Sketcher SelectElementsWithDoFs/pt

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher SelectElementsWithDoFs and the translation is 25% complete.

Esta documentação não está terminada. Por favor ajude e contribua com documentação.

Veja Std ViewScreenShot para um Comando bem documentado. Gui Command dá uma boa explicação dos comandos. Veja List of Commands para outros comandos.


This documentation is not finished. Please help and contribute documentation.

See Std ViewScreenShot/pt for good documented Command. Gui Command gives an overview over commands. And see List of Commands for other commands.

Go to the FreeCAD Wiki to cotribute.

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский

Sketcher SelectElementsWithDoFs.svg Sketcher Select solver DoFs

Localização do menu
Sketch → Ferramentas de esboço (Sketcher) → Select solver DoFs
Workbenches
Sketcher
Atalho padrão
Nenhum
Veja também
Nenhum


Descrição

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Usage

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:

    Under-constrained sketch with X degrees of freedom

    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.