrót
brak
Wprowadzono w wersji
0.12
Zobacz także
Sketcher Extend edge


Description

This tool trims an edge to the nearest overlapping edge.

SketcherTrimExample1.png SketcherTrimExample2.png SketcherTrimExample3.png

Usage

  1. Press the Sketcher Trimming.svg trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.


Arrow-left.svg Previous: Sketcher CreateFillet.svg Fillet
Next: Extend Sketcher Extend.svg Arrow-right.svg